Home > Ricoh > Printer > Ricoh B230 Service Manual

Ricoh B230 Service Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Ricoh B230 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1286
    Add page 631 to Favourites
    image text
    Enable zoom 
    							 
SM 5-265 B230/B237 
Service 
Tables 
ƒ  After you do this SP, go out of the SP 
mode, and then turn the power off.   
ƒ  Do not remove the SD card until the 
Power LED stops flashing. 
Search Option 
060 This SP uses bit switches to set up the fuzzy search options for the UCS local 
address book. 
Bit: Meaning 
0: Checks both upper/lower case characters 
1: Japan Only 
2: Japan Only 
3: Japan Only 
4 to 7: Not Used   
Complexity Option 1 
062 Use this SP to set the conditions for password entry to access the local 
address book. Specifically, this SP limits the password entry to upper case 
and sets the length of the password. 
[0 to 32 / 0 / 1 /step] 
 
ƒ  This SP does not normally require adjustment. 
ƒ  This SP is enabled only after the system administrator has set up a 
group password policy to control access to the address book. 
063 
Complexity Option 2 DFU 
064 
Complexity Option 3 DFU 
065 
Complexity Option 4 DFU 
091  FTP Auth Port Setting Specifies the FTP port for getting a 
distribution server address book that is used 
in the identification mode. 
[0 to 65535 / 3671 / 1 /step] 
094 Encryption Stat Shows the status of the encryption function 
for the address book data.
    Add page 632 to Favourites
    image text
    Enable zoom 
    							 
B230/B237 5-266  SM 
 
[Rep Resolution Reduction] *CTL - 
5847 5847 1 through 5847 8 changes the default settings of image data transferred 
externally by the Net File page reference function. [ 0 to 5 / 2 / 1 /step] 
5847 21 sets the default for JPEG image quality of image files handled by 
NetFile. 
“Net files” are jobs to be printed from the document server using a PC and 
the DeskTopBinder software. 
001  Rate for Copy Color 
002  Rate for Copy B&W Text 
003  Rate for Copy B&W Other 
004  Rate for Printer Color 
005  Rate for Printer B&W 0: 1x 
1: 1/2x 
2: 1/3x 
3: 1/4x 
4: 1/6x 
5: 1/8x 
Network Quality Default for JPEG 
021 Sets the default value for the quality of JPEG images sent as NetFile pages. 
This function is available only with the MLB (Media Link Board) option 
installed. 
[5 to 95 / 50 / 1 /step] 
 
[Web Service] *CTL - 
5848 5848 2 sets the 4-bit switch assignment for the access control setting. Setting 
of 0001 has no effect on access and delivery from Scan Router.   
5848 100 sets the maximum size allowed for downloaded images. The 
default is equal to 1 gigabyte. 
001 ACC Ctrl: Netfile Protocol 
(Lower 4 bits only) Bit switch settings. 
 0000: No access control 
0001: Denies access to DeskTop Binder. Access and deliveries from Scan 
Router have no effect on capture.
    Add page 633 to Favourites
    image text
    Enable zoom 
    							 
SM 5-267 B230/B237 
Service 
Tables 
002 Access Ctrl: Repository (only 
Lower 4 bits) 0000: No access control 
0001: Denies access to DeskTop Binder. 
0010: No writing control 
003 Access Control: Doc. Svr. 
Print (Lower 4 bits) 
004 Access Control: User 
Directory (only Lower 4 bits) 
005 Access Cntl: For Cherry(only 
lower 4bits) 
007 Access Ctrl: Comm. Log Fax 
(Lower 4 bits) 
009 Access Ctrl: Job Ctrl (Lower 
4 bits) 
011 Access Ctrl: Device 
management (Lower 4 bits) 
021 Access Ctrl: Delivery (Lower 
4 bits) 
022 Access Ctrl: uAdministration 
(Lower 4bits) Switches access control on and off. 
0000: No access control 
0001: Denies access to DeskTop Binder. 
100 Repository: Download Image 
Max. Size Specifies the max size of the image data that 
the machine can download. 
[1 to 1024 / 1024 / 1 MB /step] 
210  Setting: LogType: Job1 
211  Setting: LogType: Job2 
212 Setting: LogType: Access 
213  Setting: Primary Srv 
214  Setting: Secondary Srv 
215 Setting: Start Time NIA
    Add page 634 to Favourites
    image text
    Enable zoom 
    							 
B230/B237 5-268  SM 
216 Setting: Interval Time 
217 Setting: Timing 
 
5849 [Installation Date] *CTL - 
5849 1  Display The “Counter Clear Day” has been changed 
to “Installation Date” or “Inst. Date”.   
5849 2  Switch to Print Determines whether the installation date is 
printed on the printout for the total counter. 
[0 or 1 / 1 / - ] 
0: No Print   
1: Print     
 
5850 [Address Book Function]  *CTL - 
Replacement of Circuit Classification Japan Only 
003 The machine is sold ready to use with a G3 line. This SP allows you to switch 
all at once to convert to G4 after you add a G4 line. Conversely, if for some 
reason the G4 line becomes unusable, you can easily switch back to G3. 
 
