GE Logiq P5 User Manual
Have a look at the manual GE Logiq P5 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 GE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Monitor Display LOGIQ 5 Basic User Manual 3-51 Direction 2300002-100 Rev. 24. GE Symbol: Probe Orientation Marker. Coincides with a probe orientation marking on the probe.15. TGC. 5. Image Preview. 16. Body Pattern. 6. Gray/Color Bar. 17. Depth Scale. 7. Cine Gauge. 18. Image Management Menu: Menu, Delete, and Image Manager. 8. Measurement Summary Window. To display the Worksheet, move the Trackball to “Worksheet” and press Set. The Worksheet is displayed. To hide the Measurement Summary Window, move the Trackball to the top-left icon and press Set. The Measurement Summary Window is minimized and displays only the title line. Press Set again to maximize the display.19. Image Clipboard. 9. Image. 20. Caps Lock: On/Off. 10. Measurement. 21. System Messages Display. 11. Results Window. To move the Result Window to a different location, move the Trackball to the top-right icon in the Result Window and press Set. The Result Window then moves freely with the Trackball. Press Set again to anchor the new location. To hide the Measurement Result Window, move the Trackball to the top-left icon and press Set. The Measurement Result Window is minimized and displays only the icons. Press Set again to maximize the display.22. Trackball Functionality Status: Scroll, M&A (Measurement and Analysis), Position, Size, Scan Area Width and Tilt.
Preparing the System for Use 3-52 LOGIQ 5 Basic User Manual Direction 2300002-100 Rev. 2
LOGIQ 5 Basic User Manual 4-1 Direction 2300002-100 Rev. 2 Chapter 4 Preparing for an Exam Describes how to begin an exam.
Preparing for an Exam 4-2 LOGIQ 5 Basic User Manual Direction 2300002-100 Rev. 2 Beginning an Exam Introduction Begin an exam by entering new patient information. The operator should enter as much information as possible, such as: • Exam category • Patient name • Patient ID • Exam Information The patients name and ID number is retained with each patients image and transferred with each image during archiving or hard copy printing. CAUTIONTo avoid patient identification errors, always verify the identification with the patient. Make sure the correct patient identification appears on all screens and hard copy prints.
Beginning an Exam LOGIQ 5 Basic User Manual 4-3 Direction 2300002-100 Rev. 2 Beginning a New Patient Pressing the Patient Touch Panel key displays the Patient Screen on the monitor. This screen is also accessible from the Patient key on the control panel. Figure 4-1. Patient Touch Panel New Patient should be selected at the beginning of each new patient exam. Pressing New Patient automatically erases all patient data, annotations, measurements, calculations and worksheets of the last exam. Images are not automatically erased. A warning message appears regarding images being erased or saved.
Preparing for an Exam 4-4 LOGIQ 5 Basic User Manual Direction 2300002-100 Rev. 2 Patient Screen Figure 4-2. Patient Screen (Category: OB) 3 2 16 5 7 8 4
Beginning an Exam LOGIQ 5 Basic User Manual 4-5 Direction 2300002-100 Rev. 2 Patient Screen (continued) Enter Patient Data with the alphanumeric keyboard. To navigate through the Patient Entry menu, use the Ta b key or Trackball and Set to move and fix the cursor. Figure 4-2 shows the location of these windows on the Patient Screen. The Patient Screen details are: 1. Image Management • Patient–New Patient screen (currently selected) • Exam History–Exam History screen. • Image History–Image History screen. • Active Images–Active Images screen. 2. Category Selection • Select from 8 exam application categories: Abdomen, Obstetrics, Gynecology, Cardiology, Vascular, Urology, Small Parts or Pediatrics. When a category is selected, the measurement and category presets are displayed. 3. Function Selection • New Patient–Used to clear patient entry screen in order to input a new patient’s data into the database. • New Exam–Used to create a new exam on a current patient. • Register–Used to enter new patient information into the database prior to the actual exam being performed. REQUIRED • Exit–Used to exit Patient Menu. 4. Dataflow Selection • Select the appropriate dataflow.
Preparing for an Exam 4-6 LOGIQ 5 Basic User Manual Direction 2300002-100 Rev. 2 Patient Screen (continued) 5. Patient Information • Patient ID Number • Patient Name–Last, First and Middle • Birthdate • Age (automatically calculated when birthdate is input) • Sex 6. Patient Detail • Patient’s Address • Telephone Number • Comments Figure 4-3. Detail Window CAUTIONTo avoid patient identification errors, always verify the identification with the patient. Make sure the correct patient identification appears on all screens and hard copy prints.
Beginning an Exam LOGIQ 5 Basic User Manual 4-7 Direction 2300002-100 Rev. 2 Patient Screen (continued) 7. Exam Information • Shows the Current/Active Exam information. Information pertinent to the selected exam category appears in the window. All possible information needs to be entered. • Detail–Select the Detail box to activate/deactivate the exam details. Exam details include Indications, Comments, Admission Number, Perf. Physician’s Telephone Number, Ref. Physician’s Telephone Number and Operator Telephone Number. 8. Patient List • Lists the patients in the database. • Search key–select search item from Patient ID, Last Name, First Name, Birthdate, Sex and Last Exam date (future). • Search string–enter appropriate information. • Search from–select appropriate database. • More–gives you options like moving images, export, import and DICOM properties. • Delete–use to remove the selected patient from the database. 9. Press Register. 10. Press Scan on the Touch Panel. The patient information is displayed on the title bar.
Preparing for an Exam 4-8 LOGIQ 5 Basic User Manual Direction 2300002-100 Rev. 2 Changing Patient Information or an Exam If patient information needs to be edited, pressing Patient on either the Touch Panel or control panel enables the Patient Screen for modifying information. If the exam category needs to be changed, pressing New Exam allows modification of the Patient Screen without erasing accumulated patient images, measurements, annotations, calculations and worksheets. 1. Display the Patient screen by pressing Patient on either the Touch Panel or control panel. 2. Select patient from the Patient list. The system automatically searches to see if the patient is already in the database. • Select Search key (one of Patient Data: ID, First Name, Last Name, Birthdate, Sex or Exam Date) • Enter search string (for example, initial letter of Patient Name) • Select the database in the “Search from” box. There are two choices, searching the entire database list or searching the list currently displayed. Figure 4-4. Patient Search Key 3. The selected patient data and exam information is displayed. If patient information needs to be edited or the exam category changed, use the New Exam feature. Pressing New Exam allows modification of the Patient Screen without erasing accumulated patient images, measurements, annotations, calculations and worksheets.