Home > NEC > Communications System > NEC Neax 2400 Ipx System Operations And Maintenance Manual

NEC Neax 2400 Ipx System Operations And Maintenance Manual

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx System Operations And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 724
    							NDA-24307 CHAPTER 3
    Page 163
    Issue 1
    SYSTEM MESSAGES
    [12H] Program Memory Verification Impossible (Fault at CPU side)
    βž€ Detected Error Item
    ➁ Cause for suspended verification
    1: 12XX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    βž€ ➁
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b1 b0
    [12H] Program Memory Verification Impossible (Fault at CPU side)
    01H: CPU-to-CPU communication failure
    02H: Check sum file copy failure 
    						
    							CHAPTER 3 NDA-24307
    Page 164
    Issue 1
    SYSTEM MESSAGES
    [20H] Data Memory Verification Discrepancy
    βž€ Detected Error Item
    ➁ Faulty HFD
    βž‚ Diagnosed Data Memory
    βžƒ Data analyzed by NEC Engineers
    1: 20XX XX00 XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XXXX
    βž€ ➁ βž‚ 
    βžƒ
    4: XXXX XXXX 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b1 b0
    b2 b1 b0
    [20H] Data Memory Verification Discrepancy
    b0: 0/1 = -/HFD 0
    b1: 0/1 = -/HFD 1
    b0: 0/1 = -/Data Memory (DM)
    b1: 0/1 = -/Local Data Memory (LDM)
    b2: 0/1 = -/Network Data Memory (NDM) 
    						
    							NDA-24307 CHAPTER 3
    Page 165
    Issue 1
    SYSTEM MESSAGES
    [21H] Data Memory Verification Impossible (HFD Fault)
    βž€ Detected Error Item
    ➁ Faulty HFD
    βž‚ Diagnosed Data Memory
    βžƒ Error Type
    βž„ Signal Code
    βž… Data analyzed by NEC Engineers
    βž† Error Drive
    Note:When βžƒ (Error Type) is 00H, βž„ Signal Code, βž… and βž† Error Drive are valid.
    DM LDM NDM
    1: 21XX XX00 XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: 0000 0000 0000 0000
    βž€ ➁ βž‚ βžƒ βž„ βž… βž† βžƒ βž„ βž… βž† βžƒ βž„ βž… βž†
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b1 b0
    b2 b1 b0
    b7 b6 b5 b4 b3 b2 b1 b0
    b7 b6 b5 b4 b3 b2 b1 b0
    b3 b2 b1 b0
    [21H] Data Memory Verification Impossible (HFD Fault)
    b0: 0/1 = -/HFD 0
    b1: 0/1 = -/HFD 1
    b0: 0/1 = -/Data Memory (DM)
    b1: 0/1 = -/Local Data Memory (LDM)
    b2: 0/1 = -/Network Data Memory (NDM)
    00H: HD Processing NG
    01H: HD Connection NG
    02H: HD Busy
    03H: HD Fault (Fault processing/No equipment etc.)
    04H: Transfer NG
    05H: Response Timeout
    51H: Data Transfer starts
    53H: File Transfer starts
    55H: Data Load
    b0: 0/1 = -/Drive Number 0
    b1: 0/1 = -/Drive Number 1
    b2: 0/1 = -/Drive Number 2
    b3: 0/1 = -/Drive Number 3 
    						
    							CHAPTER 3 NDA-24307
    Page 166
    Issue 1
    SYSTEM MESSAGES
    [31H] TSW ACT/STBY Changeover Failure (ISW)
    Note:This data is output at the ISW
    βž€ Detected Error Item
    ➁ Active TSW No.
    βž‚ FPC No. of ISW
    βžƒ Number of MUX cards (ACT side) 
    Note
    βž„ Number of MUX cards (STBY 
    side) 
    Note
    Note:This data is displayed when MUX failure occurs in LN side.
    1: 31XX XX00 XXXX 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    βž€ ➁ βž‚  βžƒ βž„
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b0
    b7 b6 b5 b4 b3 b2 b1 b0
    b7 b6 b5 b4 b3 b2 b1 b0
    b7 b6 b5 b4 b3 b2 b1 b0
    [31H] TSW ACT/STBY Changeover Failure (ISW)
    b0: 0/1=TSW No. 0 is ACT/No. 1 is ACT
    b0-b7: Total number of MUX cards mounted in all LNs
    b0-b7: Total number of MUX cards mounted in all LNs 
    						
