NEC Neax 2400 Imx System Operations And Maintenance Manual
Have a look at the manual NEC Neax 2400 Imx System Operations And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 540
NDA-24238 CHAPTER 7
Page 513
Revision 3.0
ROUTINE MAINTENANCE PROCEDURE
Register/Sender Trunk (RST)
TEST TYPE TEST ITEM CONNECTION DIAGRAM
ORT Function Perform the test by specifying
an ORT using the Connection
Test-Station.
Confirm that [6-I] system
message displays as a result of
the test.DP/PB
SENDER Function Perform the test by specifying
an ORT using the Connection
Test-Station.
Confirm that [6-I] system
message displays as a result of
the test.
LC
ORT
LC~
SND
ORT](http://img.usermanuals.tech/thumb/54/84348/w64_nec-neax2400-imx-system-operations-and-maintenance-manual_d-539.png "Page 540
NDA-24238 CHAPTER 7
Page 513
Revision 3.0
ROUTINE MAINTENANCE PROCEDURE
Register/Sender Trunk (RST)
TEST TYPE TEST ITEM CONNECTION DIAGRAM
ORT Function Perform the test by specifying
an ORT using the Connection
Test-Station.
Confirm that [6-I] system
message displays as a result of
the test.DP/PB
SENDER Function Perform the test by specifying
an ORT using the Connection
Test-Station.
Confirm that [6-I] system
message displays as a result of
the test.
LC
ORT
LC~
SND
ORT")
![Page 542
NDA-24238 CHAPTER 7
Page 515
Revision 3.0
ROUTINE MAINTENANCE PROCEDURE
Digital Conference Function
TEST TYPE TEST ITEM CONNECTION DIAGRAM
Three-way
Conversation Perform the test by specifying
an 8CFT using the Connection
Test-Station.
Confirm that [6-I] system
message displays as a result of
the test.
FUNCTION
TRUNK NO.SPEECH RELEASE REMARKS
CFT0
1
2
3
4
5
6
7
Speech Path for Each PIM, and Ringing Generator Unit
NO. TEST TYPE TEST ITEM CONNECTION DIAGRAM
1 The ATTCON/
DESKCON is called
from...](http://img.usermanuals.tech/thumb/54/84348/w64_nec-neax2400-imx-system-operations-and-maintenance-manual_d-541.png "Page 542
NDA-24238 CHAPTER 7
Page 515
Revision 3.0
ROUTINE MAINTENANCE PROCEDURE
Digital Conference Function
TEST TYPE TEST ITEM CONNECTION DIAGRAM
Three-way
Conversation Perform the test by specifying
an 8CFT using the Connection
Test-Station.
Confirm that [6-I] system
message displays as a result of
the test.
FUNCTION
TRUNK NO.SPEECH RELEASE REMARKS
CFT0
1
2
3
4
5
6
7
Speech Path for Each PIM, and Ringing Generator Unit
NO. TEST TYPE TEST ITEM CONNECTION DIAGRAM
1 The ATTCON/
DESKCON is called
from...")
