Home > NEC > Communications System > NEC Neax 2400 Ipx System Operations And Maintenance Manual

NEC Neax 2400 Ipx System Operations And Maintenance Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx System Operations And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 724
    Add page 661 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 633
Issue 1
DLSS_T: Display of Lock Out Station - Number- Telephone Number
DLSS_T:Display of Lock Out Station - Number- Telephone Number
1. Functional Outline
This command is used to print out stations in lockout state, by using Telephone Numbers. This command is
available at NCN (for Fusion network) only. 
Note
Note:
This command is available for PBX program software.
2. Parameters
Input data
Type: Printout of all lockout stations
Printout of lockout stations by tenant
Printout of lockout stations within a specified range of station number
UGN: User Group Number 
Note 1, Note 2
Start TELN: First Telephone Number (max. 16 digits) Note 2
End TELN: End Telephone Number (max. 16 digits) Note 2
Note 1:
This parameter is valid when “Type = Printout of lockout stations by tenant” is selected.
Note 2:This parameter is valid when “Type = Printout of lockout stations within a specified range of station
number” is selected.
Display data
FPC: Fusion Point Code (1-253)
TN: Tenant Number
Start STN: First Physical Station Number (max. 5 digits for Business/max. 6 digits for Hotel
system)
End STN: End Physical Station Number (max. 5 digits for Business/max. 6 digits for Hotel
system)
CNT: Count
UGN: User Group Number
TELN: Telephone Number (max. 16 digits)
LENS: Line Equipment Number
Buttons
Get: Click to get information on the lockout station
Exit: Click to exit this command.
    Add page 662 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 634
Issue 1
DLTEL: Display of Telephone Number from LENS for LDM
DLTEL:Display of Telephone Number from LENS for LDM
1. Functional Outline
This command, available at each Local Node (LN), is used to display the Telephone Number or other station
data by designating a specific LEN.
2. Parameters
Input data
LENS: Line Equipment Number [6 digits]
Display data
UGN: User Group Number
TELN: Telephone Number [Max. 16 digits]
TN: Tenant Number
STN: Station Number [Max. 6 digits]
TEC: Telephone Equipment Class [1-31]
RSC: Route Restriction Class [0-15]
SFC: Service Feature Class [0-15]
    Add page 663 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 635
Issue 1
DNTEL: Display of Telephone Number from LENS for NDM
DNTEL:Display of Telephone Number from LENS for NDM
1. Functional Outline
This command, available at Network Control Node (NCN) only, is used to display the Telephone Number or
other station data by designating a specific FPC and LEN.
2. Parameters
Input data
FPC: Fusion Point Code [1-253]
LENS: Line Equipment Number [6 digits]
Display data
UGN: User Group Number
TELN: Telephone Number [Max. 16 digits]
NID: Network ID 
Note
TN: Tenant Number
STN: Station Number [Max. 6 digits]
TEC: Telephone Equipment Number [1-31]
RSC: Route Restriction Class [0-15]
SFC: Service Feature Class [0-15]
Note:Network ID (NID) is allocated automatically when the Module Group/Unit data is assigned by the
AFMU command. Refer to the “Fusion Network System Manual” for more information.
    Add page 664 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 636
Issue 1
DPKG: Display of Setting Port Package
DPKG:Display of Setting Port Package
1. Functional Outline
This command is used to display the circuit card name accommodated in each Group of a specific UNIT.
Note 1:When using this command, make sure that each circuit card related database files have already been
installed to your MAT. (See FLINST command for more information.)
2. Parameters
Input data
MG: Module Group (MG) number [00-07]
UNIT: Unit (U) number [0-3]
Buttons
Get: Click to get information on mounted circuit cards.
Close: Click to exit this command.
Note:When the Input Data above is entered and the “Get” button is pressed, the related circuit card name is
displayed on a Group basis. However, if the name is not found for some reasons, the following mark
may appear in the relevant display field.
#→Unidentifiable firm ware type.
##→Data not found in the FMID (database).
###→Group data not assigned.
*→Circuit card name not found (for the card is in make-busy state, etc.).
    Add page 665 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 637
Issue 1
DPSW: Display Package Switch Status
DPSW:Display Package Switch Status
1. Functional Outline
This command is used to display the following information on a Line/Trunk or Control circuit card:
[When MAT is in On-Line Mode (=connected to the system)]
Current status of each switch
Explanation of each switch function
[When MAT is in Off-Line Mode (= not connected to the system)]
Explanation of each switch function
Note 1:When using this command, make sure that each circuit card related database files have already been
installed to your MAT. (See FLINST command for more information.)
2. Parameters
Input data
KIND: Display Kind (selection)
(MAT=) On-Line Mode
(MAT=) Off-Line Mode
TYPE: Circuit Card Type (selection)
Line Trunk Package
Control Package
PMN: Port Micro Processor Number
PKG NAME: Circuit Card Name
LP/ISW: Local Partition Number [00-06 (Even Number only)] or ISW Number 
Note
SYSTEM: System Note
0=No.0 System
1=No.1 System
MG: Module Group Number [00-07] 
Note
UNIT: Unit Number [0-3] Note
ACT/ST-BY: ACT/ST-BY information Note
0=ACT
1=ST-BY
2=Not used
NODE: Node Number [0-3]
CLINE: Collection Line 
Note
0=Out of Service
1=In Service
No: IOC Card Number [0/1] 
Note
Note:
This parameter may appear when “Control Package” is selected in the “TYPE” parameter.
