Home > NEC > Communications System > NEC Neax 2400 Ipx System Operations And Maintenance Manual

NEC Neax 2400 Ipx System Operations And Maintenance Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Ipx System Operations And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 724
    Add page 621 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 593
Issue 1
CHAPTER 8 MAINTENANCE COMMANDS
This chapter explains various commands used in the system administrative management procedure. Table 8-1
shows a list of maintenance commands.
Table 8-1  Command Lis t  
COMMAND COMMAND FULL NAME
ALLC Assignment of Line Load Control
ALMG Assignment of Alarm Grade Data
ATRF Assignment of Traffic Measurement Order
ATRFN Assignment of Traffic Measurement Order for Fusion Network
BOSD Back Up One-Touch Speed Call Memory Data
CADSD Continuous Assignment of Station Data
CATK Continuous Assignment of Trunk Data
CBCN Control of Broadcasting for NDM
CCSE Change of Common Signaling Channel Equipment
CDBU Change of Dch Backup
CMOD Change of System Mode
CMODI Change of System Mode for ISW
CMWL Control Message Waiting Lamp
CMWL_T Control Message Waiting Lamps - Telephone Number
CPRS Controlled Alternate PRSCs
CSCL Continuous Change of Station Class
CSTN Continuous Change of Station Number
DCBD Display of Call Block Entry Data
DCEN Display of Connection Trunk LENS Data for LDM
DCON Display of Connection Status
DFTD Display of System Message Details
DISS Display of Program Issue
DLEN Display of LENS Data
DLSL Display of Lock Out Station - LENS
DLSS Display of Lockout Station - Number
DLSS_T Display of Lock Out Station - Number- Telephone Number
    Add page 622 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 594
Issue 1
MAINTENANCE COMMANDS
DLTEL Display of Telephone Number from LENS for LDM
DNTEL Display of Telephone Number from LENS for NDM
DPKG Display of Setting Port Package
DPSW Display Package Switch Status
DSTN Display of Station Data
DTELN Display of Telephone Number Data for NDM
DTF101 Display of Terminal Traffic Data
DTF102 Display of Route Traffic Data
DTF103 Display of Station Peg Count Data
DTF104 Display of Attendant Peg Count Data
DTF105 Display of Route Peg Count Data
DTF201 Display of Service Peg Count Data
DTF301 Display of UCD Route Peg Count Data
DTF302 Display of UCD Group Peg Count Data
DTF303 Display of Station Peg Count Data
DTF501 Display of Attendant Answering Peg Count Data
DTF601 Display of Connection Route Peg Count Data
DTF602 Display of Connection Route Traffic Data
DTF101N Display of Terminal Traffic Data for Fusion Network
DTF102N Display of Route Traffic Data for Fusion Network
DTF103N Display of Station Peg Count Data for Fusion Network
DTF104N Display of Attendant Peg Count Data for Fusion Network
DTF105N Display of Route Peg Count Data for Fusion Network
DTF201N Display of Service Peg Count Data for Fusion Network
DTF301N Display of UCD Route Peg Count Data for Fusion Network
DTF302N Display of UCD Group Peg Count Data for Fusion Network
DTF303N Display of Station Peg Count Data for Fusion Network
DTF501N Display of Attendant Answering Peg Count Data for Fusion Network
DTF601N Display of Connection Route Peg Count Data for Fusion Network
DTF602N Display of Connection Route Traffic Data for Fusion NetworkTable 8-1  Command List (Continued) 
COMMAND COMMAND FULL NAME
    Add page 623 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 595
Issue 1
MAINTENANCE COMMANDS
FLINST File Install
HDD_FDD Data Control Between HDD and FDD
HDD_MAT Data Control Between HDD and MAT
HDD_MAT_N Data Control Between HDD and MAT for NDM
HDFP HDD Format of PBX
MBCT Make Busy of Connection Trunk for LDM
MBLE Make Busy of LENS
MBPM Make Busy of Port Microprocessor
MBRT Make Busy of Route
MBSM Make Busy of System Message Printout
MBST Make Busy of Station
MBST_T Make Busy of Station - Telephone Number
MBTC Make Busy of Trunk-Continuous
MBTK Make Busy of Trunk
MEM_HDD Data Control Between Memory and HDD
MEM_HDD_N Data Control Between Memory and HDD for NDM
MFCH Make Busy of FCCH
PMBU Port Microprocessor Back Up
RALM Release Alarm
RALMN Release Alarm for NDM
RLST Release Station/Trunk
RLST_T Release Station/Trunk - Telephone Number
SINZ System Initialization
SINZI System Initialization for ISW
SPTS Scanning of Port Status
SRTS Scanning of Route Status
XHFD X-RAY HD or FDD DiagnosisTable 8-1  Command List (Continued) 
COMMAND COMMAND FULL NAME
    Add page 624 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 596
Issue 1
ALLC: Assignment of Line Load Control
ALLC:Assignment of Line Load Control
1. Functional Outline
This command designates the start and stop of line load control.
