Comdial Dxp Plus Instructions Manual
Have a look at the manual Comdial Dxp Plus Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 133 Comdial manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
4.1.3 E & M Tie Line Type (Complete one record sheet for each line. Copy this blank sheet as needed to provide a record for each line in the system.) Line Port__________________________________ Dialing Code(if applicable)___________________ Name_____________________________________ Feature Setting* Default Disabled Yes NoNo Music Or Tone On Hold Tone Source 1 Source 2 NoneSource 1 Ringback On Transfer Yes NoNo Privacy Release Yes NoNo SMDR Record Yes NoYes Cost Incoming Yes NoNo Incoming Cost DelayNo Delay6 sec. 12 sec. 18 sec. 24 sec. 30 sec. 36 sec. On Ans.No Delay Incoming Cost Route 1 3232 Pad Level TransmitGain 2Gain 1Nom.Loss 1Loss 2Loss 3Loss 4Loss 5Nominal Pad Level ReceiveGain 2Gain 1Nom.Loss 1Loss 2Loss 3Loss 4Loss 5Nominal Connect Mode Direct (Metalic) Carrier (Central Office)Direct Control Signalling Delay Start Immediate Start Wink StartWink Line Access Hot Line ExtensionHot Line Ext. # DialingDialing ANI Delivery Yes NoNo Call Announce Active Yes NoNo Dialing Mode Tone PulseTone Toll Groups 0 321 DTMF Level Low High NormalNormal DISA Yes NoNo DISA Voice Options 1 41 CFOS Enable Yes NoNo CFOs Private Station 1001–1480 *Mark block to match desired setting Record The Group Assignment For This Line (0-16) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 IMI66–125 DXP Plus Programming Records 4–4 Line Records
4.1.4 DID Line Types (Complete one record sheet for each line. Copy this blank sheet as needed to provide a record for each line in the system.) Line Port__________________________________DID/DNIS Block____________________ Dialing Code(if applicable)___________________ Name_____________________________________ Feature Setting* Default Disabled Yes NoNo Music Or Tone On Hold Tone Source 1 Source 2 NoneSource 1 Ringback On Transfer Yes NoNo Privacy Release Yes NoNo SMDR Record Yes NoYes Cost Incoming Yes NoNo Incoming Cost DelayNo Delay6 sec. 12 sec. 18 sec. 24 sec. 30 sec. 36 sec. On Ans.No Delay Incoming Cost Route 1 3232 Pad Level TransmitGain 2Gain 1Nom.Loss 1Loss 2Loss 3Loss 4Loss 5Nominal Pad Level ReceiveGain 2Gain 1Nom.Loss 1Loss 2Loss 3Loss 4Loss 5Nominal DID/DINS Block 1–41 *Mark block to match desired setting Record The Group Assignment For This Line (0-16) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 DXP Plus Programming Records IMI66–125 Line Records 4–5
4.1.5 E & M DNIS Line Types (Complete one record sheet for each line. Copy this blank sheet as needed to provide a record for each line in the system.) Line Port__________________________________DID/DNIS Block__________________________ Dialing Code(if applicable)___________________ Name_____________________________________ Feature Setting* Default Disabled Yes NoNo Music Or Tone On Hold Tone Source 1 Source 2 NoneSource 1 Ringback On Transfer Yes NoNo Privacy Release Yes NoNo SMDR Record Yes NoYes Cost Incoming Yes NoNo Incoming Cost DelayNo Delay6 sec. 12 sec. 18 sec. 24 sec. 30 sec. 36 sec. On Ans.No Delay Incoming Cost Route 1 3232 Pad Level TransmitGain 2Gain 1Nom.Loss 1Loss 2Loss 3Loss 4Loss 5Nominal Pad Level ReceiveGain 2Gain 1Nom.Loss 1Loss 2Loss 3Loss 4Loss 5Nominal DID/DINS Block 1–41 Call Announce Active Yes NoNo Toll Groups 1–321 *Mark block to match desired setting Record The Group Assignment For This Line (0-16) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 IMI66–125 DXP Plus Programming Records 4–6 Line Records
