Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual
Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 About This Book xi How to Comment on This Document How to Comment on This Document Luc ent Tec hnolog ies welc omes your feedb ac k. Please fill out the read er c omment c ard found at the front of this manual and return it. Your c omments are of g reat value and help imp rove our d oc umentation. If the reader c omment c ard is missing , FAX your c omments to 1-303-538-1741 or to your Luc ent Tec hnolog ies rep resentative, and mention this d oc ument’s name and number, DEFINITY Enterp rise Communic ation Server Release 8 Installation and Test for Sing le-Carrier Cab inets . Trademarks This d oc ument c ontains referenc es to the following Luc ent Tec hnolog ies trad emarked prod uc ts: nACCUNET® nAUDIX® nCallmaster® nCallVisor® nC O N VERSA N T® nDEFINITY® nFO RU M™ nMEGACOM® nSYSTI M A X® nTRA N STA L K™ The following prod uc ts are trad emarked b y their ap p rop riate vend or: nAud ic hron® is a reg istered trad emark of Aud ic hron Comp any. nLINX™ is a trad emark of Illinois Tool Works, Inc . nMusic Mate® is a reg istered trad emark of Harris Corp oration. nPa g e Pa c® is a reg istered trademark of Harris Corp oration, Drac on Division. nPORTA™ Systems is a trad emark of PORTA Systems Corp oration. nShoc kwatc h® is a reg istered trad emark of Med ia Rec overy, Inc orp orated . nStyrofoam® is a reg istered trad emark of Styrofoam Corp oration. nTi l t w a t c h® is a reg istered trad emark of Med ia Rec overy, Inc orp orated . nZone Mate® is a reg istered trad emark of Harris Corp oration.
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 About This Book xii Standards Compliance Standards Compliance The eq uip ment p resented in this doc ument c omp lies with the following stand ard s (as ap p rop riate): nITU-T (Formerly CCITT) nEC M A nETSI nIPNS nDPNSS nNational ISDN-1 nNational ISDN-2 nISO-9000 nANSI nFCC Part 15 nEN55022 nEN50081 nEN50082 nC I SPR2 2 nAustralia AS3548 (AS/NZ3548) nAustralia AS3260 nIEC 825 nIEC 950 nUL 1459 nUL 1950 nCSA C222 Number 225 nTS0 0 1
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 About This Book xiii LASER Product LASER Product The DEFINITY ECS may c ontain a Class 1 LASER devic e if sing le-mod e fib er op tic c ab le is c onnec ted to a remote Exp ansion Port Network (EPN). The LASER d evic e op erates within the following p arameters: Maximum Power Outp ut: -5 d Bm Waveleng th: 1310 nm Mod e Field Diameter: 8.8 mic rons CLASS 1 LASER PRODUCT IEC 825 1993 !CAUTION: Use of c ontrols or ad justments or p erformanc e of p roc ed ures other than those sp ec ified herein may result in hazard ous rad iation exp osure. Contac t your Luc ent Tec hnolog ies rep resentative for more information. Electromagnetic Compatibility Standards This p rod uc t c omp lies with and c onforms to the following EMC stand ard s (as ap p rop riate): nLimits and Methods of Measurements of Rad io Interferenc e Charac teristic s of Information Tec hnolog y Eq uipment, EN55022 (CISPR22), 1993 nEN50082-1, Europ ean Generic Immunity Standard nFCC Parts 15 and 68 nAustralia AS3548 NOTE: The system c onforms to Class A (ind ustrial) eq uip ment. Voic e terminals meet Class B requirements. nElec trostatic Disc harg e (ESD) IEC 1000-4-2 nRad iated rad io freq uenc y field IEC 1000-4-3 nElec tric al Fast Transient IEC 1000-4-4 nLightning effec ts IEC 1000-4-5 nConduc ted radio freq uenc y IEC 1000-4-6 nMains freq uenc y mag netic field IEC 1000-4-8 nLow freq uenc y mains d isturb anc e IEC 1000-4-11
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 About This Book xiv Security Issues European Union Standards Luc ent Tec hnolog ies Business Communic ations Systems d ec lares that the DEFINITY eq uip ment sp ec ified in this d oc ument b earing the “ CE” mark c onforms to the Europ ean Union Elec tromag netic Compatib ility Direc tives. The “ CE” (Conformité Europ eénne) mark ind ic ates c onformanc e to the Europ ean Union Elec tromag netic Comp atib ility Direc tive (89/336/EEC) Low Voltag e Direc tive (73/23/EEC) and Telec ommunic ation Terminal Eq uip ment (TTE). Direc tive (91/263/EEC) and with i-CTR3 Basic Rate Interfac e (BRI) and i-CTR4 Primary Rate Interfac e (PRI) as ap p lic able. The “ CE” mark is ap plied to the following Release 8 prod uc ts: nGlob al AC p owered Multi-Carrier Cab inet (MCC) nDC p owered Multi-Carrier Cab inet (MCC) with 25 Hz ring g enerator nAC p owered Single-Carrier Cab inet (SCC) with 25 Hz ring g enerator nAC p owered Comp ac t Sing le-Carrier Cab inet (CSCC) with 25 Hz ring g enerator nEnhanc ed DC Power System Security Issues To ensure the c ustomer of the g reatest sec urity p ossib le, Luc ent Tec hnologies offers servic es that c an red uc e toll fraud liab ilities. Contac t your Luc ent Tec hnolog ies rep resentative for more sec urity information. Log in sec urity is an attrib ute of the DEFINITY Enterp rise Communic ations Server (ECS) software. Ad vise c ustomers that their existing p assword s exp ire 24 hours after the up g rad e. Also exp lain that the new p assword s must c onform to stric t req uirements.
