Home > Ricoh > Printer > Ricoh B230 Service Manual

Ricoh B230 Service Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Ricoh B230 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1286
    Add page 591 to Favourites
    image text
    Enable zoom 
    							 
SM 5-225 B230/B237 
Service 
Tables 
001  This program disables copying. 
 
5120 [Mode Clear Opt. 
Counter Removal] *CTL[0: Yes (removed)/ 1: Standby (installed 
but not used)/ 2: No (not removed)] 
001 This program updates the information on the optional counter. When you install 
or remove an optional counter, check the settings. 
 
5121 [Counter Up Timing] *CTL
[0: Feed/ 1: Exit] 
001 This program specifies when the counter goes up. The settings refer to “paper 
feed” and “paper exit” respectively. 
 
5126 [F Size Original Setting]*ENG[0 to 2 / 0 / 1 /step] 
0: 8 1/2 x 13 (Foolscap) 
1: 8 1/4 x 13 (Folio) 
2: 8 x 13 (F) 
001  Selects F size original setting. 
 
5127 [APS Mode] *CTL
[0: Not disabled/ 1: Disabled] 
001  This program disables the APS.   
 
5128 [Code Mode With Key/Card Option]*CTL - 
001 
DFU 
 
5131 [Paper Size Type 
Selection] *ENG [0: JP (Japan)/ 1: NA / 2: EU] 
001 The program selects a paper size system from the following alternatives: the 
AB system (0), the LT system (1), and the AF system (2).
    Add page 592 to Favourites
    image text
    Enable zoom 
    							 
B230/B237 5-226  SM 
5150 [By-Pass Length 
Setting] *CTL
[0: OFF/ 1: ON] 
001 Determines whether the transfer sheet from the by-pass tray is used or not. 
Normally the paper length for sub scanning paper from the by-pass tray is 
limited to 600 mm, but this can be extended with this SP to 1260 mm. 
 
5162 [App. Switch Method] *CTL
[0: Soft Key Set/ 1: Hard Key Set] 
001  This program specifies the switch that selects an application program. 
 
[Fax Printing Mode at Optional] 
5167 Enables or disables the automatic print out without an accounting device. This 
SP is used when the receiving fax is accounted by an external accounting 
device. 
001 Fax Printing Mode at 
Optional Counter Off *CTL [0 or 1 / 0 / - ] 
0: Automatic  printing 
1: No automatic printing 
 
[CE Login] 
5169 
If you will change the printer bit switches, you must ‘log in’ to service mode with 
this SP before you go into the printer SP mode. 
001 CE Login  *CTL [0 or 1 / 0 / - ] 
0: Disabled 
1: Enabled 
 
[Copy Data Security Setting] 
5178 
Do this SP after installation of the Copy Data Security Unit. 
001 
- *ENG[0 or 1 / 0 / 1/step] 
0: Copy data security function disabled 
1: Copy data security function enabled
    Add page 593 to Favourites
    image text
    Enable zoom 
    							 
SM 5-227 B230/B237 
Service 
Tables 
 
ƒ  The copy data security option will not operate correctly after 
installation until this SP is turned on. 
ƒ  This SP is not displayed until the machine is powered on with the Copy 
Data Security Setting board installed. 
 
[By-pass Size Error Detection] 
5179 
Turns on or off the by-pass tray size error message. 
001 -  *ENG[0 or 1 / 0 / 1/step] 
0: OFF 
1: ON (Paper size error message is 
displayed when the paper jam occurs due 
to the wrong direction of set paper in 
by-pass mode.)   
 
[Size Adjust] 
5181 
Adjusts the paper size for each tray. 
001 TRAY 1  *ENG[0 to 3 / 0 (NA/ASIA), 1 (EU) / 1 /step] 
0: A4 LEF, 1: LT LEF, 2: B5 LEF, 3: A5 LEF
002  TRAY 2: 1  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: A4 LEF, 1: LT LEF 
003  TRAY 2: 2  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: A3, 1: LT   
004  TRAY 2: 3  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: B4, 1: LG   
005  TRAY 2: 4  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: B5 LEF, 1: Exe LEF   
006  TRAY 3: 1 (LCT)  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: A4 LEF, 1: LT LEF
    Add page 594 to Favourites
    image text
    Enable zoom 
    							 
B230/B237 5-228  SM 
007  TRAY 3: 2 (LCT)  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: A3, 1: DLT   
008  TRAY 3: 3 (LCT)  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: B4, 1: LG   
009  TRAY 3: 4 (LCT)  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: B5 LEF, 1: Exe LEF   
010  TRAY 4: 1  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: A4 LEF, 1: LT LEF   
011  TRAY 4: 2  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: A3, 1: DLT   
012  TRAY 4: 3  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: B4, 1: LG   
013  TRAY 4: 4  *ENG[0 or 1 / 0 (NA/ASIA), 1 (EU) / - ] 
0: B5 LEF, 1: Exe LEF   
 
