Home > Comdial > Communications System > Comdial Dxp Plus Instructions Manual

Comdial Dxp Plus Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Comdial Dxp Plus Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 133 Comdial manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1176
    							2.5.4 Speed Dial Records 400—499
    Dialing
    Code*Line
    Selection**Prefix*** Number****Dialing
    Code*Line
    Selection**Prefix*** Number****
    *Enter 400–499 for dialing codes 400–499
    **Enter line number, line group number, prime line/last line used—Beginning with software release 8.B,
    you can assign intercom as a preselect choice.
    ***Enter 1–128 for line or enter 1–16 for line group
    ****Enter 32 digits maximum—enter P for pause and F for hookflash
    IMI66–125DXP Plus Programming Records
    2–8  System Records 
    						
    							2.5.5 Speed Dial Records 500–599
    Dialing
    Code*Line
    Selection**Prefix*** Number****Dialing
    Code*Line
    Selection**Prefix*** Number****
    *Enter 500–599 for dialing codes 500–599
    **Enter line number, line group number, prime line/last line used—Beginning with software release 8.B,
    you can assign intercom as a preselect choice.
    ***Enter 1–128 for line or enter 1–16 for line group
    ****Enter 32 digits maximum—enter P for pause and F for hookflash
    DXP Plus Programming RecordsIMI66–125
    System Records 2–9 
    						
    							2.6 Timing
    Call Park Recall 0 sec 1 min2 min3 min 4 min 5 min 6 min
    Page Recall 0 sec 1 min2 min3 min 4 min 5 min 6 min 7 min 8 min 9 min 10 min
    Camp-on Tone 5 sec 10 sec15 sec30 sec 1 min 2 min 3 min 4 min 8 min
    DTMF Extended Dialing80 ms160 ms 240 ms 320 ms 400 ms 560 min 720 ms 880 ms 1.04 sec
    Hold Recall 0 sec 30 sec 1 min 1.5 min 2 min 3 min 4 min 5 min 6 min
    Attendant Hold Recall 0 sec 30 sec 1 min 1.5 min2 min3 min 4 min 5 min 6 min
    Paging Access20 sec30 sec 1 min 1.5 min2 min2.5 min 3 min
    Pause 500 ms1 sec1.5 sec 2 sec 3 sec 5 sec 7.5 sec 10 sec 15 sec 20 sec
    Recall/Flash 110 ms 300 ms 500ms 600 ms 750ms 880 ms1 sec1.5 sec 2 sec 2.5 sec
    Station Transfer Recall 0 sec 10 sec20 sec25 sec 30 sec 45 sec 1 min 1.5 min 2 min 3 min 4 min
    Periodic Line Tone 1 min 2 min5 min10 min 15 min
    Maximum Call Duration Time 2 min 5 min10 min15 min 30 min
    Internal Interdigit Dialing 5 sec10 sec15 sec 20 sec 25 sec
    Max. Line-to-Line Conn. Duration 0 sec 1 min 5 min 9 min 13 min 17 min 21 min 25 min30 min
    Camp-on/Auto Callback Ring 0 sec 10 sec20 sec25 sec 30 sec 45 sec 1 min 1.5 min 2 min 3 min 4 min
    Out Dial Delay Time 500 ms1 sec1.5 sec 2 sec 2.5 sec 3 sec 3.5 sec 4 sec 4.5 sec 5 sec
    Authorization Code Time 0 sec 5 sec10 sec15 sec 20 sec 25 sec 30 sec
    IST Ring Timeout 1min 1.25 min 1.5 min 1.75 min 2 min 3 min 4 minNever
    IST DTMF Ring Timeout 5 sec 10 sec 15 sec20 sec25 sec 30 sec 35 sec 40 sec 45 sec
    IST Min. Flash Time 110 ms200 ms300 ms 400 ms
    IST Max. Flash Time 500 ms 600 ms750 ms880 ms 1 sec 1.5 sec
    Voice Mail DTMF Digit80 ms160 ms 240 ms 320 ms 400 ms 560 ms 720 ms 880 ms 1.04 sec
    Pulse Dial Interdigit 100 ms200 ms300 ms 400 ms 500 ms 600 ms 700 ms 800 ms 900 ms 1 sec
    Pulse Dial Make 0–90 ms40 ms
    Pulse Dial Break 0–99 ms40 ms
    Dialing Complete2 sec2.5 sec 3 sec 3.5 sec 4 sec 4.5 sec 5 sec 5.5 sec 6 sec 6.5 sec 7 sec 7.5 sec
    Periodic Conference Tone 2 sec 5 sec 10 sec 15 sec30 sec1 min 2 min 3 min 5 min
    Periodic Executive Override Tone2 sec5 sec 10 sec 15 sec 30 sec 1 min 2 min 3 min 5 min
    To make a programming record, check the block showing the desired setting.
    Default = value in bold italic type.
    IMI66–125DXP Plus Programming Records
    2–10  System Records 
    						