    Add page 666 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 638
Issue 1
DPSW: Display Package Switch Status
Buttons
Get: Click to view the display data
Page Up: Click to view the next page data (when next page exists).
Page Down: Click to return to the previous page data.
Exit: Click to exit this command.
Display data
PKG Name: Circuit Card Name
Firm Name/Issue: Firm Name/Issue of the circuit cardEach switch data is also displayed on the dedicated
display page.
Each switch data is also displayed on the dedicated display page.
    Add page 667 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 639
Issue 1
DSTN: Display of Station Data
DSTN:Display of Station Data
1. Functional Outline
This command is used to display the registered Station Data corresponding to the designated Tenant and Sta-
tion Number. In addition, the information of Hot Line, D
term Key Layout, Hunting, and Call Pickup, etc., can
also be displayed as the data related to the designated stations.
2. Parameters
Input data
TN: Tenant Number
STN: Station Number [0-9, #, * (Max. 6 digits)]
Buttons 
[For display data selection]
SHP: Station Hunting Group-Pilot 
Note
KYD: Key Data for Dterm Note
CPG: Call Pickup Group Note
CPE: Call Pickup Expand Group Note
PHN: Phantom Station Number Note
SHC: Station Hunting-Circular Note
SHU: Station Hunting-UCD Note
HLS: Hot Line Station Note
Note:
When the designated station has any of these data, the corresponding button(s) can be selected. If the
data is necessary, click the button(s).
[For execution order]
Get: Click to view the display data.
Close: Click to exit this command.
Display data (by Parameters)
ETN: Effective Tenant Number
LENS: Line Equipment Number (6 digits)
TEC: Telephone Equipment Class [1-31]
1=DP (10pps) 2=PB
3=DP/PB 4=DP (20pps)
5-11=Not used 12=D
term
13=Data Terminal via Dterm14=Hot Line
15=CAS Line 16=Data Terminal via Data Module
17=Not used 18=Virtual Line Appearance (for D
term Multi-Line)
19-22=Not used 23=ISDN Terminal
24-26=Not used 27=8 Conference Equipment
28-31=Not used
RSC: Route Restriction Class [0-15]
SFC: Service Feature Class [0-15]
    Add page 668 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 640
Issue 1
DTELN: Display of Telephone Number Data for NDM
DTELN:Display of Telephone Number Data for NDM
1. Functional Outline
This command is used to display the registered station data corresponding to specified User Group Number
(UGN) and Telephone Number (TELN). The following data related to Number Group can be displayed by
clicking the selection button for each data. This command can be used only when logging in to Network
Control Node (NCN).
ACPGN: Call Pickup Group (NDM)
ACPEN: Call Pickup Expand Group (NDM)
ASHUN: Station Hunting Group-UCD (NDM)
ASHCN: Station Hunting Group-Circular (NDM)
AHLSN: Hot Line Station (NDM)
ASHPN: Station Hunting Group-Pilot (NDM)
AKYD: Key Data for D
term
2. Parameters
Input Data
UGN: User Group Number
TELN: Telephone Number
Display Data
FPC: Fusion Point Code (1-253)
TN: Tenant Number
STN: Station Number
LENS: Line Equipment Number (6 digits)
MG: Module Group Number
UNIT: Unit Number
G: Group Number
LV: Level Number
TEC: Telephone Class (1-31)
RSC: Route Restriction Class (0-15)
SFC: Service Feature Restriction Class (0-15)
Selection Button
CPGN :Call Pickup Group (NDM)
CPEN :Call Pickup Expand Group (NDM)
SHUN :Station Hunting Group-UCD (NDM)
SHCN :Station Hunting Group-Circular (NDM)
HLSN :Hot Line Station (NDM)
SHPN :Station Hunting Group-Pilot (NDM)
KYD :Key Data for D
term
    Add page 669 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 641
Issue 1
DTF101: Display of Terminal Traffic Data
DTF101:Display of Terminal Traffic Data
1. Functional Outline
This command displays the result of traffic measurement data for Type= 1 (Terminal Traffic) assigned by the
ATRF command.
2. Parameters
Traffic Data 1: Terminal Traffic-DTF101
Route Traffic-DTF102
Station Peg Count-DTF103
Attendant Peg Count-DTF104
Route Peg Count-DTF105
Traffic Data 2: Service Peg Count-DTF201
Traffic Data 3: UCD Route Peg Count-DTF301
UCD Group Peg Count-DTF302
UCD Station Peg Count-DTF303
Traffic Data 5: Attendant Answering Peg Count-DTF501
Traffic Data 6: Connection Route Peg Count-DTF601
Connection Route Traffic-DTF602
    Add page 670 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 642
Issue 1
DTF102: Display of Route Traffic Data
DTF102:Display of Route Traffic Data
1. Functional Outline
This command displays the result of traffic measurement data for Type= 2 (Route Traffic) assigned by the
ATRF command.
2. Parameters
Traffic Data 1: Terminal Traffic-DTF101
Route Traffic-DTF102
Station Peg Count-DTF103
Attendant Peg Count-DTF104
Route Peg Count-DTF105
Traffic Data 2: Service Peg Count-DTF201
Traffic Data 3: UCD Route Peg Count-DTF301
UCD Group Peg Count-DTF302
UCD Station Peg Count-DTF303
Traffic Data 5: Attendant Answering Peg Count-DTF501
Traffic Data 6: Connection Route Peg Count-DTF601
Connection Route Traffic-DTF602
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx System Operations And Maintenance Manual