[RK 4] 
5186 Enables or disables the prevention for RK4 (accounting device) disconnection. 
If the RK4 is disconnected for 10 seconds when this SP is set to 1 (Enable), 
the machine automatically jams a sheet of paper and stops. 
001 -  *ENG[0 or 1 / 0 / 1/step] 
0: Disable 
1: Enable 
 
5212 [Page Numbering] *CTL  
 This program adjusts the position of the second side page numbers.   
A – value moves the page number positions to the left edge. A + value 
moves the page number positions to the right edge. 
003 Duplex Printout Right/Left 
Position [–10 to 10 / 0 / 1 mm/step]
    Add page 595 to Favourites
    image text
    Enable zoom 
    							 
SM 5-229 B230/B237 
Service 
Tables 
004 Duplex Printout High/Low 
Position [–10 to 10 / 0 / 1 mm/step] 
 
[Set Time] 
5302 Adjusts the RTC (real time clock) time setting for the local time zone. 
Examples: For Japan (+9 GMT), enter 540 (9 hours x 60 min.) 
DOM: +540 (Tokyo) 
NA: -300 (New York) 
EU: + 60 (Paris) 
CH: +480 (Peking) 
TW: +480 (Taipei) 
AS: +480 (Hong Kong) 
002 Time Difference  *CTL
# [-1440 to 1440 / Area / 1 min./step ] 
 
5307 [Summer Time] 
Setting  [ 0 to 1 / NA, EU, ASIA / 1 /step] 
0: Disabled 
1: Enabled 
NA and EUR: 1, ASIA: 0 
001 
Enables or disables the summer time mode. 
 
ƒ  Make sure that both SP5-307-3 and -4 are correctly set. Otherwise, 
this SP is not activated even if this SP is set to 1. 
Rule Set (Start)     
003 Specifies the start setting for the summer time mode. 
There are 8 digits in this SP. For months 1 to 9, the 0 cannot be input in the 
first digit, so the eight-digit setting for -2 or -3 becomes a seven-digit setting. 
1st and 2nd digits: The month. [1 to 12] 
3rd digit: The week of the month. [1 to 5] 
4th digit: The day of the week. [0 to 6 = Sunday to Saturday]
    Add page 596 to Favourites
    image text
    Enable zoom 
    							 
B230/B237 5-230  SM 
5th and 6th digits: The hour. [00 to 23] 
7th digit: The length of the advanced time. [0 to 9 / 1 hour    /step] 
8th digit: The length of the advanced time. [0 to 5 / 10 minutes /step] 
For example: 3500010 (EU default) 
The timer is advanced by 1 hour at am 0:00 on the 5th Sunday in March 
ƒ  The digits are counted from the left. 
ƒ  Make sure that SP5-307-1 is set to 1. 
Rule Set (End)  -  - 
004 Specifies the end setting for the summer time mode. 
There are 8 digits in this SP. 
1st and 2nd digits: The month. [1 to 12] 
3rd digit: The week of the month. [0 to 5] 
4th digit: The day of the week. [0 to 7 = Sunday to Saturday] 
5th and 6th digits: The hour. [00 to 23] 
The 7th and 8 digits must be set to 00. 
ƒ  The digits are counted from the left. 
ƒ  Make sure that SP5-307-1 is set to 1. 
 
[Access Control] 
5401 
When installing the SDK application, SAS (VAS) adjusts the following 
settings. DFU 
200  SDK1 Unique ID  *CTLThis ID is overwritten by SAS (VAS) when 
you install or uninstall the SDK application. 
201 SDK1 Certification 
Method *CTL
[0 to 255 / 0 / 1 /step] 
210  SDK2 Unique ID  *CTL - 
211 SDK2 Certification 
Method *CTL
[0 to 255 / 0 / 1 /step] 
220  SDK3 Unique ID  *CTL - 
221 SDK3 Certification  *CTL
[0 to 255 / 0 / 1 /step]
    Add page 597 to Favourites
    image text
    Enable zoom 
    							 
SM 5-231 B230/B237 
Service 
Tables 
Method 
 
5404 [User Code Counter Clear] 
001  UCodeCtrClr    Clears all counters for users. 
 