CHAPTER 7 NDA-24238 Page 514 Revision 3.0 ROUTINE MAINTENANCE PROCEDURE RST (/) FUNCTION TRUNK NO.ORT SENDER REMARKS PB RECEIVING DP RECEIVING RST No.ORT0 SND0 11 22 33 44 55 66 77 RST No.00 11 22 33 44 55 66 77 RST No.00 11 22 33 44 55 66 77 RST No.00 11 22 33 44 55 66 77
NDA-24238 CHAPTER 7 Page 515 Revision 3.0 ROUTINE MAINTENANCE PROCEDURE Digital Conference Function TEST TYPE TEST ITEM CONNECTION DIAGRAM Three-way Conversation Perform the test by specifying an 8CFT using the Connection Test-Station. Confirm that [6-I] system message displays as a result of the test. FUNCTION TRUNK NO.SPEECH RELEASE REMARKS CFT0 1 2 3 4 5 6 7 Speech Path for Each PIM, and Ringing Generator Unit NO. TEST TYPE TEST ITEM CONNECTION DIAGRAM 1 The ATTCON/ DESKCON is called from one station in each PIM.Normal speech path is confirmed by calling the attendant from a station located in each PIM. LC ~ TSTT INT / TSW 8CFT ~ ATI ATTCON/ LC DESKCON
CHAPTER 7 NDA-24238 Page 516 Revision 3.0 ROUTINE MAINTENANCE PROCEDURE 2 The operator calls the station back.After normal speech path has been confirmed, the attendant calls the station back. Confirm that the station rings. MOUNTING LOCATION CHECK REMARKS MODULE NAME UNIT NAME PIM10 1 2 3 PIM20 1 2 3 PIM30 1 2 3 PIM40 1 2 3 Speech Path for Each PIM, and Ringing Generator Unit (Continued) NO. TEST TYPE TEST ITEM CONNECTION DIAGRAM ATI ATTCON/ LC ~ PWR0, 1 RG (RINGING) DESKCON
NDA-24238 CHAPTER 7 Page 517 Revision 3.0 ROUTINE MAINTENANCE PROCEDURE Attendant Console (ATTCON/DESKCON) TEST TYPE TEST ITEM CONNECTION DIAGRAM Call Termination Test Station dials the operator access code and confirm that the call termination is indicated at all the ATTCON/ DESKCON. Station dials the operator access code. An attendant answers and speaks with the caller. This process is repeated at all the ATTCON/ DESKCON. Call Origination Test Attendant originates a call to the station by pressing LOOP keys one after another. ATI ATTCON/ LC DESKCON ATTCON/ LC ~RG (RINGING) ATI DESKCON
CHAPTER 7 NDA-24238 Page 518 Revision 3.0 ROUTINE MAINTENANCE PROCEDURE FUNCTION ATTCON/ DESKCON NO.CALL TERMINATION CALL ORIGINATION REMARKS INCOMING CALL INDICATIONSPEECH RELEASE SPEECH RELEASE 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
NDA-24238 CHAPTER 8 Page 519 Revision 3.0 MAINTENANCE COMMANDS CHAPTER 8 MAINTENANCE COMMANDS 1. GENERAL This chapter explains various commands and list up commands which are used in the system administrative management procedure. The table below shows the list of commands. Table 8-1 Command List COMMAND COMMAND FULL NAME REMARKS ALLC Assignment of Line Load Control ALMG Assignment of Alarm Grade Data ATRF Assignment of Traffic Measurement Order ATRFN Assignment of Traffic Measurement Order for Fusion Network BOSD Back Up One-Touch Speed Call Memory Data CADSD Continuous Assignment of Station Data CATK Continuous Assignment of Trunk Data CBCN Control of Broadcasting for NDM CCSE Change of Common Signaling Channel Equipment CDBU Change of Dch Backup CMOD Change of System Mode CMWL Control Message Waiting Lamp CMWL_T Control Message Waiting Lamps – Telephone Number CPRS Controlled Alternate PRSCs CSCL Continuous Change of Station Class CSTN Continuous Change of Station Number DCBD Display of Call Block Entry Data DCEN Display of Connection Trunk LENS Data for LDM DCON Display of Connection Status DFTD Display of System Message Details DISS Display of Program Issue DLEN Display of LENS Data DLSL Display of Lockout Station - LENS DLSS Display of Lockout Station - Number DLSS_T Display of Lock Out Station – Number – Telephone Number