    							2.7 System Parameters
    Synchronized RingingNoYes
    Automatic Attendant Immediate TransferNoYes
    ARS (Automatic Route Selection)DisabledEnabled
    ARS Dial Tone1234
    System Status ReportingDisabledEnabled
    T1 Status ReportingDisabledEnabled
    Central Message DeskNoneName Number
    IST Ringing Per Phase816
    IST Ringing ModesMode 1 (2 sec.)Mode 2 (1 sec.)
    IST Ring Frequency21 Hz25 Hz
    Operator Station101Name Number
    Line Problem Limit (0 = disabled)
    (1–255 = choices)
    0
    Master CFOS Control DisabledEnabled
    Line Disconnect Auto Camp-on DisabledEnabled
    Automatic Station RelocationDisabledEnabled
    Default Relocation Response NoYes
    Ringback ToneTone 1Tone 2
    Day 1 Begin Time (24 Hour)NoneHour– Minute–
    Day 1 End Time (24 Hour)NoneHour– Minute–
    Day 2 Begin Time (24 Hour)NoneHour– Minute–
    Day 2 End Time (24 Hour)NoneHour– Minute–
    Night Begin Time (24 Hour)NoneHour– Minute–
    Night End Time (24 Hour)NoneHour– Minute–
    Location Code1 = USA4 = Argentia
    and Chile
    2 = South
    Africa
    5= Israel
    3 = Brazil
    To make a programming record, check the block showing the desired setting.
    Default = values shown in bold italic type.
    DXP Plus Programming RecordsIMI66–125
    System Records  2–11 
    						
    							2.8 Zone Paging
    Zone 1(Defaults to All-Call)*Record
    Zone Name
    Transmit Station (101-292)
    Relay Assigned (1-4)
    External Paging Port rt Assigned 0=No 1=yes
    Zone 2Record
    Zone Name
    Transmit Stations (101-292)
    Receive Stations (101-292)
    Relay Assigned (1-4)
    External Paging Port Assigned 0=No 1=yes
    Zone 3Record
    Zone Name
    Transmit Stations (101-292)
    Receive Stations (101-292)
    Relay Assigned (1-4)
    External Paging Port Assigned 0=No 1=yes
    Zone 4Record
    Zone Name
    Transmit Stations (101-292)
    Receive Stations (101-292)
    Relay Assigned (1-4)
    External Paging Port Assigned 0=No 1=yes
    Zone 5Record
    Zone Name
    Transmit Stations (101-292)
    Receive Stations (101-292)
    Relay Assigned (1-4)
    External Paging Port Assigned 0=No 1=yes
    Zone 6Record
    Zone Name
    Transmit Stations (101-292)
    Receive Stations (101-292)
    Relay Assigned (1-4)
    External Paging Port Assigned 0=No 1=yes
    Zone 7Record
    Zone Name
    Transmit Stations (101-292)
    Receive Stations (101-292)
    Relay Assigned (1-4)
    External Paging Port Assigned 0=No 1=yes
    Zone 8Record
    Zone Name
    Transmit Stations (101-292)
    Receive Stations (101-292)
    Relay Assigned (1-4)
    External Paging Port Assigned 0=No 1=yes
    *Default = zone 1is all-call, zones 2—8 not assigned.This means stations 101—292 are
    assigned to both transmit and receive in zone 1 and none are assigned in any other zone.
    Also, no external paging port is assigned.
    2.9 Relays
    Relay 1*Record
    Direct Ring LInes (1-128)
    Delayed Ring Lines (1-128)
    Day 1 Ring Lines (1-128)
    Day 2 Ring Lines (1-128)
    Night Ring Lines (1-128)
    Relay 2*Record
    Direct Ring LInes (1-128)
    Delayed Ring Lines (1-128)
    Day 1 Ring Lines (1-128)
    Day 2 Ring Lines (1-128)
    Night Ring Lines (1-128)
    Relay 3*Record
    Direct Ring LInes (1-128)
    Delayed Ring Lines (1-128)
    Day 1 Ring Lines (1-128)
    Day 2 Ring Lines (1-128)
    Night Ring Lines (1-128)
    Relay 4*Record
    Direct Ring LInes (1-128)
    Delayed Ring Lines (1-128)
    Day 1 Ring Lines (1-128)
    Day 2 Ring Lines (1-128)
    Night Ring Lines (1-128)
    * Default = no relays assigned
    2.10 External Paging Port
    Line Type*Record
    Direct Ring LInes (1-128)
    Delayed Ring Lines (1-128)
    Day 1 Ring Lines (1-128)
    Day 2 Ring Lines (1-128)
    Night Ring Lines (1-128)
    * Default = none assigned
    2.11 Change Password
    Entry
    (System Administrator)
    Installer
    (Installer/programmer)
    Station
    (Programming Station)
    * Entry and Installer Default= IS746S
    Station Default = ITCM button,S#746S
    (6 = password portion)
    IMI66–125DXP Plus Programming Records
    2–12  System Records 
    						