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 About This Book xv Where to Call for Technical Support Where to Call for Technical Support Use the following telep hone numb ers for the reg ion in whic h the system is b eing installed : Antistatic Protection !CAUTION: When hand ling c irc uit pac ks or any c omp onents of a DEFINITY System, always wear an authorized wrist g round strap . Connec t the strap to an ap p roved g round suc h as an unp ainted metal surfac e on the DEFINITY Sys t e m . Te l e p h o n e N u m b e r DEFINITY Help line (feature ad ministration and system applications)1-800-225-7585 Luc ent Tec hnolog ies Toll Fraud Intervention 1-800-643-2353 Luc ent Tec hnolog ies National Customer Care Center 1-800-242-2121 Luc ent Tec hnolog ies Corp orate Sec urity 1-800-822-9009 Streamlined Imp lementation (for missing eq uip ment) 1-800-772-5409 USA/Canada Tec hnic al Servic e Center 1-800-248-1234 ITAC 1-303-804-3777 Luc ent Tec hnolog ies Centers of Exc ellenc e Asia/Pac ific Reg ional Sup p ort Center 65-872-8686 Western Europ e/Mid d le East/South Afric a 44-1252-77-4800 Central/Eastern Europ e 361-345-4334 Central/Latin Americ a Carib b ean 1-303-804-3778 Australia 61-2-9352-9090 North Americ a (INADS Datab ase Ad ministration) 1-800-248-1111
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 About This Book xvi Remove/Install Circuit Packs Remove/Install Circuit Packs !CAUTION: The control circuit packs with white lab els cannot be removed or installed when the power is on. The p ort c irc uit pac ks with g ray lab els (older version circuit packs had purple labels) can be removed or installed when the p ower is on. Federal Communications Commission Statement Part 68: Statement Part 68: Answer-Sup ervision Sig naling . Allowing this eq uip ment to b e op erated in a manner that d oes not p rovid e p rop er answer-sup ervision sig naling is in violation of Part 68 rules. This equip ment returns answer-sup ervision sig nals to the p ub lic switc hed network when: nAnswered b y the c alled station nAnswered b y the attend ant nRouted to a rec ord ed announc ement that c an b e ad ministered b y the CPE user This eq uip ment returns answer-sup ervision sig nals on all DID c alls forward ed b ac k to the p ub lic switc hed telep hone network. Permissib le exc eptions are: nA c all is unanswered nA b usy tone is rec eived nA reorder tone is rec eived Luc ent Tec hnolog ies attests that this reg istered eq uipment is c ap ab le of p rovid ing users ac c ess to interstate p rovid ers of op erator servic es throug h the use of ac c ess c od es. Modific ation of this eq uip ment b y c all ag g reg ators to b loc k ac c ess d ialing c od es is a violation of the Telep hone Op erator Consumers Ac t of 1990. This eq uip ment c omp lies with Part 68 of the FCC Rules. On the rear of this eq uip ment is a lab el that c ontains, among other information, the FCC reg istration numb er and ring er eq uivalenc e numb er (REN) for this eq uip ment. If req uested , this information must b e p rovid ed to the telep hone c omp any.
