NEC Neax 2400 Ipx System Operations And Maintenance Manual
Have a look at the manual NEC Neax 2400 Ipx System Operations And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 228
CHAPTER 3 NDA-24307
Page 200
Issue 1
SYSTEM MESSAGES
This message displays when the main power of the Digital Access Unit (DAU) system is restored to normal,
ending the temporary power acceptance from the battery observed in the message [13-Q] DAU
Battery Operation.”
➀ DAI Card Mounting Location
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7...](http://img.usermanuals.tech/thumb/54/84234/w64_nec-ipx-system-op-and-maint-ipx-u-type_d-227.png "Page 228
CHAPTER 3 NDA-24307
Page 200
Issue 1
SYSTEM MESSAGES
This message displays when the main power of the Digital Access Unit (DAU) system is restored to normal,
ending the temporary power acceptance from the battery observed in the message [13-Q] DAU
Battery Operation.”
➀ DAI Card Mounting Location
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7...")
![Page 232
CHAPTER 3 NDA-24307
Page 204
Issue 1
SYSTEM MESSAGES
This message displays when a VPS failure, observed in the message [15-B], is restored to normal.
➀ LENS of VPS
➁ LENS of VPS
1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
Default Alarm:
NON15-CVPS RestoreDefault Grade:
2Grade Modified: Lamp...](http://img.usermanuals.tech/thumb/54/84234/w64_nec-ipx-system-op-and-maint-ipx-u-type_d-231.png "Page 232
CHAPTER 3 NDA-24307
Page 204
Issue 1
SYSTEM MESSAGES
This message displays when a VPS failure, observed in the message [15-B], is restored to normal.
➀ LENS of VPS
➁ LENS of VPS
1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
Default Alarm:
NON15-CVPS RestoreDefault Grade:
2Grade Modified: Lamp...")
NDA-24307 CHAPTER 3 Page 203 Issue 1 SYSTEM MESSAGES This message displays when a VPS failure is detected. ➀ Probable cause for the failure ➁ LENS of VPS ➂ LENS of VPS 1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ ➂ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 Default Alarm: MN15-BVPS Failure (Permanent)Default Grade: 2Grade Modified: Lamp Modified: b0-b7: 0 = - 01H = Sector error FF = Other than above b0-b2: Level b3-b7: Group b0, b1: Unit b2-b7: Module Group
CHAPTER 3 NDA-24307 Page 204 Issue 1 SYSTEM MESSAGES This message displays when a VPS failure, observed in the message [15-B], is restored to normal. ➀ LENS of VPS ➁ LENS of VPS 1: XXXX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 Default Alarm: NON15-CVPS RestoreDefault Grade: 2Grade Modified: Lamp Modified: b0-b2: Level b3-b7: Group b0, b1: Unit b2-b7: Module Group
NDA-24307 CHAPTER 3 Page 205 Issue 1 SYSTEM MESSAGES This message displays when Intra-Office Trunks (ATI, RST, etc.) have all become busy. ➀ Details on Trunk name and its Route number 1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 Default Alarm: SUP16-AInside Trunk All BusyDefault Grade: 3Grade Modified: Lamp Modified: See table on the following page
CHAPTER 3 NDA-24307 Page 206 Issue 1 SYSTEM MESSAGES ROUTE NO.DATA (HEX.)TRUNK NAMEROUTE NO.DATA (HEX.)TRUNK NAME 901 01 Attendant Console 917 11 MFC Sender 902 02 Originating Register Trunk 918 12 Not used 903 03 Incoming Register Trunk 919 13 MODEM 904 04 MF Receiver 920 14 MODEM 905 05 Sender Trunk DP/PB 921 15 MODEM 906 06 PB Receiver for Automated Attendant Service922 16 MODEM 907 07 AMP 923 17 MODEM 908 08 Not used 924 18 MODEM 909 09 Three-Way Conference Trunk 925 19 MODEM 910 0A Not used 926 1A MODEM 911 0B Not used 927 1B Not used 912 0C Originating Register Trunk for ATTCON/DESKCON928 1C Not used 913 0D Three-Way Conference Trunk for ATTCON/DESKCON929 1D Data Signaling Trunk-Option 914 0E Not used 930 1E Rate Adaptation Conversion Trunk 915 0F Night ATTCON/DESKCON 931 1F Not used 916 10 MFC Register
NDA-24307 CHAPTER 3 Page 207 Issue 1 SYSTEM MESSAGES This message displays when Virtual Tie Line setup has completed. ➀ Counter ➁ Virtual Tie Line Call Header Location ➂ Virtual Tie Line Call Header Location 1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ ➂ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b5 b4 b3 b2 b1 b0 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 Default Alarm: NON16-BVirtual Tie Line Set ReportDefault Grade: 3Grade Modified: Lamp Modified: b0: 00=- 01=Re-setup b0,b1: Unit No. b2: Module Group No. b0-b2: Level b3-b7: Group No.
CHAPTER 3 NDA-24307 Page 208 Issue 1 SYSTEM MESSAGES This message displays when Virtual Tie Line Cancel has completed. ➀ Counter ➁ Virtual Tie Line Call Header Location ➂ Virtual Tie Line Call Header Location 1: XXXX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁➂ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b0 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 Default Alarm: NON16-CVirtual Tie Line Cancel ReportDefault Grade: 3Grade Modified: Lamp Modified: b0: 0/1=-/Re-setup b0,b1: Unit No. b2: Module Group No. b0-b2: Level b3-b7: Group No.