    							2.12 Feature Renumbering
    Feature Name Default Code New Code Feature Name Default Code New Code
    Park Orbits User Features
    Park Orbit Send 1S91 Background Music 1T11
    Park Orbit Send 2S92 Background Music 2T12
    Park Orbit Send 3S93 Background Music Off #1
    Park Orbit Send 4S94 Volume SaveTT7
    Park Orbit Send 5S95 Operator 0
    Park Orbit Send 6S96 Account Code EntryT04
    Park Orbit Send 7S97 Call Forward Cancel #5
    Park Orbit Send 8S98 Call Forward PersonalT51
    Park Orbit Send 9S99 Call Forward All CallsT52
    Park Orbit Receive 1 #91 Call Forward Personal  (RNA)T53
    Park Orbit Receive 2 #92 Call Forward All (RNA)T54
    Park Orbit Receive 3 #93 Camp-On ActivateT6
    Park Orbit Receive 4 #94 Camp-On Cancel #6
    Park Orbit Receive 5 #95 Call Pickup DirectedT4
    Park Orbit Receive 6 #96 Call Pick Up Group #4
    Park Orbit Receive 7 #97 Authorization Code Entry #08
    Park Orbit Receive 8 #98 DSS ProgrammingTT3
    Park Orbit Receive 9 #99 Executive OverrrideT03
    Line GroupsLCD Messaging ActivateT02
    Line Group 1 9 LCD Messaging Cancel #02
    Line Group 2 80 Message Wait ActivateT3
    Line Group 3 81 Message Wait Cancel #3
    Line Group 4 82 Call DivertT55
    Line Group 5 83 QueryTT8
    Line Group 6 84 Personal Ring Tone 1TT41
    Line Group 7 65 Personal Ring Tone 2TT42
    Line Group 8 86 Personal Ring Tone 3TT43
    Line Group 8 87 Personal Ring Tone 4TT44
    Line Group 10 88 Personal Ring Tone 5TT45
    Line Group 11 89 Personal Ring Tone 6TT46
    Line Group 12 60 Directed Station Hold OnT90
    Line Group 13 61 Service Observe #03
    Line Group 14 62 Speed Dial ProgrammingTT1
    Line Group 15 63 Directed Station Hold Off #90
    Line Group 16 64 Voice Announce Block OnT2
    Page and Line Answer from Any Station (TAFAS) ZonesVoice Announce Block Off #2
    Page Zone 1 70 LCD Contrast
    (Analog Telephone)TT5
    Page Zone 2 71 Response MessageTT6
    Page Zone 3 72 Pick Up Last Line*T08
    Page Zone 4 73 Broker’s Mode*T07
    Page Zone 5 74 Access Code For Speed Dial*T01
    Page Zone 6 75 Saved Number Redial*T06
    Page Zone 7 76 Dial Saved Number*T09
    Page Zone 8 77 Remote Station DisableT05
    Meet Me Page 78 Remote Station Enable #05
    TAFAS Zone 1 65 Message Wait Retrieval* #00
    TAFAS Zone 2 66 Tracker Page Pick Up #8
    TAFAS Zone 3 67 Tracker AccessT8
    TAFAS Zone 4 68 Pager Disable #06
    TAFAS All Zones 69 Pager Enable #07
    2.12.1 Station Programming
    Clear Major Alarm Ring #09
    Call Forward Off SiteT56
    DISA Access No Default Provided
    DND Code Access* #01
    Station Manager
    Programming Entry CodeV#74 Station Lock (On/Off toggle) #04
    Mark Problem Line No Default Provided
    attendant programming
    Programming Entry CodeV#0 TAP Dialing Code* # #
    *For Single-Line Proprietary and Industry-Standard Telephones
    DXP Plus Programming RecordsIMI66–125
    System Records  2–13 
    						
