Home > NEC > Communications System > NEC Neax 2400 Imx System Operations And Maintenance Manual

NEC Neax 2400 Imx System Operations And Maintenance Manual

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Imx System Operations And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 647
    							CHAPTER 3 NDA-24238
    Page 124
    Revision 3.0
    SYSTEM MESSAGES
    In a specific time cycle, the system allows a routine diagnosis in its hardware and software to determine if they
    are operating properly. This message indicates that the system has been checked by the routine diagnosis pro-
    gram and the result of the diagnosis is normal.
    ➀ Performed Diagnosis Item
    Note:The data in this area will be diverse, according to the diagnosis specified in ➀. For details on each
    item data, see the following pages.
    1: XXXX XXXX XXXX XXXX 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    Note
    ➀ 
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b7 b6 b5 b4 b3 b2 b1 b0
    Default Alarm:
    NON7-OCyclic Diagnosis NormalDefault Grade:
    3Grade Modified: Lamp Modified:
    [00H] Routine Diagnosis Start
    [10H] Program Memory Verification Normal End
    [20H] Data Memory Verification Normal End
    [30H] TSW ACT/STBY Changeover Normal End
    [40H] CPU ACT/STBY Changeover Normal End
    [50H] No Trunk Ineffective Hold
    [70H] Call Forwarding Memory Clear Normal End
    [A0H] Periodic Back-up Normal End
    [C0H] Detection of Remaining Link Normal End 
    						
    							NDA-24238 CHAPTER 3
    Page 125
    Revision 3.0
    SYSTEM MESSAGES
    [00H] Routine Diagnosis Start
    ➀ Performed Diagnosis Item
    ➁ Pending Diagnosis Menu (SYS1, 
    Index 89)
    ➂ Pending Diagnosis Menu (SYS1, 
    Index 90)
    1: 00XX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    ➀ ➁ ➂
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b7 b6 b5 b4 b3 b2 b1 b0
    b7 b1 b0
    [00H] Routine Diagnosis Start
    b0: 0/1=-/Program Memory Verification
    b1: 0/1=-/Data Memory Verification
    b2: 0/1=-/TSW ACT/STBY Changeover
    b3: 0/1=-/CPU ACT/STBY Changeover
    b4: 0/1=-/Trunk Ineffective Hold Check
    b5: 0/1=-/Trunk Ineffective Hold Detection
    b6: 0/1=-/Call Forwarding Memory clear
    b7: 0/1=-/IP ACT/STBY changeover
    b0: Not used
    b1: Periodic Back-up
    b2-b7: Not used 
    						
    							CHAPTER 3 NDA-24238
    Page 126
    Revision 3.0
    SYSTEM MESSAGES
    [10H] Program Memory Verification Normal End
    ➀ Routine Diagnosis
    ➁ Information on HD
    ➂ Verification of Drive Number
    1: 10XX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    ➀ ➁ ➂
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b7 b1 b0
    b7 b3 b2 b1 b0
    [10H] Program Memory Verification Normal End
    b0: 0/1 = -/HFC 0 is normal
    b1: 0/1 = -/HFC 1 is normal
    b0: 0/1 = -/Drive Number 0
    b1: 0/1 = -/Drive Number 1
    b2: 0/1 = -/Drive Number 2
    b3: 0/1 = -/Drive Number 3 
    						
    							NDA-24238 CHAPTER 3
    Page 127
    Revision 3.0
    SYSTEM MESSAGES
    [20H] Data Memory Verification Normal End
    ➀ Routine Diagnosis
    ➁ Verification of HD
    ➂ Verification of Data Memory
    1: 20XX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    ➀ ➁ ➂
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b7 b1 b0
    b7 b2 b1 b0
    [20H] Data Memory Verification Normal End
    b0: 0/1 = -/HFC 0 is normal
    b1: 0/1 = -/HFC 1 is normal
    b0: 0/1 = -/Data Memory
    b1: 0/1 = -/Local Data Memory
    b2: 0/1 = -/Network Data Memory 
    						
    							CHAPTER 3 NDA-24238
    Page 128
    Revision 3.0
    SYSTEM MESSAGES
    [30H] TSW ACT/STBY Changeover Normal End
    ➀ Routine Diagnosis
    ➁ Active TSW system after 
    changeover
    1: 30XX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    ➀ ➁
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b7 b0
    [30H] TSW ACT/STBY Changeover Normal End
    b0: 0/1 = TSW No. 0 is ACT/
    TSW No. 1 is ACT 
    						
