Home > NEC > Communications System > NEC Neax 2400 Ipx System Operations And Maintenance Manual

NEC Neax 2400 Ipx System Operations And Maintenance Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx System Operations And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 724
    Add page 181 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 3
Page 153
Issue 1
SYSTEM MESSAGES
[20H] Data Memory Verification Normal End
➀ Performed Diagnosis Item
➁ Verification of HD
➂ Verification of Data Memory
1: 20XX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁ ➂
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b1 b0
b2 b1 b0
[20H] Data Memory Verification Normal End
b0: 0/1 = -/HFD 0 is normal
b1: 0/1 = -/HFD 1 is normal
b0: 0/1 = -/Data Memory
b1: 0/1 = -/Local Data Memory
b2: 0/1 = -/Network Data Memory
    Add page 182 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 NDA-24307
Page 154
Issue 1
SYSTEM MESSAGES
[30H] TSW ACT/STBY Changeover Normal End
➀ Performed Diagnosis Item
➁ Active TSW system after the 
changeover
1: 30XX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b0
[30H] TSW ACT/STBY Changeover Normal End
b0: 0/1 = TSW No. 0 is ACT/TSW No. 1 is ACT
    Add page 183 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 3
Page 155
Issue 1
SYSTEM MESSAGES
[40H] CPU ACT/STBY Changeover Normal End
➀ Performed Diagnosis Item
➁ Active status information after 
changeover
1: 40XX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b1 b0
[40H] CPU ACT/STBY Changeover Normal End
b0: CPU
0/1 = No. 0 is ACT/No. 1 is ACT
b1: TSW
0/1 = No. 0 is ACT/No. 1 is ACT
    Add page 184 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 NDA-24307
Page 156
Issue 1
SYSTEM MESSAGES
[50H] No Trunk Ineffective Hold
➀ Performed Diagnosis Item
➁ MG and Unit of No. 
1: 50XX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
[50H] No Trunk Ineffective Hold
b0: Unit 0, Even-numbered MG 
1 = No Trunk Ineffective Hold
b1: Unit 1, Even-numbered MG 
1 = No Trunk Ineffective Hold
b2: Unit 2, Even-numbered MG 
1 = No Trunk Ineffective Hold
b3: Unit 3, Even-numbered MG 
1 = No Trunk Ineffective Hold
b4: Unit 0, Odd-numbered MG 
1 = No Trunk Ineffective Hold
b5: Unit 1, Odd-numbered MG 
1 = No Trunk Ineffective Hold
b6: Unit 2, Odd-numbered MG 
1 = No Trunk Ineffective Hold
b7: Unit 3, Odd-numbered MG 
1 = No Trunk Ineffective Hold
    Add page 185 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 3
Page 157
Issue 1
SYSTEM MESSAGES
[70H] Call Forwarding Memory Clear Normal End
➀ Performed Diagnosis Item
1: 7000 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ 
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
[70H] Call Forwarding Memory Clear Normal End
    Add page 186 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 NDA-24307
Page 158
Issue 1
SYSTEM MESSAGES
[A0H] Periodic Back-up Normal
➀ Performed Diagnosis Item
➁ Information on Periodic Backup 
Normal End
➂ Backup Data to No. 0 system
➃Backup Data to No. 1 system
Note:The Number Sharing data load also affects the data load of Dual Station Calling Over-FCCS.
