NEC Neax 2400 Ipx System Operations And Maintenance Manual
Have a look at the manual NEC Neax 2400 Ipx System Operations And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NDA-24307 CHAPTER 8 Page 663 Issue 1 DTF601N: Display of Connection Route Peg Count Data for Fusion Network DTF601N:Display of Connection Route Peg Count Data for Fusion Network 1. Functional Outline This command displays the result of traffic measurement data for Type=18 (Connection Route Peg Count) assigned by the ATRFN command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101N Route Traffic-DTF102N Station Peg Count-DTF103N Attendant Peg Count-DTF104N Route Peg Count-DTF105N Traffic Data 2: Service Peg Count-DTF201N Traffic Data 3: UCD Route Peg Count-DTF301N UCD Group Peg Count-DTF302N UCD Station Peg Count-DTF303N Traffic Data 5: Attendant Answering Peg Count-DTF501N Traffic Data 6: Connection Route Peg Count-DTF601N Connection Route Traffic-DTF602N
CHAPTER 8 NDA-24307 Page 664 Issue 1 DTF602N: Display of Connection Route Traffic Data for Fusion Network DTF602N:Display of Connection Route Traffic Data for Fusion Network 1. Functional Outline This command displays the result of traffic measurement data for Type=19 (Connection Route Traffic) assigned by the ATRFN command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101N Route Traffic-DTF102N Station Peg Count-DTF103N Attendant Peg Count-DTF104N Route Peg Count-DTF105N Traffic Data 2: Service Peg Count-DTF201N Traffic Data 3: UCD Route Peg Count-DTF301N UCD Group Peg Count-DTF302N UCD Station Peg Count-DTF303N Traffic Data 5: Attendant Answering Peg Count-DTF501N Traffic Data 6: Connection Route Peg Count-DTF601N Connection Route Traffic-DTF602N
NDA-24307 CHAPTER 8 Page 665 Issue 1 FLINST: File Install FLINST:File Install 1. Functional Outline This command is used to install the DPSW-dedicated database files to your MAT. This command is necessary to provide each circuit card’s various information (such as circuit card name, equipped switch names, etc.) when your system uses the DPSW/DPKG command. 2. Parameters Input data None Buttons Copy: Click to start the data file install. Exit: Click to exit this command. (1) Start up the FLINST command from the Start menu. (2) Initial Display of the FLINST command appears. Make sure the proper FD drive name is selected in the “FDD” parameter. (3) Click the “Copy” button. Then, a message, requiring to insert the first FD into the FDD drive, appears. (4) Insert the first FD into the FDD of the MAT. Then, click OK. (5) File copy starts automatically, and the “Copy End” message appears upon completion. (6) Click OK. Then, another message asks you whether the next FD is to be installed or not. (7) Click OK. (8) A message, requiring to insert the second FD into the FDD drive, appears. Insert the second FD into the FDD, and click OK. (9) File copy starts automatically, and the “Copy End” message appears upon completion. (10) Click OK. Then, a message asks you whether the next (fourth) FD is to be installed or not. (11) Click Cancel.
CHAPTER 8 NDA-24307 Page 666 Issue 1 HDD_FDD: Data Control Between HDD and FDD HDD_FDD:Data Control Between HDD and FDD 1. Functional Outline This command is used to install the program data from FDD of PBX to HDD of PBX, and to verify the program data between FDD of PBX and HDD of PBX. 2. Parameters Input data System Select: HFD 0/HFD 1 Direction Select: Floppy Disk to Hard Disk/Verify HDD against FDD/Hard Disk to Floppy Disk Data Type Selection: Data Memory Note 1 Name Display Wireless Call Forwarding Program data Note 2 Call Forwarding Speed Calling User Assign Soft Key Number Sharing Note 3 Call Block ACD Data Memory LP Select: This data appears when Call Forwarding, Speed Calling, User Assign Soft Key, Number Sharing, or Call Block data is designated. File Name Select Auto Verify Afterward Note 1:When “Data Memory” is selected, Local Data Memory (LDM) and Network Data Memory (NDM) are also saved/verifed simultaneously. Note 2:“Program data” can be valid when you select “Floppy Disk to Hard Disk” or Verify HDD against FDD” in the “Direction Select” list box. Note 3:By saving the Number Sharing data, the data concering “Dual Station Calling Over-FCCS” is also saved/verifed automatically.