2. Parameters
Input Data
ALL/ONE: Operation Mode Selection (1,2)
O/A=Only One LP/All LPs
LP: Local Partition (LP) Number 
Note
STATUS: Line Load Control Status (0-3)
0=Stop Line Load Control
1=Start Line Load Control
2=Automatic Line Load Control is in effect (display only)
3=Status of all LPs do not match (display only)
Note:This parameter appears when 0 (only one LP) is set in ALL/ONE input data.
    Add page 625 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 597
Issue 1
ALMG: Assignment of Alarm Grade Data
ALMG:Assignment of Alarm Grade Data
1. Functional Outline
This command makes a flexible change of system message output grades. Thus, the PBX user can give a proper
alarm grade to each system message according to their requirements. When no data is assigned, the default
alarm grades are automatically adopted.
Note:This command cannot change the alarm grade for [6-A] system message.
2. Parameters
Input data
FK: Fault Message Kind (0-7, 10-17, 20-27, 30-37)
FI: Fault Message Index (A-Z)
LMP: Fault Message Lamp Data (0-3)
0=Lamp OFF
1=SUP Lamp ON
2=MN Lamp ON
3=MJ Lamp ON
GRD: Printout Grade (0-3)
TYPE: List-up Type)
1=All Data
2=Changed Data
3=Default Data
SYSM GRD: System Message Output Grade
0=All Messages
1=Not Used
2=MN/MJ Grade Massages
3=MJ Grade Massages
    Add page 626 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 598
Issue 1
ATRF: Assignment of Traffic Measurement Order
AT R F :Assignment of Traffic Measurement Order
1. Functional Outline
This command is used to assign and delete node-level traffic measurement programs. A request for traffic
measurement is performed on each node basis when a traffic measurement instruction has been assigned by
this command. The collected traffic measurement data can be stored on the HD of the MAT, which can be
designated on the basis of traffic measurement type.
2. Parameters
Input Data
TYPE: Type of Traffic Measurement (1-19)
PORT: Traffic Information Output Terminal Number (0-7: IOC, 8: LAN, 9: NMS) 
INTERVAL: Output interval (0, 30-120)
Assign the data (30-120) in 10 minute increments. When assigning 0 (available when any
of TYPE 3-18 is selected), instead specify your desired output time in the OUTPUT
HOUR/MINUTE parameters below.
START HOUR
Note 
START MINUTE
Note 
END HOUR
Note 
END MINUTE
Note 
OUTPUT HOUR: This data is valid only when “INTERVAL”=0.
OUTPUT MINUTE: This data is valid only when “INTERVAL”=0.
START RT: Start External Route Number (available when TYPE 2/5/8 is selected)
END RT: End External Route Number (available when TYPE 2/5/8 is selected)
DATA MEANING DATA MEANING
1 Terminal Traffic 2 Route Traffic
3 Station Peg Count 4 ATT Peg Count
5 Route Peg Count 6 Service Peg Count
8 UCD Route Peg Count 9 UCD Group Peg Count
10 UCD Station Peg Count 15 ATT Answering Peg Count
18 Connection Route Peg Count 19 Connection Route Traffic
    Add page 627 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 599
Issue 1
ATRF: Assignment of Traffic Measurement Order
START C_RT: Start Connection Route Number (available when TYPE 18/19 is selected)
END C_RT: End Connection Route Number (available when TYPE 18/19 is selected)
Note:Assign the traffic measurement time period between START HOUR/MINUTE and END HOUR/
MINUTE longer than an hour. Also, if the measurement should be executed throughout a day, assign
the same data in both START HOUR/MINUTE and END HOUR/MINUTE parameter
    Add page 628 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 600
Issue 1
ATRFN: Assignment of Traffic Measurement Order for Fusion Network
ATRFN:Assignment of Traffic Measurement Order for Fusion Network
1. Functional Outline
This command is used to assign and delete traffic measurement programs available on the Ethernet. A request
for traffic measurement is performed on a network basis when a traffic measurement instruction has been
assigned by this command. The collected traffic measurement data can be stored on the HD of the MAT
(connected to the NCN: Network Control Node), which can be designated on the basis of traffic measurement
type. Note that this command can be used at the NCN only.