5501 [PM Alarm] *CTL - 
001 PM Alarm Level [0 to 9999 / 0 / 1 /step] 
0: Alarm  off 
1 to 9999: Alarm goes off when Value (1 to 9999) 
x 1000 ≥ PM counter 
002 Original Count Alarm [0 or 1 / 1 / – ] 
0: No alarm sounds 
1: Alarm sounds after the number of originals 
passing through the ARDF ≥ 10,000 
 
5504 [Jam Alarm] *CTL - 
001 Sets the alarm to sound for the specified jam level (document misfeeds are 
not included).   
[0 to 3 / 3 / 1 /step] 
0: Zero (Off) 
1: Low (2.5K jams) 
2: Medium (3K jams) 
3: High (6K jams) 
 
[Error Alarm] 
5505 Sets the error alarm level.   
The error alarm counter counts 1 when any SC is detected. However, the 
error alarm counter decreases by 1 when an SC is not detected during a set 
number of copied sheets (for example, default 1500 sheets).   
The error alarm occurs when the SC error alarm counter reaches 5.
    Add page 598 to Favourites
    image text
    Enable zoom 
    							 
B230/B237 5-232  SM 
001 -  *CTL[0 to 255 / 50/75 (C1a/C1b) / 100 copies 
/step]  
 
5507 [Supply Alarm] *CTL - 
001 Paper Supply Alarm 
0: Off, 1: On, DFU  
002 Staple Supply Alarm 
0: Off, 1: On, Japan only 
003 Toner Supply Alarm 
0: Off, 1: On, DFU 
128 Interval :Others 
132 Interval :A3 
133 Interval :A4 
134 Interval :A5 
141 Interval :B4 
142 Interval :B5 
160 Interval :DLT 
164 Interval :LG 
166 Interval :LT 
172 Interval :HLT [250 to 10000 / 1000 / 1 /step] DFU 
 
5508* [CC Call] *CTL - 
Jam Remains 
0: Disable, 1: Enable 
001* 
Enables/disables initiating a call for an unattended paper jam. 
Continuous Jams 
0: Disable, 1: Enable 
002* 
Enables/disables initiating a call for consecutive paper jams. 
003*  Continuous Door Open 
0: Disable, 1: Enable
    Add page 599 to Favourites
    image text
    Enable zoom 
    							 
SM 5-233 B230/B237 
Service 
Tables 
Enables/disables initiating a call when the front door remains open. 
Jam Detection: Time Length 
[3 to 30 / 10 / 1 minute /step] 
011* 
Sets the time a jam must remain before it becomes an “unattended paper 
jam”. This setting is enabled only when SP5508-004 is set to 1. 
Jam Detection: Continuous 
Count [2 to 10 / 5 / 1 /step] 
012* 
Sets the number of consecutive paper jams required to initiate a call. This 
setting is enabled only when SP5508-004 is set to 1. 
Door Open: Time Length 
[3 to 30 / 10 / 1 /step] 
013* Sets the length of time the door remains open before the machine initiates a 
call. 
This setting is enabled only when SP5-508-004 is set to 1. 
Jam Operation: Time Length 0: Automatic  Call 
1: Audible Warning at Machine 
021* 
Determines what happens when a paper jam is left unattended. 
Jam Operation: Continuous 
Count 0: Automatic  Call 
1: Audible Warning at Machine 
022* 
Determines what happens when consecutive paper jams occur. 
Door Operation: Time Length 
0: OFF, 1: ON 
023* Determines what happens if the door remains open (15 min.). 
Displays a warning if set to ON. Pressing the call button will contact the 
service center. This setting is available for setting only if SP5508-004 is set to 
1. 
 
[SC/Alarm Setting]  *CTL - 
5515 With NRS (New Remote Service) in use, these SP codes can be set to issue 
an SC call when an SC error occurs. If this SP is switched off, the SC call is 
not issued when an SC error occurs.
    Add page 600 to Favourites
    image text
    Enable zoom 
    							 
B230/B237 5-234  SM 
001 SC Call 
002 Service Parts Near End 
Call 
003  Service Parts End Call 
004 User Call [0 or 1 / 1 / - ] 
0: Off 
1: On 
006 Communication Test Call
007 Machine Information 
Notice 
008 Alarm Notice 
009 Non Genuine Toner 
Alarm 
010 Supply Automatic 
Ordering Call 
011 Supply Management 
Report Call 
012  Jam/Door Open Call [0 or 1 / 1 / - ] 
0: Off 
1: On 
 
5516 [Individual PM Part 
Alarm Call] *CTL - 
001  Disable/ Enable Setting Enables or disables the PM part alarm call. 
[0 or 1 / 1 / - ]   
0: Not Send, 1: Send 
002 Alarm Flag  Displays the condition of the PM part alarm call. 
[0 or 1 / 1 / - ] 
0: Ready (to send), 1: Already Send   
003  Alarm Flag Clear Clears the alarm flag (SP5-516-002). 
Do this SP after servicing for PM parts. So, 
SP5-516-002 is set to 0.
    All Ricoh manuals Comments (0)

    Related Manuals for Ricoh B230 Service Manual