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 About This Book xvii Federal Communications Commission Statement The REN is used to d etermine the q uantity of d evic es whic h may b e c onnec ted to the telep hone line. Exc essive RENs on the telep hone line may result in d evic es not ring ing in resp onse to an inc oming c all. In most, b ut not all areas, the sum of RENs should not exc eed 5.0. To be c ertain of the numb er of d evic es that may b e c onnec ted to a line, as d etermined b y the total RENs, c ontac t the loc al telep hone c omp any. NOTE: REN is not req uired for some typ es of analog or d ig ital fac ilities. Means of Connection Connec tion of this equip ment to the telep hone network is shown in the following tab le. If the terminal eq uip ment (DEFINITY ® System) c auses harm to the telep hone network, the telep hone c omp any will notify you in ad vanc e that temp orary d isc ontinuanc e of servic e may b e req uired . But if ad vanc e notic e is not prac tic al, the telep hone c omp any will notify the c ustomer as soon as p ossib le. Also, you will be ad vised of your rig ht to file a c omp laint with the FCC if you b elieve it is nec essary. The telep hone c omp any may make c hang es in its fac ilities, eq uip ment, op erations or proc ed ures that c ould affec t the op eration of the equip ment. If this happens, the telephone c ompany will provide advance notice in order for you to make nec essary mod ific ations to maintain uninterrup ted servic e. If troub le is exp erienc ed with this eq uip ment, for rep air or warranty information, p lease c ontac t the Tec hnic al Servic e Center at 1-800-248-1234. If the eq uip ment is c ausing harm to the telep hone network, the telep hone c omp any may req uest that you d isc onnec t the eq uip ment until the p rob lem is resolved .Manufacturer ’s Port Identifier FIC CodeSOC/REN/ A.S. Code Network Jacks Off/On Premises Station OL13C 9.0F RJ2GX, RJ 2 1 X, RJ 1 1 C DID Trunk 02RV2-T 0.0B RJ2GX, RJ21X CO Trunk 02GS2 0.3A RJ21X CO Trunk 02LS2 0.3A RJ21X Tie Trunk TL31M 9.0F RJ2GX 1.544 Dig ital Interfac e 04DU9-B,C 6.0P RJ48C, RJ48M 1.544 Dig ital Interfac e 04DU9-BN,KN 6.0P RJ48C, RJ48M 120A2 Channel Servic e Unit 04DU9-DN 6.0P RJ48C
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 About This Book xviii Federal Communications Commission Statement It is rec ommend ed that rep airs b e performed b y Luc ent Tec hnolog ies c ertified tec hnic ians. The eq uip ment c annot b e used on p ublic c oin p hone servic e p rovid ed b y the telep hone c omp any. Connec tion to p arty line servic e is sub jec t to state tariffs. Contac t the state p ub lic utility c ommission, p ub lic servic e c ommission or corporation commission for information. This eq uip ment, if it uses a telep hone rec eiver, is hearing aid c omp atib le.
Install and Connect the Cabinets 1-1 Check Circuit Packs 1 DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 1 Install and Connect the Cabinets This chapter describes how to install the Release 8si Single-Carrier Cabinets. Multic arrier Cab inet installation p roc ed ures are p rovid ed in DEFINITY Enterp rise Communic ations Server Release 8 Installation and Test for Multic arrier Cab inets . Floor p lans and eq uip ment layouts for typic al system installations are p rovid ed in DEFINITY Enterp rise Communic ations Server Release 8 System Desc rip tion. Check Circuit Packs Ensure all c irc uit pac ks are fully inserted into the prop er slots ac c ord ing to the Customer Servic e Doc ument (CSD). Rep ort any d isc rep anc ies in c irc uit p ac k type or q uantity to your Luc ent Tec hnologies rep resentative. For d etailed c irc uit pack descriptions, refer to DEFINITY Enterp rise Communic ations Server Release 8 System Desc rip tion . Release 8si systems c ontain a RISC-b ased TN790B Proc essor c irc uit p ac k. Check Customer’s Order Chec k the c ustomer’s order and the ship ping p ac king lists to c onfirm all eq uip ment is p resent. If any eq uip ment is missing , report the information to your Luc ent Tec hnolog ies rep resentative. Chec k the system ad junc ts for d amag e and rep ort all damag e ac c ord ing to loc al ship p ing instruc tions.
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Connect the Cabinets 1-2 How to Correct Shipping Errors 1 How to Correct Shipping Errors Defec tive eq uip ment and over-ship p ed eq uip ment must b e red -tag g ed and returned p er the nearest Material Stoc king Loc ation (MSL) instruc tions. Short-ship p ed reports must also b e d irec ted to the nearest Material Stoc king Loc ation (MSL). Contac t the ap p rop riate loc ation for sp ec ific instruc tions. For Streamlined Imp lementation in the United States, c all 1-800-772-5409. Unpack and Inspect 1. Unp ac k the c ab inets from the ship ping material and insp ec t for d amag e. Report any shipping damage according to local shipping instructions. 2. Open and remove the front door and rear p anels from the c ab inet. 3. Verify the lab el near the c irc uit b reaker on the p ower sup p ly toward the rear of eac h c ab inet c orresp onds to the loc al voltag e typ e. !DANGER: If the lab el is d ifferent than the voltag e typ e at the site, notify your Luc ent Tec hnolog ies rep resentative immed iately for a rep lac ement power supply. Do not , und er any c irc umstanc es, c onnec t an inc orrec t p ower supp ly to a p ower sourc e. Install Single-Carrier Cabinets This sec tion d esc rib es how to p osition and stac k the c ab inets for all reliab ility configurations. !CAUTION: Lifting the c ab inet may req uire two p eop le, as it may weig h as muc h as 130 p ounds (60 kilog rams). Use c aution to avoid injury. Before b eginning the c ab inet installation, c hec k the loc ation of the AC/DC p ower receptacle. The receptacle must be on a separately fused circuit not controlled b y a wall switc h. It must b e loc ated within 10 feet (3 meters) of the c ab inet, and should b e loc ated outsid e the Main Distrib ution Frame (MDF) area.