Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual

							DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Connecting and Handling Fiber Optic Cables 
B-5 Optical Cross-Connect Hardware 
B
10A Lightguide Connector Panel
The 10A Lig htg uid e Connec tor Panel (c omc od e 104141858) mounts in the 
c utouts of a 100A Lig htg uid e Interc onnec t Unit (LIU). A Lightg uide Interc onnec t 
Unit (LIU) c ontains two c onnec tor p anels. Eac h c onnec tor p anel c an hold  six 
C2000A-2 Connec tor Coup ling s. 
The C2000A-2 Connec tor Coup ling  (c omc od e 104148028) is used  to join 
multi-mod e fib er op tic  c ab les eq uipp ed  with ST c onnec tors. It has a thread ed  
mid sec tion that allows it to b e sc rewed into the 10A Lig htg uid e Connec tor Panel.
The C3000A-2 Connec tor Coup ling  (c omc od e 105271142) is used  to join 
sing le-mod e fib er op tic  c ab les eq uip p ed  with ST c onnec tors. It has a thread ed  
mid sec tion that allows it to b e sc rewed into the 10A Lig htg uid e Connec tor Panel.
Lightguide Troughs
Two typ es of troug hs are used  with op tic al c ross-c onnec t hard ware. The 1A4 
troug h sec ures single fib er op tic  jumpers routed  b etween Lig htg uid e 
Interc onnec t Unit (LIU) c olumns, and  the 1A6 trough is used  at the b ottom of a 
Lightg uid e Interc onnec t Unit (LIU) c olumn to p revent c ab le slac k.
Ordering Information
Description Comcode
1A4 Lig htg uid e Troug h 104141866
1A6 Lig htg uid e Troug h 104141874 
						

							DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Connecting and Handling Fiber Optic Cables 
B-6 Optical Cross-Connect Hardware 
B
Multi-mode Fiber Cable
The multi-mod e fib er interc onnec tion c ables are used  as patc h c ords and  to 
c onnec t fiber op tic  eq uip ment to lig htg uid e c ross-c onnec t and  interc onnec t 
field s. This is a d ual fiber c ab le eq uip p ed  with ST c onnec tor p lug s on eac h end .
Ta b l e  B - 1
 p rovid es the availab le c ab le leng ths and  assoc iated c omc od e 
numb ers.
Table B-1. Multi-mode Fiber Cable Ordering Information
Description Length Comcode
Fiber Interc onnec tion Cab le 20 Feet (6.1 m) 407439975
Fiber Interc onnec tion Cab le 25 Feet (7.62 m) 407441427
Fiber Interc onnec tion Cab le 30 Feet (9.14 m) 407441435
Fiber Interc onnec tion Cab le 35 Feet (10.67 m) 407441443
Fiber Interc onnec tion Cab le 40 Feet (12.2 m) 407441450
Fiber Interc onnec tion Cab le 50 Feet (15.2 m) 407441468
Fiber Interc onnec tion Cab le 75 Feet (22.8 m) 407441476
Fiber Interc onnec tion Cab le 100 Feet (30.48 m) 407441484
Fiber Interc onnec tion Cab le 125 Feet (38.1 m) 407441492
Fiber Interc onnec tion Cab le 150 Feet (45.7 m) 407441500
Fiber Interc onnec tion Cab le 175 Feet (53.3 m) 407441518
Fiber Interc onnec tion Cab le 200 Feet (61 m) 407441666 
						

							DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Connecting and Handling Fiber Optic Cables 
B-7 Optical Cross-Connect Hardware 
B
Single-mode Fiber Cable
The sing le-mod e fib er interc onnec tion c ab les are used  as p atc h c ord s and  to 
c onnec t fiber op tic  eq uip ment to lig htg uid e c ross-c onnec t and  interc onnec t 
field s. This is a d ual fiber c ab le eq uip p ed  with ST c onnec tor p lug s on eac h end .
NOTE:
5 and  10d B attenuators are availab le. Contac t your Luc ent Tec hnolog ies 
rep resentative for more information.
Ta b l e  B - 2
 p rovid es the availab le c ab le leng ths and  assoc iated c omc od e 
numb ers.
Table B-2. Single-mode Fiber Cable Ordering Information
Description Length Comcode
Fiber Interc onnec tion Cab le 20 Feet (6.1 m) 407598325
Fiber Interc onnec tion Cab le 30 Feet (9.14 m) 407598333
Fiber Interc onnec tion Cab le 40 Feet (12.2 m) 407598341
Fiber Interc onnec tion Cab le 50 Feet (15.2 m) 407598358
Fiber Interc onnec tion Cab le 75 Feet (22.8 m) 407598366
Fiber Interc onnec tion Cab le 100 Feet (30.48 m) 407598374
Fiber Interc onnec tion Cab le 125 Feet (38.1 m) 407598390
Fiber Interc onnec tion Cab le 150 Feet (45.7 m) 407598408 
						

							DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Connecting and Handling Fiber Optic Cables 
B-8 Labels for Fiber Optic Cables 
B
Labels for Fiber Optic Cables
There are two typ es of lab els used  with fib er op tic  c ab les:
nCable labels
nCross-c onnec t lab els
Cab le lab els are used  on the c ab les and  c ross-c onnec t lab els are used  on the 
c ross-c onnec t eq uip ment.
Cable Labels
Cab le lab els, with ad hesive b ac king , are installed  on eac h end  of a fib er op tic  
c ab le. Eac h lab el d isp lays the following  information:
nThe numb ers of the c ab inets, c arriers, and  slots c onnec ted  b y the c ab le
nInformation on the c ab le itself, suc h as c ab le c omc od e numb er, and  how 
it is used
Cross-Connect Labels
The lab el used  with c ross-c onnec t fib er op tic  c ab les shows the c ab inet, c arrier 
and  slot numb ers of the sourc e of the c ab le. It also ind ic ates that the c ab le g oes 
to the Main Distrib ution Frame (MDF).
Cleaning Fiber Optic Cables
The use of isop rop yl alc ohol is rec ommend ed  to p rop erly c lean fiber op tic  
c ab les. Contac t your Luc ent Tec hnolog ies rep resentative for more information.
1. Moisten a lint-free c loth with isop rop yl alc ohol.
2. Wip e the c eramic  ferrule with the c loth. Be sure to wip e the entire leng th of 
the ferrule and the ferrule tip .
3. Dry the ferrule with air.
4. If the c onnec tor is not being used  immediately, c over the c onnec tor with 
the dust cap. 
						

							Connector and Cable Diagrams 
C-1  
C
DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
C
Connector and Cable Diagrams
This c hapter p rovid es c onnec tor and  c ab le d iag rams for the DEFINITY 
Enterp rise Communic ations Server.
For c irc uit p ac k and  auxiliary eq uip ment c lassific ations; and  for auxiliary 
eq uip ment lead  d esig nations, refer to the tab les at the end  of Chap ter 5, ‘‘Install 
and  Wire Telep hones and  Other Eq uip ment’’.
See Fig ure C-1
 for Exp ansion Interfac e to Exp ansion Interfac e fib er interc onnec t. 
						

							DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Connector and Cable Diagrams 
C-2  
C
Figure C-1. Expansion Interface to Expansion Interface Fiber (Part 1)
+5V
+5V
GRD
XMT_DAT
GRD
GRD
TA *
TL*
GRD
GRD
GRD
RCV_DAT
+5V
+5V 002
102
003
103
004
104
005
105
006
106
007
107
008
108(P1) 1
(P1) 26
(P1) 2
(P1) 27
(P1) 3
(P1) 28
(P1) 4
(P1) 29
(P1) 5
(P1) 30
(P1) 6
(P1) 31
(P1) 7
(P1) 329823A/B(P1) 1
(P1) 26
(P1) 2
(P1) 27
(P1) 3
(P1) 28
(P1) 4
(P1) 29
(P1) 5
(P1) 30
(P1) 6
(P1) 31
(P1) 7
(P1) 329823A/B
EIEI FS 1 -EI to EI fiber & 9823A/B
Fiber
Fiber
+5V
+5V
GRD
XMT_DAT
GRD
GRD
TA *
TL*
GRD
GRD
GRD
RCV_DAT
+5V
+5V002
102
003
103
004
104
005
105
006
106
007
107
008
108 Fr on t
FrontFro nt
Front Rear
RearRear
Rear Backplane
BackplaneBackplane
Backplane
Fro ntFront
RearRear BackplaneBackplane
+5V
+5V
GRD
GRD
GRD
TA *
TL*
GRD
GRD
GRD
+5V
+5V
XMT_DAT
RCV_DAT +5V
+5V
GRD
GRD
GRD
TA *
TL*
GRD
GRD
GRD
+5V
+5V002
102
003
004
104
005
105
006
106
007
008
108
103
107 000
100
001
002
102
003
103
004
104
005
006
106
101
105(J2) 1
(J2) 26
(J2) 2
(J2) 3
(J2) 28
(J2) 4
(J2) 29
(J2) 5
(J2) 30
(J2) 6
(J2) 7
(J2) 32
(J2) 27
(J2) 31 (J1) 1
(J1) 26
(J1) 2
(J1) 3
(J1) 28
(J1) 4
(J1) 29
(J1) 5
(J1) 30
(J1) 6
(J1) 7
(J1) 32
(J1) 27
(J1) 31
SNIEI FS 3 -SNI to EI metallic fiber H600-278
+5V
+5V
GRD
GRD
GRD
TA *
TL*
GRD
GRD
GRD
+5V
+5V
XMT_DAT
RCV_DAT
+5V
+5V
GRD
XMT_DAT
GRD
GRD
TA *
TL*
GRD
GRD
GRD
RCV_DAT
+5V
+5V 002
102
003
103
004
104
005
105
006
106
007
107
008
108(P1) 1
(P1) 26
(P1) 2
(P1) 27
(P1) 3
(P1) 28
(P1) 4
(P1) 29
(P1) 5
(P1) 30
(P1) 6
(P1) 31
(P1) 7
(P1) 329823A/B(P1) 1
(P1) 26
(P1) 2
(P1) 27
(P1) 3
(P1) 28
(P1) 4
(P1) 29
(P1) 5
(P1) 30
(P1) 6
(P1) 31
(P1) 7
(P1) 329823A/B
SNIEI FS 2 -SNI to EI fiber & 9823A/B+5V
+5V
GRD
XMT_DAT
GRD
GRD
TA *
TL*
GRD
GRD
GRD
RCV_DAT
+5V
+5V000
100
001
101
002
102
003
103
004
104
005
105
006
106
r975bb1a MMR 051096 
						

							DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Connector and Cable Diagrams 
C-3  
C
Figure C-2. Expansion Interface to Expansion Interface Fiber (Part 2)
Fro ntFron t
RearRear BackplaneBackplane
Fro ntFron t
RearRear BackplaneBackplane
+5V
+5V
GRD
XMT_DAT
GRD
GRD
TA *
TL*
GRD
GRD
GRD
RCV_DAT
+5V
+5V(P1) 1
(P1) 26
(P1) 2
(P1) 27
(P1) 3
(P1) 28
(P1) 4
(P1) 29
(P1) 5
(P1) 30
(P1) 6
(P1) 31
(P1) 7
(P1) 329823A/B(P1) 1
(P1) 26
(P1) 2
(P1) 27
(P1) 3
(P1) 28
(P1) 4
(P1) 29
(P1) 5
(P1) 30
(P1) 6
(P1) 31
(P1) 7
(P1) 329823A/B
SNISNI FS 5 -SNI to SNI fiber & 9823A/B
Fiber
+5V
+5V
GRD
XMY_DAT
GRD
GRD
TA *
TL*
GRD
GRD
GRD
RCV_DAT
+5V
+5V000
100
001
101
002
102
003
103
004
104
005
105
006
106000
100
001
101
002
102
003
103
004
104
005
105
006
106
+5V
+5V
GRD
GRD
GRD
TA *
TL*
GRD
GRD
GRD
+5V
+5V
XMT_DAT
RCV_DAT +5V
+5V
GRD
GRD
GRD
TA *
TL*
GRD
GRD
GRD
+5V
+5V002
102
003
004
104
005
105
006
106
007
008
108
103
107 002
102
003
004
104
005
105
006
106
007
008
108
103
107(J2) 1
(J2) 26
(J2) 2
(J2) 3
(J2) 28
(J2) 4
(J2) 29
(J2) 5
(J2) 30
(J2) 6
(J2) 7
(J2) 32
(J2) 27
(J2) 31 (J1) 1
(J1) 26
(J1) 2
(J1) 3
(J1) 28
(J1) 4
(J1) 29
(J1) 5
(J1) 30
(J1) 6
(J1) 7
(J1) 32
(J1) 27
(J1) 31
EIEI FS 4 -EI to EI metallic fiber H600-278
+5V
+5V
GRD
GRD
GRD
TA *
TL*
GRD
GRD
GRD
+5V
+5V
XMT_DAT
RCV_DAT
r975bb1b MMR 051096 
						

							DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Connector and Cable Diagrams 
C-4  
C
Figure C-3. Sample Cross-Connects
103A
information outlet
T(red)
R (green)
C1 (yellow)
C2 (black)T
R
Modular
cord
C1
C2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
2526
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
501
2
3
4
5
6
7
8
9
10
11
12
G1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
2526
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK
BLANK1
2
3
4
5
6
7
8
Pinouts
TN553 (12 ports) TN726 (8 ports)
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
GRD
GSP0/2
LOA*
LIA
GSP1/3
LOB*
LIB
GSP3*
LOC*
LIC
RSS0*
LOD*
LID
CPERXD
PTD*
RES FLT*
CHG RT*
PSSG
+5E
GRDE
GRDE
TA *
GRDE
GRDE
+5EGRD
GSP0*
LOA
LIA*
GSP1*
LOB
LIB*
GSP2*
LOC
LIC*
RSS1*
LOD
LID*
CPETXD
BAT DISC*
ON RES*
ENVB*
PSS
+5E
RCV DAT*
GRDE
TL*
GRDE
XMT DAT*
+5E50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
TN1654 Amphenol
pinouts
1
226
27
2
327
28
Example cross connect
Amphenol pinouts
TN553
TN762B
123456789101112
123456789101112
110 blockOne port One port
(TN553)
110 block(TN726B) Etc.
(48)LOA
(23)LOA*
(22)LIA
(47)LIA*
(45)LOB
(20)LOB*
(19)LIB
(44)LIB*
(42)LOC
(17)LOC*
(16)LIC
(41)LIC*
(39)LOD
(14)LOD*
(13)LID
(38)LID* (48)LOA
(23)LOA*
(22)LIA
(47)LIA*
(45)LOB
(20)LOB*
(19)LIB
(44)LIB*
(42)LOC
(17)LOC*
(16)LIC
(41)LIC*
(39)LOD
(14)LOD*
(13)LID
(38)LID*
TN1654 to TN1654
direct cross connect
r975bb2 MMR 051396 
						

							DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Connector and Cable Diagrams 
C-5  
C
Figure C-4. Sample Cable Pinouts 
						

							DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Connector and Cable Diagrams 
C-6  
C
Figure C-5. Sample Pinouts