NDA-24307 CHAPTER 8 Page 667 Issue 1 HDD_MAT: Data Control Between HDD and MAT HDD_MAT:Data Control Between HDD and MAT 1. Functional Outline This command is used to save the following data from HDD of PBX to MAT. 2. Parameters Input data Direction Select: PBX Hard Disk to MAT/MAT to PBX Hard Disk/Verify HDD against MAT Data Type Selection: Data Memory Note 1 Name display Wireless Call Forwarding Program data Note 2 Call Forwarding Speed Calling User Assign Soft Key Number Sharing Note 3 Call Block ACD Data Memory LP Select: This data appears only when Call Forwarding, Speed Calling, User Assign Soft Key, Number Sharing, or Call Block data is designated. Auto Verify Afterward Note 1:When “Data Memory” is selected, Local Data Memory (LDM) and Network Data Memory (NDM) are also saved/verifed simultaneously. Note 2:“Program data” can be valid when you select “MAT to PBX Hard Disk” in the “Direction Select” list box. Note 3:By saving the Number Sharing data, the data concering “Dual Station Calling Over-FCCS” is also saved/verifed automatically.
CHAPTER 8 NDA-24307 Page 668 Issue 1 HDD_MAT_N: Data Control Between HDD and MAT for NDM HDD_MAT_N:Data Control Between HDD and MAT for NDM 1. Functional Outline This command, available at the NCN only, installs (overwrites) the updated Program data from the centralized MAT onto the HDD of all local nodes. To use this command, first install the updated program data on the HDD of the MAT and then execute the program installing onto the HDD of each LN. 2. Parameters Input data Data Type Selection: Select all the listed program data Execution Button: Installing of program data is to be executed
NDA-24307 CHAPTER 8 Page 669 Issue 1 HDFP: HDD Format of PBX HDFP:HDD Format of PBX 1. Functional Outline This command is used to execute the formatting of the HDD of PBX. 2. Parameters Input data (Selection by check) 0 System: HDD of No.0 System 1 System: HDD of No.1 System Buttons Execute: Click to execute the formatting. Close: Click to exit this command.
CHAPTER 8 NDA-24307 Page 670 Issue 1 MBCT: Make Busy of Connection Trunk for LDM MBCT:Make Busy of Connection Trunk for LDM 1. Functional Outline This command is used to set/reset the make busy state of the connection trunk. 2. Parameters Input data C_RT: Connection Route Number [1-1023] C_TK: Trunk Number [1-4095] MB: Make Busy Information [0/1] 0=Make Idle 1=Make Busy (Outgoing)
NDA-24307 CHAPTER 8 Page 671 Issue 1 MBLE: Make Busy of LENS MBLE:Make Busy of LENS 1. Functional Outline This command assigns the Idle/Busy status of Line Equipment Numbers (LENS). 2. Parameters Input data LENS MB: 0/1=Make Idle/Make Busy
CHAPTER 8 NDA-24307 Page 672 Issue 1 MBPM: Make Busy of Port Microprocessor MBPM:Make Busy of Port Microprocessor 1. Functional Outline This command sets or resets the make-busy state of the circuit card that contains the port microprocessor. This setting and resetting is performed individually for each circuit card. If the location of the circuit card containing the port microprocessor is specified in this command, the operating state of all circuit cards mounted in the associated unit is displayed. 2. Parameters Input data MG Unit Group MB Display data MB: (0-1) 0=Make Idle 1=Make Busy Note:The Idle/Busy status can be displayed and assigned by the MB parameter.