Home > NEC > Communications System > NEC Neax 2400 Ipx System Operations And Maintenance Manual

NEC Neax 2400 Ipx System Operations And Maintenance Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx System Operations And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 724
    Add page 721 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 693
Issue 1
SPTS: Scanning of Port Status
Note 1:
The parameter is only for KIND = 1.
Note 2:The parameter is only for KIND= 2.
DATA MEANING DATA MEANING
901 Attendant Console 902 Originating Register Trunk
903 Incoming Register Trunk 904 MF Receiver
905 Sender Trunk DP/PB 906 PB Receiver for Automated Attendant Service
907AMP 908Not used
909 Three-Way Conference Trunk 910-912 Not used
913 Three-Way Conference Trunk for ATTCON 914 Not used
915 Night Attendant 916 MFC Register
917 MFC Sender 918 Not used
919-926 Modem 927, 928 Not used
929 MFC Sender 930 Rate Adapter Conversion Trunk
931 Not used 932-947 Not used
    Add page 722 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 694
Issue 1
SRTS: Scanning of Route Status
SRTS:Scanning of Route Status
1. Functional Outline
This command displays the designated trunk status (Busy/Idle) at predetermined intervals. A maximum of 15
routes can be scanned.
2. Parameters
Input data
RT: R o u t e  N u m b e r
Interval Time
Display data
Number of Idle TK
Number of Busy
    Add page 723 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 695
Issue 1
XHFD: X-RAY HD or FDD Diagnosis
XHFD:X-RAY HD or FDD Diagnosis
1. Functional Outline
This command is used to execute the following diagnoses.
Hard Disk Diagnosis
By executing read/write check on the files in the hard disk of the PBX, this command diagnoses the hard
disk for its normality.
If an error has been found as a result of the diagnosis, this command displays the information on the faulty
logical drive and the number of faulty sectors on the MAT screen. The information can also be output by
the printer.
Floppy Disk Diagnosis
By executing cleaning of the floppy disk drive in the PBX, this command diagnoses the floppy disk drive
for its normality.
If the cleaning has not finished normally, a diagnosis error has been found as a result of the diagnosis. The
result message may be displayed on the MAT screen or printed out by the printer.
2. Parameters
Input data
FUNCTION: HD/FDD Designation [1/2]
1=Diagnosis of HD (Hard Disk)
2=Diagnosis of FDD (Floppy Disk Drive)
AREA: Area Designation [0/l] 
Note
0=All Files
1=Program Files
SYSTEM: System (0/1)
0=No.0 System
1=No.1 System
Note:“AREA” parameter appears only when “1(=HD)” is selected in the “FUNCTION” parameter.
Buttons
Exe: Click to execute the diagnosis.
Close: Click to exist this command.
    Add page 724 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 696
Issue 1
XHFD: X-RAY HD or FDD Diagnosis
Display data
FAULT DRIVE: Fault Drive Number [0-4]
0=-
1=#0
2=#1
3=#2
4=#3
FAULT SECTOR: Number of Fault Sector [0-65535]
MESSAGE: Result of diagnosis [0-255]
0=Normal End
1=Hard disk read test practice error
2=Floppy disk drive cleaning practice error
3=Common part parameter error (Data length error)
4=FDD cleaning abnormal end (FD not in drive)
5=Individual part parameter error (Function error)
6=Individual part parameter error (Sub function error)
7=Individual part parameter error (Device error)
8=Individual part parameter error (Drive selection error)
9=Individual part parameter error (Data ID error)
10=Individual part parameter error (Processor ID error)
11=Individual part parameter error (File ID error)
12=Individual part parameter error (File name error)
13=Request order error (Health check send error)
14=Request order error (Data send signal error)
15=Internal error (File open error)
16=Internal error (File read error)
17=Internal error (File close error)
18=Internal error (FAT error)
19=Internal error (SCSIC error)
20=Internal error (other)
21=Hard interface abnormal end
22-255=-
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx System Operations And Maintenance Manual