Kyocera TASKalfa 552ci User Manual

							Copying Functions
4-29
4
EcoPrint
Use EcoPrint to save toner when printing. Use this function for test copies or any other occasion where high 
quality print is unnecessary.
The procedure for making copies using EcoPrint is explained below.
1Press the Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then [EcoPrint].
4Press [On].
5Press [OK].
6Press the Start key to start copying.
Single Color Copy
Specify one of Cyan, Magenta, Yellow, Red, Green, or Blue, and produce copies with that color regardless of 
original type.
Follow the steps as below for Single Color Copy.
1Press Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality], [Color Selection] and 
then press [Single Color].
4Select color for copying from [Cyan], [Magenta], 
[Yellow], [Red], [Green] or [Blue].
5Press [OK].
6Press the Start key. Copying begins.
Status
Ready to copy.Copies
Cancel OK EcoPrint
On Conserve toner when printing.
Use EcoPrint for test copies
and other situations where high-quality
copies are not necessary.
Off
Add Shortcut
10/10/2008    10:10
:
:
: Original
Zoom
Paper---
--- 100%
Preview Place original.
Color Selection
Ready to copy.Copies1
Status10/10/2008    10:10Cancel OK Add ShortcutAuto Color
Preview Original
Zoom
Paper100%
--- :
:
:--- Place original.
Single Color Black &
White Full Color
CyanYellow Magenta
Red BlueGreen Single Color
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions
4-30
Color Balance Adjust
Adjust the strength of cyan, magenta, yellow, and black to make fine hue adjustments.
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see page 3-8).
This feature can not be used together with One touch Image Adjust (see page 4-33).
Refer to the sample image in Quick Guide to Adjusting Image Quality.
Follow the steps below to adjust color balance.
1Press Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then press [Color 
Balance].
4Press [On].
5Press [ ] or [ ] on each side of the color to be 
adjusted (Cyan, Magenta, Yellow, Black) to adjust 
each color.
6Press [OK].
7Press the Start key. Copying begins.
Color Balance
Ready to copy.Copies
Status10/10/2008    10:10Cancel OK Add ShortcutOff
Preview Original
Zoom
Paper100%
--- :
:
:---OnCyan
Magenta
Yellow
Black-5 -1-2 -3 -4 54 3 2 1 0
-5 -1-2 -3 -4 54 3 2 1 0
-5 -1-2 -3 -4 54 3 2 1 0
-5 -1-2 -3 -4 54 3 2 1 0 Place original.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions
4-31
4
Hue Adjustment
Adjust the color (hue) of images. Make adjustments such as adjusting red to a strong yellow-red or yellow to a 
strong green-yellow to make more creative copies.
The items that may be configured are as follows.
•All: Adjust hue for all colors.
•Yellow - Green & Blue - Magenta: Adjust color
balance for yellow and green, and blue and magenta.
•Green - Cyan & Magenta - Red: Adjust color balance
for green and cyan, and magenta and red.
•Cyan - Blue & Red - Yellow: Adjust color balance 
for cyan and blue, and red and yellow.
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting 
Density (see page 3-8).
This feature can not be used together with One touch 
Image Adjust mode (see page 4-33).
These adjustments are especially useful on rich color 
images.
Follow the steps below to use image hue adjustment.
1Press Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then press [Hue 
Adjustment].
4Select the item for which the hue is to be adjusted 
and then press [ ] or [ ] to make the adjustment.
Yellow
Green
Blue Red
Magenta Cyan
Hue Adjustment
Ready to copy.Copies
Status10/10/2008    10:10Cancel OK Add ShortcutOff
Preview Original
Zoom
Paper100%
--- :
:
:--- Place original.
Green - Cyan
& Magenta - Red Yellow - Green
& Blue - Magenta All
Cyan - Blue
& Red - YellowGreen Red
Cyan
Blue Adjust hue for all colors.
Yellow
Magenta
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions
4-32Example 1
Select [Yellow - Green & Blue - Magenta], and 
press [ ] to adjust yellow closer to green, and blue 
closer to magenta.
Example 2
Select [Cyan - Blue & Red - Yellow], and press [ ] 
to adjust yellow closer to red , and blue closer to 
cyan.
5Press [OK].
6Press the Start key. Copying begins.
Yellow
Green
Blue Red
Magenta Cyan
Yellow
Green
Blue Red
Magenta Cyan
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions
4-33
4
One-touch Image Adjust
Adjust images as desired to more vivid or more dull images.
The items that may be configured are as follows: Vivid, Dull, Sharp, Smooth, Light, Dark
Refer to the sample image in Quick Guide to Adjusting Image Quality for examples of the effect of each setting.
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see page 3-8).
This feature can not be used together with Color Balance Adjust (see page 4-30).
Select from one of the 6 available One Touch Image Adjust types. Multiple selections are not possible.
Follow the steps below to use One-touch Image Adjust.
1Press Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then press [One-
touch Image Adjust].
4Select the image.
5Press [OK].
6Press the Start key. Copying begins.
One-touch Image Adjust
Ready to copy.Copies
Status10/10/2008    10:10Cancel OK Add ShortcutAdjust images as desired.