NDA-24307 CHAPTER 3 Page 209 Issue 1 SYSTEM MESSAGES This message displays when Virtual Tie Line Setup has failed due to a fault in the network of the terminating office concerned. ➀ Virtual Tie Line Call Header Location ➁ Virtual Tie Line Call Header Location 1: 00XX XX8X XXXX 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000 ➀ ➁ ➂ ➃ ➄ 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 Default Alarm: NON16-EVirtual Tie Line Set Time OutDefault Grade: 1Grade Modified: Lamp Modified: b0,b1: Unit No. b2: Module Group No. b0-b2: Level b3-b7: Group No.
CHAPTER 3 NDA-24307 Page 210 Issue 1 SYSTEM MESSAGES ➂ Virtual Tie Line Call Header Location ➃ Fault Cause b7 b6 b5 b4 b3 b2 b1 b0 b6 b5 b4 b3 b2 b1 b0 CLASS REASON KIND VA L U E DATAREASON KIND Reason Kind Class Value XX 8765 4321(bit) -000 xxxx -001 Normal Event Class000 000 000 000 000 001 001 001 001 001 001 001 001 001 001 001 0010001 0010 0011 0110 0111 0000 0001 0010 0011 0101 0110 1010 1011 1100 1101 1110 11111 2 3 6 7 16 17 18 19 21 22 26 27 28 29 30 31Dead Number No route to the designated transit network No route to the opposite Party Use of channel not allowed Call terminated to a setup channel Normal disconnection Called user busy No response from called user Called party being rung/no answer Communication denied Opposite party’s terminal number changed Disconnection and release of the user not selected Opposite party’s terminal out of order Invalid number format (Incomplete Number) Facility denied Answer to status inquiry Other normal class b0-b3: Call Source b4-b7:“8” is always indicated. DATA CALL SOURCE 0User 1 Private network to which the user is directly connected. (Self side) 2 National network to which the user is directly connected. (Self side) 3 Tie-Line Network 4 National network to which the opposite party is directly connected. (Opposite party’s side) 5 Private network to which the opposite party is directly connected. (Opposite party’s side) 7 International Network A Network from Interworking Other Spare b0-b3: Reason Kind b4-b6: Class 0=No Answer Other than 0=Refer to the following table
NDA-24307 CHAPTER 3 Page 211 Issue 1 SYSTEM MESSAGES 010 xxxx Classes not allowed use of resources010 010 010 010 010 010 0100010 0110 1001 1010 1011 1100 111134 38 41 42 43 44 47No usable channel/line Network failure Temporary failure Switching system congested Access information discarded Use of requested line/channel not allowed Class not allowed use of other resources Reason Kind Class Value XX 8765 4321(bit) 011 xxxx Classes not allowed use of services011 011 011 011 0110001 0010 1001 1010 111149 50 57 58 63Use of QOS not allowed Requested facility not contracted Bearer capability not allowed Bearer capability not allowed at present Class not allowed to use other services or options 100 xxxx Classes not provided with services100 100 100 100 1000001 0010 0101 0110 111165 66 69 70 79Unprovided bearer capability designated Unprovided channel kind designated Unprovided facility requested Restricted digital information bearer capability Class unprovided with other services or options 101 xxxx Invalid message class 001 101 101 101 101 101 101 101 1010001 0010 0011 0100 0101 0110 1000 1011 111181 82 83 84 85 86 88 91 95Invalid call number used Invalid channel number used Designated transit call ID number unused Transit call ID number being used No transit call Designated transit call disconnected and released Terminal attributes unmatch Invalid transit network selected Other invalid message class 110 xxxx Procedure error (ex: unrecognized message) class110 110 110 110 110 110 110 1100000 0001 0010 0011 0100 0101 0110 111196 97 98 99 100 101 102 111Mandatory information elements inadequate Message kind undefined or unprovided Call status and message unmatching or message kind undefined Information element undefined Content of information element invalid Call status and message unmatching Recovery due to timer over Class of other procedure errors 111 xxxx Interworking class111 111 127 Other interworking class Others Reserved CLASS REASON KIND VA L U E DATAREASON KIND
CHAPTER 3 NDA-24307 Page 212 Issue 1 SYSTEM MESSAGES This message indicates that an outgoing call (by connection acknowledge system) has not received an acknowledgment signal from the opposite office. As a result, the attempted outgoing call is routed to Reorder Tone (ROT) connection. In Case of Station OG/ATT OG/ATT Tandem Connection ➀ Type of connection and station number digits ➁ ~ ➃ Calling station number (See table) 1: XXXX XXXX XX0X XX0X 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XXXX 12➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ ➈ ➉11 12 4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000 7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000 b7 b6 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 Default Alarm: NON16-FSender Start Time OutDefault Grade: 0Grade Modified: Lamp Modified: b0-b2: Digits of station number (origination) b6 -b7: 0 0 = Station OG connection 0 1 = ATT OG connection 1 1 = ATT Tandem connection b4-b7 b0-b3 ➁DC0 DC1 ➂DC2 DC3 ➃DC4 DC5