Bluetooth Mode 
5851 
Sets the operation mode for the Bluetooth Unit. Press either key. 
[0:Public] [1: Private] 
 
[Stamp Data Download] 
5853 Use this SP to download the fixed stamp data stored in the firmware of 
the ROM and copy it to the HDD. This SP can be executed as many 
times as required. This SP must be executed after replacing or 
formatting the hard disks. 
 
ƒ  This SP can be executed only with the hard disks installed.
    Add page 635 to Favourites
    image text
    Enable zoom 
    							 
SM 5-269 B230/B237 
Service 
Tables 
[Remote ROM Update] 
5856 
Allows the technician to upgrade the firmware using a local port (IEEE1284) 
when updating the remote ROM.   
002 Local Port  *CTL[0 to 1 / 0 / 1/step] 
0: Disable 
1: Enable 
 
5857 [Save Debug Log] *CTL - 
On/Off (1:ON 0:OFF) 
0: OFF, 1: ON 
5857 1 
Switches the debug log feature on and off. The debug log cannot be captured 
until this feature is switched on.   
Target (2: HDD 3: SD) 
2: HDD, 3: SD Card 
5857 2 Selects the storage device to save debug logs information when the 
conditions set with SP5-858 are satisfied. 
[ 2 to 3 / 2 / 1 /step] 
[Save to HDD] 
DFU 
005 Saves the debug log in memory to the HDD. 
A unique file name is generated to avoid overwriting existing file names on 
the SD Card. Up to 4MB can be copied to an SD Card.    4 MB segments can 
be copied one by one to each SD Card. 
006  Save to SD Card 
009  Copy HDD to SD Card (Latest 4 MB) 
010  Copy HDD to SD Card (Latest 4 MB Any Key) 
011  Erase HDD Debug Data 
012  Erase SD Card Debug Data 
013  Free Space on SD Card 
014  Copy SD to SD (Latest 4 MB)
    Add page 636 to Favourites
    image text
    Enable zoom 
    							 
B230/B237 5-270  SM 
015  Copy SD to SD (Latest 4 MB Any Key) 
016  Make HDD Debug 
017  Make SD Debug 
 
[Debug Save When] *CTL - 
5858 These SPs select the content of the debugging information to be saved to the 
destination selected by SP5857-002. 
SP5858-3 stores one SC specified by number. Refer to Section 4 for a list of 
SC error codes. 
001  Engine SC Error Turns on/off the debug save for SC codes 
generated by copier engine errors. 
[0 or 1 / 0 / 1/ step] 
0: OFF, 1: ON 
002  Controller SC Error Turns on/off the debug save for SC codes 
generated by GW controller errors. 
[0 or 1 / 0 / 1/ step] 
0: OFF, 1: ON 
003  Any SC Error 
[0 to 65535 / 0 / 1 /step] 
004 Jam Turns on/off the debug save for jam errors. 
[0 or 1 / 0 / 1/ step] 
0: OFF, 1: ON 
 
5859 [Debug Save Key No.] *CTL
- 
001 Key 1 
002 Key 2 
003 Key 3 
004 Key 4 
005 Key 5 These SPs allow you to set up to 10 keys for log 
files for functions that use common memory on the 
controller board. 
[–9999999 to 9999999 / 0 / – ]
    Add page 637 to Favourites
    image text
    Enable zoom 
    							 
SM 5-271 B230/B237 
Service 
Tables 
006 Key 6 
007 Key 7 
008 Key 8 
009 Key 9 
010 Key 10 
 
