NEC Neax 2400 Imx System Operations And Maintenance Manual
Have a look at the manual NEC Neax 2400 Imx System Operations And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 586
NDA-24238 CHAPTER 8
Page 559
Revision 3.0
MAINTENANCE COMMANDS
DPKG:Display of Setting Port Package
1. Functional Outline
This command is used to display the circuit card name accommodated in each Group of a specific UNIT.
Note:When using this command, make sure that each circuit card related database files have already been
installed to your MAT. (See FLINST command for more information.)
2. Parameters
Input Data
MG: Module Group (MG) number [00-07]
UNIT: Unit (U) number [0-3]
Buttons
Get: Click to get...](http://img.usermanuals.tech/thumb/54/84348/w64_nec-neax2400-imx-system-operations-and-maintenance-manual_d-585.png "Page 586
NDA-24238 CHAPTER 8
Page 559
Revision 3.0
MAINTENANCE COMMANDS
DPKG:Display of Setting Port Package
1. Functional Outline
This command is used to display the circuit card name accommodated in each Group of a specific UNIT.
Note:When using this command, make sure that each circuit card related database files have already been
installed to your MAT. (See FLINST command for more information.)
2. Parameters
Input Data
MG: Module Group (MG) number [00-07]
UNIT: Unit (U) number [0-3]
Buttons
Get: Click to get...")
![Page 587
CHAPTER 8 NDA-24238
Page 560
Revision 3.0
MAINTENANCE COMMANDS
DPSW:Display Package Switch Status
1. Functional Outline
This command is used to display the following information on a Line/Trunk or Control circuit card:
[When MAT is in On-Line Mode (=connected to the system)]
Current status of each switch
Explanation of each switch function
[When MAT is in Off-Line Mode (= not connected to the system)]
Explanation of each switch function
Note 1:When using this command, make sure that each circuit...](http://img.usermanuals.tech/thumb/54/84348/w64_nec-neax2400-imx-system-operations-and-maintenance-manual_d-586.png "Page 587
CHAPTER 8 NDA-24238
Page 560
Revision 3.0
MAINTENANCE COMMANDS
DPSW:Display Package Switch Status
1. Functional Outline
This command is used to display the following information on a Line/Trunk or Control circuit card:
[When MAT is in On-Line Mode (=connected to the system)]
Current status of each switch
Explanation of each switch function
[When MAT is in Off-Line Mode (= not connected to the system)]
Explanation of each switch function
Note 1:When using this command, make sure that each circuit...")
![Page 588
NDA-24238 CHAPTER 8
Page 561
Revision 3.0
MAINTENANCE COMMANDS
DSTN:Display of Station Data
1. Functional Outline
This command is used to display the registered Station Data corresponding to the designated Tenant and
Station Number. In addition, the information of Hot Line, D
term Key Layout, Hunting, and Call Pickup, etc,
can also be displayed as the data related to the designated stations.
2. Parameters
Input Data
TN: Tenant Number
STN: Station Number [0-9, #, * (Max. 6 digits)]
Buttons
[For display...](http://img.usermanuals.tech/thumb/54/84348/w64_nec-neax2400-imx-system-operations-and-maintenance-manual_d-587.png "Page 588
NDA-24238 CHAPTER 8
Page 561
Revision 3.0
MAINTENANCE COMMANDS
DSTN:Display of Station Data
1. Functional Outline
This command is used to display the registered Station Data corresponding to the designated Tenant and
Station Number. In addition, the information of Hot Line, D
term Key Layout, Hunting, and Call Pickup, etc,
can also be displayed as the data related to the designated stations.
2. Parameters
Input Data
TN: Tenant Number
STN: Station Number [0-9, #, * (Max. 6 digits)]
Buttons
[For display...")