4.2 Line Group Programming Group Group Name Lines Assigned ARS Access 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Default: Group 1 = lines 9–16, Group 2 = lines 17–21, Group 3 = lines 25–32, Groups 4–16 = no lines assigned 4.3 Block Programming Record For Lines Model Line Matching Lines DXP Plus Programming Records IMI66–125 Line Records 4–7
4.4 System Line Record Bd. Type*PortNumberNameGrp.12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364 *Enter either DXPCO-LP4 or DXPCO-LP8 for board type Bd. Type*PortNumberNameGrp.6566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128 IMI66–125 DXP Plus Programming Records 4–8 Line Records
System Line Record—continued Bd. Type*PortNumberNameGrp.129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192 DXP Plus Programming Records IMI66–125 Line Records 4–9
4.5 DID/DNIS Block Programming 4.5.1 DID/DNIS Options Feature Choice Default Option Block Number (1–8)— Block Name (7 char. max.)— Control Signalling Wink Start Immediate Start Delay Start Wink Expected CO Digits 0–77 Dialing Mode Tone Pulse Tone ANI Delivery Yes No No DISA Voice Options 1–41 Alternate Routing—Extension 0, nnnn— Alternate Routing—Ring Code 1–81 CFOS Enable Yes NoNo Information Digits Yes NoNo * Mark each block to match your desired setting. Feature Choice Default Option Block Number (1–4)— Block Name (7 char. max.)— Control Signalling Wink Start Immediate Start Delay Start Wink Expected CO Digits 0–77 Dialing Mode Tone Pulse Tone ANI Delivery Yes No No DISA Voice Options 1–41 Alternate Routing—Extension 0, nnnn— Alternate Routing—Ring Code 1–81 CFOS Enable Yes NoNo Information Digits Yes No * Mark each block to match your desired setting. Feature Choice Default Option Block Number (1–4)— Block Name (7 char. max.)— Control Signalling Wink Start Immediate Start Delay Start Wink Expected CO Digits 0–77 Dialing Mode Tone Pulse Tone ANI Delivery Yes No No DISA Voice Options 1–41 Alternate Routing—Extension 0, nnnn— Alternate Routing—Ring Code 1–81 CFOS Enable Yes NoNo Information Digits Yes NoNo * Mark each block to match your desired setting. Feature Choice Default Option Block Number (1–4)— Block Name (7 char. max.)— Control Signalling Wink Start Immediate Start Delay Start Wink Expected CO Digits 0–77 Dialing Mode Tone Pulse Tone ANI Delivery Yes No No DISA Voice Options 1–41 Alternate Routing—Extension 0, nnnn— Alternate Routing—Ring Code 1–81 CFOS Enable No YesNo Information Digits Yes NoNo * Mark each block to match your desired setting. IMI66–125 DXP Plus Programming Records 4–10 Line Records
4.5.2 DID/DINS Translation Table (Complete one record sheet for each DID block. Copy this blank sheet as needed to provide a record for every CO digit sequence.) DID Block_______________ CO Digits Name Day Itcm. Number Night Itcm. Number Ring Code* *Default: ring code = 1 for all intercom numbers DXP Plus Programming Records IMI66–125 Line Records 4–11
4.6 DISA Configuration Programming Use the table below for recording DISA configuration parameters. Feature Setting Default Day Routing Extension Night Routing Extension Voice Mail Routing ID Lockout Time: 2, 5, 10, 15, or 30 minutes. 10 minutes RNA Timeout: 0 through 9 rings (see note below table).3 rings Maximum Reminder Timeout: 2, 5, 10, 15, or 30 minutes.10 minutes Route/Drop Invalid AccessDrop NOTE: The RNA timeout (number of rings with no answer) you select here must be less than the RNA rings that you select on the station programming record(Section 3.2). IMI66–125 DXP Plus Programming Records 4–12 Line Records
Intercom Numbers ·From the main menu, type selection number for intercom numbers and pressENTER. ·From the intercom numbers menu, type selection number for feature and pressENTER. Intercoms 1. Modify Intercoms 2. Add Intercoms 3. Remove Intercoms 4. Station Intercom Renumber Enter Selection (1-4): 5 DXP Plus Programming Records IMI66–125 Intercom Records 5–1