    							2.13 Enabling T1 Status Reporting And Major Alarm Alerting
    FeatureSettings* Default
    T1 Status ReportingEnabled Disabled Disabled
    Major Alarm AlertingEnabled Disabled Disabled
    *Mark block to match desired setting
    NOTE: The T1 status reporting and major alarm alerting parameters are described in the instructions, “Installing And Programming
    The DXPT1 Digital Carrier Transmission Option,” IMI89-193. These instructions should be located in this book under the
    installation tab.
    2.14 T1 Status Logging
    Error TypeThreshold Time Period+
    ^
    Range Selection Range Selection
    1. Bipolar Error Alarm Trigger0-255 None 1 Sec
    2. Bipolar Error Logging0-999 See Note A
    3. CRC Error Alarm Trigger0-255 None 1 Sec
    4. CRC Error Logging0-999 See Note A
    5. Slip Errors0-999 See Note B
    6. PLL Errors0-999 See Note A
    7. Transmit Slip Errors0-999 See Note B
    8. Loss of Sync0-999 See Note B
    9. Blue Alarms0-999 See Note B
    10. Loss of Signal0-999 See Note B
    11. Primary/Sec Sync Ref Switch0-999 See Note B
    12. Sync Phase Lock Error0-999 See Note B
    13. Yellow Alarms0-999 See Note B
    14. Red Alarms0-999 See Note B
    Defaults: Thresholds = 0; Time Periods = 1 Sec ( for Error Types 1-4 and 6 ) and 1 Min (for Error Types 5 and 7-14)
    NOTE A:Choices are 1, 5, 30 Sec; 1, 5, 10 Min; 1 Hr
    NOTE B:Choices are 1, 5, 10, 30 Min; 1, 2, 12, 24 Hr
    IMI66–125DXP Plus Programming Records
    2–14  System Records 
    						
    							2.15 Major Alarm Alerting
    Error TypeThreshold Time Period
    Range Selection Range Selection
    1. Bipolar Error 0-999 See Note A
    2. CRC Error 0-999 See Note A
    3. Slip Errors 0-999 See Note B
    4. PLL Errors 0-999 See Note A
    5. Transmit Slip Errors 0-999 See Note B
    6. Loss of Sync 0-999 See Note B
    7. Blue Alarms 0-999 See Note B
    8. Loss of Signal 0-999 See Note B
    9. Primary/Sec Sync Ref Switch 0-999 See Note B
    10. Sync Phase Lock Error 0-999 See Note B
    11. Yellow Alarms 0-999 See Note B
    12. Red Alarms 0-999 See Note B
    Defaults: Thresholds = 0; Time Periods = 1 Sec (for Error Types 1, 2, and 4) and 1 Min (for Error Types 3 and 5-12)
    NOTE A:Choices are 1, 5, 30 Sec; 1, 5, 10 Min; 1 Hr
    NOTE B:Choices are 1, 5, 10, 30 Min; 1, 2, 12, 24 Hr
    DXP Plus Programming RecordsIMI66–125
    System Records  2–15 
    						