CHAPTER 8 NDA-24238 Page 520 Revision 3.0 MAINTENANCE COMMANDS DLTEL Display of Telephone Number from LENS for LDM DNTEL Display of Telephone Number from LENS for NDM DPKG Display of Setting Port Package DPSW Display Package Switch Status DSTN Display of Station Data DTELN Display of Telephone Number Data for NDM DTF101 Display of Terminal Traffic Data DTF102 Display of Route Traffic Data DTF103 Display of Station Peg Count Data DTF104 Display of Attendant Peg Count Data DTF105 Display of Route Peg Count Data DTF201 Display of Service Peg Count Data DTF301 Display of UCD Route Peg Count Data DTF302 Display of UCD Group Peg Count Data DTF303 Display of Station Peg Count Data DTF501 Display of Attendant Answering Peg Count Data DTF601 Display of Connection Route Peg Count Data DTF602 Display of Connection Route Traffic Data DTF101N Display of Terminal Traffic Data for Fusion Network DTF102N Display of Route Traffic Data for Fusion Network DTF103N Display of Station Peg Count Data for Fusion Network DTF104N Display of Attendant Peg Count Data for Fusion Network DTF105N Display of Route Peg Count Data for Fusion Network DTF201N Display of Service Peg Count Data for Fusion Network DTF301N Display of UCD Route Peg Count Data for Fusion Network DTF302N Display of UCD Group Peg Count Data for Fusion Network DTF303N Display of UCD Station Peg Count Data for Fusion Network DTF501N Display of Attendant Answering Peg Count Data for Fusion Network DTF601N Display of Connection Route Peg Count Data for Fusion Network DTF602N Display of Connection Route Traffic Data for Fusion NetworkTable 8-1 Command List (Continued) COMMAND COMMAND FULL NAME REMARKS
NDA-24238 CHAPTER 8 Page 521 Revision 3.0 MAINTENANCE COMMANDS FLINST File Install HDD_FDD Data Control Between HDD and FDD HDD_MAT Data Control Between HDD and MAT HDD_MAT_N Data Control Between HDD and MAT for NDM HDFP HDD Format of PBX MBCT Make Busy of Connection Trunk for LDM MBLE Make Busy of LENS MBPM Make Busy of Port Microprocessor MBRT Make Busy of Route MBSM Make Busy of System Message Printout MBST Make Busy of Station MBST_T Make Busy of Station – Telephone Number MBTC Make Busy of Trunk-Continuous MBTK Make Busy of Trunk MEM_HDD Data Control Between Memory and HDD MEM_HDD_N Data Control Between Memory and HDD for NDM MFCH Make Busy of FCCH PMBU Port Microprocessor Back Up RALM Release Alarm RALMN Release Alarm for NDM RLST Release Station/Trunk RLST_T Release of Station/Trunk – Telephone Number SINZ System Initialization SPTS Scanning of Port Status SRTS Scanning of Route Status XHFD X-RAY HD or FDD DiagnosisTable 8-1 Command List (Continued) COMMAND COMMAND FULL NAME REMARKS
CHAPTER 8 NDA-24238 Page 522 Revision 3.0 MAINTENANCE COMMANDS ALLC:Assignment of Line Load Control 1. Functional Outline This command designates the start and stop of line load control. 2. Parameters Input Data ALL/ONE: Operation Mode Selection (1,2) A=All LPs A is not valid for 1-IMG-system. O=Only One LP LP: Local Partition (LP) Number Note:This parameter appears when O (only one LP) is set in ALL/ONE input data. The data is designated as 00 for 1-IMG-system. STATUS: Line Load Control Status (0-3) 0=Stop Line Load Control 1=Start Line Load Control 2=Automatic Line Load Control is in effect (display only) 3=Status of all LPs do not match (display only)
NDA-24238 CHAPTER 8 Page 523 Revision 3.0 MAINTENANCE COMMANDS ALMG:Assignment of Alarm Grade Data 1. Functional Outline This command makes a flexible change of system message output grades. Thus, the PBX user can give a proper alarm grade to each system message according to their requirements. When no data is assigned, the default alarm grades are automatically adopted. Note:This command cannot change the alarm grade for [6-A] system message. 2. Parameters Input data FK: Fault Message Kind (0-7, 10-17, 20-27, 30-37) FI: Fault Message Index (A-Z) LMP: Fault Message Lamp Data (0-3) 0=Lamp OFF 1=SUP Lamp ON 2=MN Lamp ON 3=MJ Lamp ON GRD: Printout Grade (0-3) TYPE: Listup Type (1-3) 1=All Data 2=Changed Data 3=Default Data SYSM GRD: System Message Output Grade 0=All Messages 1=Not Used 2=MN/MJ Grade Massages 3=MJ Grade Massages