CHAPTER 8 NDA-24238 Page 564 Revision 3.0 MAINTENANCE COMMANDS DTF101:Display of Terminal Traffic Data 1. Functional Outline This command displays the result of traffic measurement data for Type=1 (Terminal Traffic) assigned by the ATRF command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101 Route Traffic-DTF102 Station Peg Count-DTF103 Attendant Peg Count-DTF104 Route Peg Count-DTF105 Traffic Data 2: Service Peg Count-DTF201 Traffic Data 3: UCD Route Peg Count-DTF301 UCD Group Peg Count-DTF302 UCD Station Peg Count-DTF303 Traffic Data 5: Attendant Ans. Peg Count-DTF501 Traffic Data 6: Connection Route Peg Count-DTF601 Connection Route Traffic-DTF602
NDA-24238 CHAPTER 8 Page 565 Revision 3.0 MAINTENANCE COMMANDS DTF102:Display of Route Traffic Data 1. Functional Outline This command displays the result of traffic measurement data for Type=2 (Route Traffic) assigned by the ATRF command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101 Route Traffic-DTF102 Station Peg Count-DTF103 Attendant Peg Count-DTF104 Route Peg Count-DTF105 Traffic Data 2: Service Peg Count-DTF201 Traffic Data 3: UCD Route Peg Count-DTF301 UCD Group Peg Count-DTF302 UCD Station Peg Count-DTF303 Traffic Data 5: Attendant Ans. Peg Count-DTF501 Traffic Data 6: Connection Route Peg Count-DTF601 Connection Route Traffic-DTF602
CHAPTER 8 NDA-24238 Page 566 Revision 3.0 MAINTENANCE COMMANDS DTF103:Display of Station Peg Count Data 1. Functional Outline This command displays the result of traffic measurement data for Type=3 (Station Peg Count) assigned by the ATRF command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101 Route Traffic-DTF102 Station Peg Count-DTF103 Attendant Peg Count-DTF104 Route Peg Count-DTF105 Traffic Data 2: Service Peg Count-DTF201 Traffic Data 3: UCD Route Peg Count-DTF301 UCD Group Peg Count-DTF302 UCD Station Peg Count-DTF303 Traffic Data 5: Attendant Ans. Peg Count-DTF501 Traffic Data 6: Connection Route Peg Count-DTF601 Connection Route Traffic-DTF602
NDA-24238 CHAPTER 8 Page 567 Revision 3.0 MAINTENANCE COMMANDS DTF104:Display of Attendant Peg Count Data 1. Functional Outline This command displays the result of traffic measurement data for Type=4 (ATT Peg Count) assigned by the ATRF command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101 Route Traffic-DTF102 Station Peg Count-DTF103 Attendant Peg Count-DTF104 Route Peg Count-DTF105 Traffic Data 2: Service Peg Count-DTF201 Traffic Data 3: UCD Route Peg Count-DTF301 UCD Group Peg Count-DTF302 UCD Station Peg Count-DTF303 Traffic Data 5: Attendant Ans. Peg Count-DTF501 Traffic Data 6: Connection Route Peg Count-DTF601 Connection Route Traffic-DTF602
CHAPTER 8 NDA-24238 Page 568 Revision 3.0 MAINTENANCE COMMANDS DTF105:Display of Route Peg Count Data 1. Functional Outline This command displays the result of traffic measurement data for Type=5 (Route Peg Count) assigned by the ATRF command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101 Route Traffic-DTF102 Station Peg Count-DTF103 Attendant Peg Count-DTF104 Route Peg Count-DTF105 Traffic Data 2: Service Peg Count-DTF201 Traffic Data 3: UCD Route Peg Count-DTF301 UCD Group Peg Count-DTF302 UCD Station Peg Count-DTF303 Traffic Data 5: Attendant Ans. Peg Count-DTF501 Traffic Data 6: Connection Route Peg Count-DTF601 Connection Route Traffic-DTF602