5860 [SMTP/POP3/IMAP4] *CTL 
- 
020 Partial Mail Receive Timeout 
[1 to 168 / 72 / – ] 
 Sets the amount of time to wait before saving a mail that breaks up during 
reception. The received mail is discarded if the remaining portion of the mail is 
not received during this prescribed time.   
021  MDN Response RFC2298 Compliance 
[0 to 1 / 1 / – ] 
 Determines whether RFC2298 compliance is switched on for MDN reply mail. 
0: No   
1: Yes   
022  SMTP Auth. From Field Replacement 
[0 to 1 / 0 / – ] 
 Determines whether the FROM item of the mail header is switched to the 
validated account after the SMTP server is validated. 
0: No. “From” item not switched. 
1: Yes. “From item switched. 
025 SMTP Auth. Direct Setting 
[0 or 1 / 0 / – ] 
 Selects the authentication method for SMPT. 
Bit switch: 
• Bit 0: LOGIN 
• Bit 1: PLAIN 
• Bit 2: CRAM MD5 
• Bit 3: DIGEST MD5 
• Bit 4 to 7: Not used
    Add page 638 to Favourites
    image text
    Enable zoom 
    							 
B230/B237 5-272  SM 
ƒ  This SP is activated only when SMTP authorization is enabled by UP 
mode. 
 
5866 [E-mail Alert] Not Used 
001 Report Validity  - Enables or disables the E-mail alert 
function. 
[0 or 1 / 0 / – ] 0: Enabled, 1: Disabled 
005  Add Date Field  *CTL Adds or does not add the date field to the 
header of the alert mail. 
[0 or 1 / 0 / – ]   
0: Not added, 1: Added 
 
5870 [Common Key Info Writing] 
001 Writing  *CTL Writes to flash ROM the common proof for 
validating the device for NRS 
specifications. 
 
5873 [SD Card Appli Move] 
001 Move Exec This SP copies the application programs from the 
original SD card in SD card slot 3 to an SD card in 
SD card slot 1 or 2 (slot 1 has the priority to be 
copied). 
002 Undo Exec This SP copies back the application programs from 
an SD card in SD Card Slot 3 to the original SD 
card in SD card slot 1 or 2 (slot 1 has the priority to 
be copied). Use this menu when you have 
mistakenly copied some programs by using Move 
Exec (SP5873-1). 
 
5875 [SC Auto Reboot]
    Add page 639 to Favourites
    image text
    Enable zoom 
    							 
SM 5-273 B230/B237 
Service 
Tables 
001 Reboot Setting  *CTL Enables or disables the automatic reboot 
function when an SC error occurs. 
[0 or 1/ 0 / – ] 
0: The machine reboots automatically 
when the machine issues an SC error and 
logs the SC error code. If the same SC 
occurs again, the machine does not 
reboot. 
1: The machine does not reboot when an 
SC error occurs. 
The reboot is not executed for Type A or C 
SC codes. 
002 Reboot Type  *CTL Selects the reboot method for SC. 
[0 or 1 / 0 / -] 
0: Manual reboot, 1: Automatic reboot 
 
5878 [Option Setup] 
001 Option Setup  - Enables the Data Overwrite Security unit. 
Press EXECUTE on the operation panel. 
Then turn the machine off and on. 
 
5881 [Fixed Phrase Block Erasing] 
001  -  -  Deletes the fixed phrase. 
 
[WIM Settings] Web Image Monitor Settings 
5885 
Close or disclose the functions of web image monitor. 
020 Document Server ACC 
Ctrl *CTL 0: OFF, 1: ON 
Bit Meaning 
0: Forbid all document server access (1) 
1: Forbid user mode access (1) 
2: Forbid print function (1)
    Add page 640 to Favourites
    image text
    Enable zoom 
    							 
B230/B237 5-274  SM 
3: Forbid fax TX (1) 
4: Forbid scan sending (1) 
5: Forbid downloading (1) 
6: Forbid delete (1) 
7: Reserved 
 
[Permit ROM Updating] DFU 
5886 
This SP determines whether the ROM can be updated. 
001 -  *CTL   [0 or 1 / 0 / 1/step] 
0: ON, 1: OFF 
 
[Plug & Play Maker/Model Name] Plug & Play Name Selection 
5907 Specifies the manufacturer and model name. These names are registered in 
the NVRAM. If the NVRAM becomes defective, these names should be 
re-registered. 
001 Plug/Play  *ENG[0 to 11 / 0 / 1 /step ] FA 
0: RICOH Aficio MP C3000 
1: RICOH Aficio MP C2500 
2: SAVIN C2525 
3: SAVIN C3030 
4: Gestetner MPC 2500/DSc525 
5: Gestetner MPC 3000/DSc530 
6: NRG MP C2500 
7: NRG MP C3000 
8: infotec ISC2525 
9: infotec ISC3030 
10: LANIER MP C2500/LD425c 
11: LANIER MP C3000/LD430c
    All Ricoh manuals Comments (0)

    Related Manuals for Ricoh B230 Service Manual