    							NDA-24238 CHAPTER 3
    Page 129
    Revision 3.0
    SYSTEM MESSAGES
    [40H] CPU ACT/STBY Changeover Normal End
    ➀ Routine Diagnosis
    ➁ Active CPU system
    1: 40XX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    ➀ ➁
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b7 b1 b0
    [40H] CPU ACT/STBY Changeover Normal End
    b0: CPU
    0/1 = #0 is ACT/#1 is ACT
    b1: TSW
    0/1 = #0 is ACT/#1 is ACT 
    						
    							CHAPTER 3 NDA-24238
    Page 130
    Revision 3.0
    SYSTEM MESSAGES
    [50H] No Trunk Ineffective Hold
    ➀ Routine Diagnosis
    ➁ MG and Unit of No. of Trunk 
    Ineffective Hold
    1: 50XX 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    ➀ ➁
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b7 b6 b5 b4 b3 b2 b1 b0
    [50H] Trunk Ineffective Hold
    b0: Unit 0, Even-numbered MG 
    1 = No Trunk Ineffective Hold
    b1: Unit 1, Even-numbered MG 
    1 = No Trunk Ineffective Hold
    b2: Unit 2, Even-numbered MG 
    1 = No Trunk Ineffective Hold
    b3: Unit 3, Even-numbered MG 
    1 = No Trunk Ineffective Hold
    b4: Unit 0, Odd-numbered MG 
    1 = No Trunk Ineffective Hold
    b5: Unit 1, Odd-numbered MG 
    1 = No Trunk Ineffective Hold
    b6: Unit 6, Odd-numbered MG 
    1 = No Trunk Ineffective Hold
    b7: Unit 3, Odd-numbered MG 
    1 = No Trunk Ineffective Hold 
    						
    							NDA-24238 CHAPTER 3
    Page 131
    Revision 3.0
    SYSTEM MESSAGES
    [70H] Call Forwarding Memory Clear Normal End
    ➀ Routine Diagnosis
    1: 7000 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    ➀ 
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    [70H] Call Forwarding Memory Clear Normal End 
    						
    							CHAPTER 3 NDA-24238
    Page 132
    Revision 3.0
    SYSTEM MESSAGES
    [A0H] Periodic Back-up Normal
    ➀ Routine Diagnosis
    ➁ Information on Periodic Backup 
    Normal End
    ➂ Backup Data to No. 0 system
    ➃Backup Data to No. 1 system
    Note:Number Sharing data load also affects the data load of Dual Station Calling Over-FCCS.
    1: A0XX XX00 0000 XX00 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    ➀ ➁ ➂ ➃
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b7 b1 b0
    b7 b6 b5 b4 b3 b2 b1 b0
    b7 b6 b5 b4 b3 b2 b1 b0
    [A0H] Periodic Back-up Normal
    b0: 0/1 = HFD0 Normal end/Abnormal end
    b1: 0/1 = HFD1 Normal end/Abnormal end
    b0: 0/1 = -/Individual Speed Calling Data
    b1: 0/1 = -/Call Forwarding Data
    b2: 0/1 = -/RCF
    b3: 0/1 = -/Name Display Data
    b4: 0/1 = -/User Assign Soft Key Data
    b5: 0/1 = -/Number Sharing DataNote
    b6: 0/1 = -/Call Block Data
    b0: 0/1 = -/Individual Speed Calling Data
    b1: 0/1 = -/Call Forwarding Data
    b2: 0/1 = -/RCF
    b3: 0/1 = -/Name Display Data
    b4: 0/1 = -/User Assign Soft Key Data
    b5: 0/1 = -/Number Sharing DataNote
    b6: 0/1 = -/Call Block Data 
    						
    							NDA-24238 CHAPTER 3
    Page 133
    Revision 3.0
    SYSTEM MESSAGES
    [C0H] Detection of Remaining Link Normal End 
    ➀ Performed Diagnosis Item
    1: C0XX XX00 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
    ➀ ➁
    4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
    7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
    b7 b6 b5 b4 b3 b2 b1 b0
    [C0H] Detection of Remaining Link Normal End 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Imx System Operations And Maintenance Manual