    							NDA-24307 CHAPTER 3
    Page 167
    Issue 1
    SYSTEM MESSAGES
    [32H] TSW ACT/STBY Changeover Failure (LN)
    Note:This data is collected and output at the ISW.
    βž€ Detected Error Item
    ➁ Active TSW No.
    βž‚ FPC No. of LN
    βžƒ,βž„, βž…, βž† MUX card (ACT side) 
    linkage condition
    1: 32XX XX00 XXXX XXXX 2: XXXX XXXX 0000 0000 3: 0000 0000 0000 0000
    βž€ ➁ βž‚ βžƒ βž„ βž… βž† βž‡ ➈ βž‰
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b0
    b7 b6 b5 b4 b3 b2 b1 b0
    b7 b6 b5 b4 b3 b2 b1 b0
    11
    [32H] TSW ACT/STBY Changeover Failure (LN)
    b0: 0/1 = TSW No. 0 is ACT/No. 1 is ACT
    As shown in the table below, each bit represents the Unit number allocated 
    for each MUX card position. When β€œ1” is set, the corresponding MUX card 
    (status: ACT) has a functional failure.
    MG1 MG0
    Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
    MG3 MG2
    Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
    MG5 MG4
    Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
    MG7 MG6
    Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
    0: -
    1: MUX connection error
    (functional fault/not mounted)
    βžƒ
    βž„
    βž…
    βž† 
    						
    							CHAPTER 3 NDA-24307
    Page 168
    Issue 1
    SYSTEM MESSAGES
    βž‡, ➈, βž‰,  MUX card (STBY side) 
    linkage condition
    b7 b6 b5 b4 b3 b2 b1 b0As shown in the table below, each bit represents the Unit number allocated 
    for each MUX card position. When β€œ1” is set, the corresponding MUX card 
    (status: ACT) has a functional failure.11
    MG1 MG0
    Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
    MG3 MG2
    Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
    MG5 MG4
    Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
    MG7 MG6
    Unit 3 Unit 2 Unit 1 Unit 0 Unit 3 Unit 2 Unit 1 Unit 0
    0: -
    1: MUX connection error
    (functional fault/not mounted)
    βž‡
    ➈
    βž‰
    11 
    						
    							NDA-24307 CHAPTER 3
    Page 169
    Issue 1
    SYSTEM MESSAGES
    [41H] CPU ACT/STBY Changeover Failure
    βž€ Detected Error Item
    ➁ ACT Status Information
    1: 41XX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    βž€ ➁
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b1 b0
    [41H] CPU ACT/STBY Changeover Failure
    b0: CPU
    0/1 = No. 0 is ACT/ No. 1 is ACT
    b1: TSW
    0/1 = No. 0 is ACT/ No. 1 is ACT 
    						
    							CHAPTER 3 NDA-24307
    Page 170
    Issue 1
    SYSTEM MESSAGES
    [42H] CPU ACT/STBY Changeover Failure (DM Verification NG or PM Verification NG)
    βž€ Detected Error Item
    ➁ ACT Status Information
    1: 42XX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    βž€ ➁
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b1 b0
    [42H] CPU ACT/STBY Changeover Failure (DM or PM Verification NG)
    b0: CPU
    0/1 = No. 0 is ACT/No. 1 is ACT
    b1: TSW
    0/1 = No. 0 is ACT/No. 1 is ACT 
    						
    							NDA-24307 CHAPTER 3
    Page 171
    Issue 1
    SYSTEM MESSAGES
    [43H] CPU ACT/STBY Changeover Failure (PCI Fault)
    βž€ Detected Error Item
    ➁ ACT Status Information
    1: 43XX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    βž€ ➁
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b1 b0
    [43H] CPU ACT/STBY Changeover Failure (PCI Fault)
    b0: CPU
    0/1 = No. 0 is ACT/No. 1 is ACT
    b1: TSW
    0/1 = No. 0 is ACT/No. 1 is ACT 
    						
    							CHAPTER 3 NDA-24307
    Page 172
    Issue 1
    SYSTEM MESSAGES
    [44H] CPU ACT/STBY Changeover Failure (Changeover NG or CPU RAM Copy NG)
    βž€ Detected Error Item
    ➁ ACT Status Information
    1: 44XX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    βž€ ➁
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b1 b0
    [44H] CPU ACT/STBY Changeover Failure
    Changeover NG or CPU RAM Copy NG)
    b0: CPU
    0/1 = No. 0 is ACT/No. 1 is ACT
    b1: TSW
    0/1 = No. 0 is ACT/No. 1 is ACT 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx System Operations And Maintenance Manual