    							Station Records
    ·From main menu, type selection number for station menu and pressENTER.
    ·From station menu, type selection number for feature and pressENTER.
    Stations
    1. COS Programming
    2. Station Programming
    3. Button Mapping
    4. Phone Types
    5. Copy Model COS
    6. Copy Model Station
    7. Copy Model Button Map
    8. Hunt Groups
    Enter Selection (1-7):
    3
    DXP Plus Programming Records IMI66–125
    Station Records 3–1 
    						
    							3.1 COS Programming
    (Copy This Sheet As Needed To Meet System COS Capacity)
    32 1 2–31Account Code YES NOYes No No
    Auto Hold on Intercom YES NONo No No
    Auto Hold on Lines YES NONo Yes No
    Background Music YES NOYes No No
    Call Cost Display YES NONo No No
    Call Forward All YES NOYes Yes No
    Call Forward Busy/RNA YES NOYes Yes No
    Call Forward Personal YES NOYes Yes No
    Call Forward Off Site (CFOS) YES NONo No No
    Call Park Access NONE, 1–91–9 1–9 None
    Call Pick-up YES NOYes Yes No
    Call Waiting YES NOYes Yes No
    Tracker Access YES NOYes Yes No
    Enhanced LCD Display YES NONo No No
    Intercom Studder Dial Tone YES NONo No No
    Camp-On Originate YES NOYes Yes No
    Camp-On Receive YES NOYes Yes No
    Do Not Disturb Inhibit YES NONo No No
    Do Not Disturb Override YES NONo No No
    Exclusive Hold YES NOYes Yes No
    Executive Override YES NONo No No
    Executive Override Block YES NONo No No
    Idle Line Preference YES NONo No No
    IST Distinctive Ringing YES NONo Yes No
    LCD Messaging YES NOYes No No
    Meet Me Page YES NOYes No No
    Message Deposit YES NOYes No No
    Message Wait Originate YES NOYes Yes No
    Music/Tone On Intercom Hold NONE 1, 2, Tone1 None None
    Paging Receive YES NOYes No No
    Paging Transmit YES NOYes Yes No
    Ringing Preference YES NOYes Yes No
    Day Route Access 1–4441
    Night Route Access 1–4441
    Day Restriction Level 1–8111
    Night Restriction Level 1–811 1
    System Speed Dial Groups NONE, 1–201-20 1-20 None
    Station Monitoring YES NONo Yes No
    Directed Station Hold YES NOYes Yes Yes
    Remote Station Disable YES NOYes Yes Yes
    Remote Day Exception Numbers NONE, 1–32None None None
    Remote Night Exception Numbers NONE, 1–32None None None
    Conference Advisory Tone ** None, Once, PeriodNone None None
    Executive Override Advisory Tone ** None, Once, PeriodNone None None
    Line Answer Line No.1-128 1–128 None
    Line Originate Line No.1-128 1–128 None
    Periodic Line Tone Line No.None None None
    Maximum Call Duration Line No.None None None
    Line Group Access NONE, 1–161–16 1–16 None
    Line Group Queue YES NOYes No No
    Line to Line Transfer YES NONo No No
    Voice Announce Block YES NOYes No No
    Internal IST Flash YES NONo Yes No
    Forced Account Codes YES NONo No No
    Allow Busy Display YES NONo No No
    Clear Major Alarm Ring YES NOYes Yes No
    High Handset Volume YES NONo No No
    Restrict ARS Hookflash YES NONo No No
    Quick Transfer YES NONo No No
    *Defaults: Stations 101 and 102 = COS 1, all other stations = COS 32, and COS 2-31 are unassigned.
    **Default = none when system parameters location code is 1, 2, , or 5; however default = periodic when system parameters location code is 3.
    Feature Choice COS Defaults* Class Of Service Records
    (Enter COS number at column head.)
    IMI66–125 DXP Plus Programming Records
    3–2  Station Records 
    						
    All Comdial manuals Comments (0)

    Related Manuals for Comdial Dxp Plus Instructions Manual