2. Parameters
Input Data
TYPE: Type of Traffic Measurement (1-19) 
Note 1
PORT: Traffic Information Output Terminal Number (0-7: IOC, 8: LAN, 9: NMS) 
INTERVAL: Output interval (0, 30-120)
Assign the data (30-120) in 10 minute increments. When assigning 0 (avail-
able when any of TYPE 3-18 is selected), instead specify your desired output
time in the “OUTPUT HOUR/MINUTE” parameters below.
START HOUR
Note 2, Note 3
START MINUTENote 2, Note 3
END HOURNote 2, Note 3
END MINUTENote 2, Note 3
OUTPUT HOUR: This data is valid only when “INTERVAL”=0.
OUTPUT MINUTE: This data is valid only when “INTERVAL”=0.
START LGRT: Start Logical Route Number (available when TYPE 2/5/8 is selected)
DATA MEANING DATA MEANING
1 Terminal Traffic 2 Route Traffic
3 Station Peg Count 4 ATT Peg Count
5 Route Peg Count 6 Service Peg Count
8 UCD Route Peg Count 9 UCD Group Peg Count
10 UCD Station Peg Count 15 ATT Answering Peg Count
18 Connection Route Peg Count 19 Connection Route Traffic
    Add page 629 to Favourites
    image text
    Enable zoom 
    							NDA-24307 CHAPTER 8
Page 601
Issue 1
ATRFN: Assignment of Traffic Measurement Order for Fusion Network
END LGRT: End Logical Route Number (available when TYPE 2/5/8 is selected)
START C_RT: Start Connection Route Number (available when TYPE 18/19 is selected)
END C_RT: End Connection Route Number (available when TYPE 18/19 is selected)
Note 1:The selected traffic measurement data, except for TYPE 1 (Terminal Traffic), is collected with the
whole network systems as a single unit.
Note 2:When time difference exists between the nodes, confirm that the related time difference data, based on
the UCT (Universal Coordinated Time) standard, has been assigned at each node via the ATDF com-
mand.
Note 3:Assign the traffic measurement time period between START HOUR/MINUTE and END HOUR/
MINUTE longer than an hour. Also, if the measurement should be executed throughout a day, assign
the same data in both START HOUR/MINUTE and END HOUR/MINUTE parameters.
Note 4:If the data for this command is once assigned, the node-level data by the ATRF command is not
cleared, but loses its validity (the network-level data takes precedence).
    Add page 630 to Favourites
    image text
    Enable zoom 
    							CHAPTER 8 NDA-24307
Page 602
Issue 1
BOSD: Back Up One-Touch Speed Call Memory Data
BOSD:Back Up One-Touch Speed Call Memory Data
1. Functional Outline
Save Function
Saves the data residing in the One-Touch Speed Call Memory of ELC card onto a floppy disk.
Verify Function
Verifies the One-Touch Speed Call Memory data saved on the floppy disk with the data residing in the
One-Touch Speed Call Memory of ELC card.
Load Function
Loads the One-Touch Speed Call Memory data saved in the floppy disk into the One-Touch Speed Call
Memory of ELC card.
2. Parameters
Input data
Direction Select: PBX Memory to MAT/MAT to PBX Memory / Verify MAT against MEM
Data Type Selection: by Station / by LEN
Begin TN:
Note 1
End TN:Note 1
Begin STN:Note 1
End STN:Note 1
Begin LEN:Note 2
End LEN:Note 2
Auto Verify Afterward: Click ON/OFF=Checked/Unchecked
File Name and Path
Note 1:When “by Station” is designated
Note 2:When “by LEN” is designated
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Ipx System Operations And Maintenance Manual