1: A0XX XX00 0000 XX00 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁ ➂ ➃
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b1 b0
b6 b5 b4 b3 b2 b1 b0
b6 b5 b4 b3 b2 b1 b0
[A0H] Periodic Back-up Normal
b0: 0/1 = HFD 0 Normal end/Abnormal end
b1: 0/1 = HFD 1 Normal end/Abnormal end
b0: 0/1 = -/Individual Speed Calling Data
b1: 0/1 = -/Call Forwarding Data
b2: 0/1 = -/RCF
b3: 0/1 = -/Name Display Data
b4: 0/1 = -/User Assign Soft Key Data
b5: 0/1 = -/Number Sharing Data Note
b6: 0/1 = -/Call Block Data 
b0: 0/1 = -/Individual Speed Calling Data
b1: 0/1 = -/Call Forwarding Data
b2: 0/1 = -/RCF
b3: 0/1 = -/Name Display Data
b4: 0/1 = -/User Assign Soft Key Data
b5: 0/1 = -/Number Sharing Data Note
b6: 0/1 = -/Call Block Data
    Add page 187 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 3
Page 159
Issue 1
SYSTEM MESSAGES
[C0H] Detection of Remaining Link Normal End 
➀ Performed Diagnosis Item
1: C000 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ 
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
[C0H] Detection of Remaining Link Normal End
    Add page 188 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 NDA-24307
Page 160
Issue 1
SYSTEM MESSAGES
In a specific time cycle, the system allows a routine diagnosis in its hardware and software to determine if they
are operating properly. This message indicates that the system has been checked by the routine diagnosis
program and the result of the diagnosis is not normal.
➀ Detected Error Item
Note 1:This data is output at the ISW.
Note 2:This data is collected and output at the ISW.
Note 3:The data in this area will be diverse, according to the diagnosis specified in ➀. For details on each
item data, see the following pages.
1: XXXX XXXX XXXX XXXX 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
Note 3
➀ 
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
Default Alarm:
NON7-PCyclic Diagnosis Information (Error Detected)Default Grade:
3Grade Modified: Lamp Modified:
[10H] Program Memory Verification Discrepancy
[11H] Program Memory Verification Impossible (HFD Fault)
[12H] Program Memory Verification Impossible (Fault at CPU side)
[20H] Data Memory Verification Discrepancy
[21H] Data Memory Verification Impossible (HFD Fault)
[31H] TSW ACT/STBY Changeover Failure (ISW)
[32H] TSW ACT/STBY Changeover Failure (LN)
[41H] CPU ACT/STBY Changeover Failure
[42H] CPU ACT/STBY Changeover Failure (DM or PM Verification 
NG)
[43H] CPU ACT/STBY Changeover Failure (PCI Fault)
[44H] CPU ACT/STBY Changeover Failure (Changeover NG or CPU 
RAM Copy NG)
[50H] Trunk Ineffective Hold Detected
[51H] Trunk Ineffective Hold Detected and Released
[52H] Trunk Ineffective Hold Detected Impossible
[70H] Call Forwarding Memory Clear NG
[A0H] Periodic Backup Abnormal End
[C0H] Detection of Remaining Link Abnormal End
    Add page 189 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 3
Page 161
Issue 1
SYSTEM MESSAGES
[10H] Program Memory Verification Discrepancy 
➀ Detected Error Item
➁ Faulty HFD number
➂ Verification of Drive Number
➃ Data analyzed by NEC Engineers
1: 1000 XXXX XXXX XXXX 2: XXXX 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁ ➂ ➃
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b1 b0
b3 b2 b1 b0
[10H] Program Memory Verification Discrepancy
b0: 0/1 = -/HFD 0
b1: 0/1 = -/HFD 1
b0: 0/1 = -/Drive Number 0
b1: 0/1 = -/Drive Number 1
b2: 0/1 = -/Drive Number 2
b3: 0/1 = -/Drive Number 3
    Add page 190 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 NDA-24307
Page 162
Issue 1
SYSTEM MESSAGES
[11H] Program Memory Verification Impossible (HFD Fault)
➀ Detected Error Item
➁ HFD No. (verification suspended)
➂ Error Type
➃ Data analyzed by NEC Engineers
➄ Error Drive Note
Note:
This data is available when ➂ is 00 Hex.
1: 11XX XXXX XXXX 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁ ➂ 
➃➄
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b3 b2 b1 b0
[11H] Program Memory Verification Impossible (HFD Fault)
b0: 0/1 = -/HFD 0
b1: 0/1 = -/HFD 1
00H: HD Processing NG
01H: HD Not Connected
02H: HD Busy
03H: HD Fault (Fault processing/No equipment, etc.)
04H: Transfer NG
05H: Response Timeout
b0: 0/1 = -/Drive Number 0
b1: 0/1 = -/Drive Number 1
b2: 0/1 = -/Drive Number 2
b3: 0/1 = -/Drive Number 3
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx System Operations And Maintenance Manual