NDA-24238 CHAPTER 8 Page 569 Revision 3.0 MAINTENANCE COMMANDS DTF201:Display of Service Peg Count Data 1. Functional Outline This command displays the result of traffic measurement data for Type=6 (Service Peg Count) assigned by the ATRF command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101 Route Traffic-DTF102 Station Peg Count-DTF103 Attendant Peg Count-DTF104 Route Peg Count-DTF105 Traffic Data 2: Service Peg Count-DTF201 Traffic Data 3: UCD Route Peg Count-DTF301 UCD Group Peg Count-DTF302 UCD Station Peg Count-DTF303 Traffic Data 5: Attendant Ans. Peg Count-DTF501 Traffic Data 6: Connection Route Peg Count-DTF601 Connection Route Traffic-DTF602
CHAPTER 8 NDA-24238 Page 570 Revision 3.0 MAINTENANCE COMMANDS DTF301:Display of UCD Route Peg Count Data 1. Functional Outline This command displays the result of traffic measurement data for Type=8 (UCD Route Peg Count) assigned by the ATRF command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101 Route Traffic-DTF102 Station Peg Count-DTF103 Attendant Peg Count-DTF104 Route Peg Count-DTF105 Traffic Data 2: Service Peg Count-DTF201 Traffic Data 3: UCD Route Peg Count-DTF301 UCD Group Peg Count-DTF302 UCD Station Peg Count-DTF303 Traffic Data 5: Attendant Ans. Peg Count-DTF501 Traffic Data 6: Connection Route Peg Count-DTF601 Connection Route Traffic-DTF602
NDA-24238 CHAPTER 8 Page 571 Revision 3.0 MAINTENANCE COMMANDS DTF302:Display of UCD Group Peg Count Data 1. Functional Outline This command displays the result of traffic measurement data for Type=9 (UCD Group Peg Count) assigned by the ATRF command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101 Route Traffic-DTF102 Station Peg Count-DTF103 Attendant Peg Count-DTF104 Route Peg Count-DTF105 Traffic Data 2: Service Peg Count-DTF201 Traffic Data 3: UCD Route Peg Count-DTF301 UCD Group Peg Count-DTF302 UCD Station Peg Count-DTF303 Traffic Data 5: Attendant Ans. Peg Count-DTF501 Traffic Data 6: Connection Route Peg Count-DTF601 Connection Route Traffic-DTF602
CHAPTER 8 NDA-24238 Page 572 Revision 3.0 MAINTENANCE COMMANDS DTF303:Display of Station Peg Count Data 1. Functional Outline This command displays the result of traffic measurement data for Type=10 (UCD Station Peg Count) assigned by the ATRF command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101 Route Traffic-DTF102 Station Peg Count-DTF103 Attendant Peg Count-DTF104 Route Peg Count-DTF105 Traffic Data 2: Service Peg Count-DTF201 Traffic Data 3: UCD Route Peg Count-DTF301 UCD Group Peg Count-DTF302 UCD Station Peg Count-DTF303 Traffic Data 5: Attendant Ans. Peg Count-DTF501 Traffic Data 6: Connection Route Peg Count-DTF601 Connection Route Traffic-DTF602
NDA-24238 CHAPTER 8 Page 573 Revision 3.0 MAINTENANCE COMMANDS DTF501:Display of Attendant Answering Peg Count Data 1. Functional Outline This command displays the result of traffic measurement data for Type=15 (ATT Answering Peg Count) assigned by the ATRF command. 2. Parameters Traffic Data 1: Terminal Traffic-DTF101 Route Traffic-DTF102 Station Peg Count-DTF103 Attendant Peg Count-DTF104 Route Peg Count-DTF105 Traffic Data 2: Service Peg Count-DTF201 Traffic Data 3: UCD Route Peg Count-DTF301 UCD Group Peg Count-DTF302 UCD Station Peg Count-DTF303 Traffic Data 5: Attendant Ans. Peg Count-DTF501 Traffic Data 6: Connection Route Peg Count-DTF601 Connection Route Traffic-DTF602