Preview Original
Zoom
Paper100%
--- :
:
:---Off
Vivid
SmoothDull Sharp
Light Dark Place original.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions
4-34
Sharpness Adjust
Adjust the sharpness of image outlines. When copying penciled originals with rough or broken lines, clear copies 
can be taken by adjusting sharpness toward [Sharpen]. When copying images made up of patterned dots such 
as magazine photos, in which moire
* patterns appear, edge softening and weakening of the moire effect can be 
obtained by setting the sharpness toward [Unsharpen].
* Patterns that are created by irregular distribution of halftone dots.
Refer to the sample image in Quick Guide to Adjusting Image Quality.
Follow the steps below to adjust sharpness.
1Press Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then Press 
[Sharpness].
4Press [-3] to [3] (Unsharpen - Sharpen) to adjust 
the sharpness.
5Press [OK].
6Press the Start key. Copying begins.
Sharpness
Ready to copy.Copies
Status10/10/2008    10:10Cancel OK Add Shortcut Preview Original
Zoom
Paper100%
--- :
:
:---Sharpen Unsharpen
0+1 +2 +3 -1 -2 -3 Place original.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions
4-35
4
Background Density Adjust
Lightens the background of color originals with dark 
backgrounds.
NOTE: This feature is used with full color and auto 
color copying. Background Density Adjust is disabled 
during auto color copying when the a black & white 
original has been detected.
Follow the steps below to use background density adjust.
1Press Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then press 
[Background Density Adj.].
4Press [On].
5Press [1] to [5] (Lighter - Darker)  to  adjust the 
background color intensity.
6Press [OK].
7Press the Start key. Copying begins.
Original Copy 
Background Density Adj.
Ready to copy.Copies
Status10/10/2008    10:10Cancel OK Add Shortcut Preview Original
Zoom
Paper100%
--- :
:
:---On OffBackground
Lighter Darker
12345 Place original.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions
4-36
Continuous Scan
When a large number of originals cannot be placed in the document processor at one time, the originals can be 
scanned in separate batches and then copied as one job. With this function, originals are scanned until you 
press [Scan Finish].
Any of the following settings can be changed during scanning.
If you use Job Build, you can insert a blank paper during scanning or a blank page during duplex copying.
The procedure for making copies using Continuous Scan is explained below.
1Press the Copy key.
2Press [Advanced Setup] and then [Continuous 
Scan].
3If Continuous Scan is selected, press [On].
If Job Build is selected, press [Job Build] and select 
desired binding orientation.
4Press [OK].
5Place the originals in the document processor or on 
the platen and press the Start key.
If [Job Build] is selected, the next page can be 
changed. Press [Sheet Insertion] to insert a blank 
paper. Press [Next Copy: On Back] in duplex 
copying to print the next page on back page.
6Place the next original and press the Start key. 
Repeat these steps to scan the remaining originals.
After scanning all originals, press [Finish Scan] to 
start copying. • Original size selection • Zoom
• Original orientation • Border erase
• Image quality selection • Density
• Type of original (2-sided/book original) • Color Selection
Status10/10/2008    10:10
Ready to copy.Copies
Cancel OK Continuous Scan
Add ShortcutJob Build On
Off
Select desired binding orientation.
Binding
RightBinding
Top Binding
Left
:
:
: Original
Zoom
Paper---
--- 100%
Preview Place original.
Status10/10/2008    10:10
Copies
Cancel Finish Scan Scanner Setting
Original
SizeOriginal
OrientationOriginal
Image
2-sided/Book
OriginalZoomBorder Erase
Density
1
Next Copy: On Front
Sheet
Insertion Next Copy:
On Back Finishing
pages Scan next original(s).
Place the originals and press Start key.
Press [Finish Scan] to start copying.
Job No.:   Job Name:   User Name:  000021
doc20080505113414 -----
1/2
:ˆ:‰
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions
4-37
4
Auto Image Rotation
Automatically rotates the image when the sizes of the original and the loaded paper matches but the orientations 
are different. The images will be rotated 90° counter-clockwise prior to copying.
NOTE: To set Auto Image Rotation as the default mode, refer to Auto Image Rotation on page 8-22.
The procedure for making copies using Auto Image Rotation is explained below.
1Press the Copy key.
2Place the originals on the platen.
3Press [Advanced Setup] and then [Auto Image 
Rotation].
4Press [On] to select Auto Image Rotation.
5Press [OK].
6Press the Start key to start copying.
Negative Image
Inverts black and white portions of the image for printing.
NOTE: This function is only available for black and white copy mode.
Use the procedure below to make negative image copies.
1Press the Copy key.
2Place the originals on the platen.
3Press [Advanced Setup] and then [Negative 
Image].
4Press [On] to select Negative Image.
5Press [OK].
6Press the Start key to start copying.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions
4-38
Mirror Image
Copies the mirrored image of the original.
NOTE: This function is only available for black and white copy mode.
Use the procedure below to make mirror image copies.
1Press the Copy key.
2Place the originals on the platen.
3Press [Advanced Setup] and then [Mirror Image].
4Press [On] to select Mirror Image.
5Press [OK].
6Press the Start key to start copying.
Downloaded From ManualsPrinter.com Manuals