Kyocera TASKalfa 552ci User Manual

							Basic Operation
3-29
3
8Check the destination list.
Select a destination and press [Detail/Edit] to check 
and edit it. Edit it, if necessary, referring to steps 3 
to 5.
Select a destination and press [Delete] to remove 
the destination from the list.
NOTE: When On is selected in FTP Encrypted TX 
(page 5-31), keys appear for selecting the encryption 
method for the FTP transmission destination. Select 
Auto, DES, 3DES or AES as the encryption method.
When selecting [On] for Entry Check for New 
Destination (page 8-31), the confirmation screen 
appears. Enter the same host name and path again, 
and press [OK].
When selecting [On] for Destination Check before Send 
(page 8-30), the confirmation screen appears after 
pressing the Start key. For details, refer to Confirmation 
Screen of Destinations on page 3-29.
Confirmation Screen of Destinations
When selecting [On] for Destination Check before Send (page 8-30), the confirmation screen of destinations 
appears after pressing the Start key.
Follow the steps below to confirm the destinations.
1Press [ ] or [ ] to confirm every destination.
Press [Detail] to display the detailed information on 
the selected destination.
To delete the destination, select the destination you 
want to delete and press [Delete]. Press [Yes] in the 
confirmation screen. The destination is deleted.
To add the destination, press [Cancel] and then 
return to the destination screen.
2Press [Check].
NOTE: Be sure to confirm every destination by 
displaying them on the touch panel. You cannot press 
[Check] unless you have confirmed every destination.
3Press the Start key to start sending.
Status08/08/2009    10:10
Original/Sending
Data Format Quick Setup Destination Color/
Image QualityAdvanced
Setup Destination Detail
ABCD
[email protected]
Book
Folder Path
Entry E-mail
Addr Entry
No.
 1/100
AAA BBB CCC DDDAuto
FFF GGG HHH III JJJ0004 0003 0005 0001 0002
0006 0007 0008 0009 0010
1/1
i-FAX
Addr Entry FAX No.
Entry
WSD Scan Place original.
Ready to send.Destination
TUVW
10.200.188.120
Group1Group1
EEE
Direct Delete Recall On Hook ChainDetail/Edit
To:
Check
Cancel
Status08/08/2009    10:10
Place original.Ready to send.Destination
Detail
Delete Destination Detail
A OFFICE 1234567890
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation
3-30
Specifying Destination
When specifying destination, choose from the Address Book or use the One Touch Keys.
NOTE: You can set the machine up so that the address book screen appears when you press the Send key. 
For details, refer to Setting the Default Send Screen on page 8-32.
Choosing from the Address Book
Select a destination registered in the Address Book.
1In the basic screen for sending, press [Address 
Book].
2Press the checkbox to select the desired 
destination from the list. You may choose multiple 
destinations. The selected destinations are 
indicated by a checkmark in the check box. To use 
an address book on the LDAP server, select [Ext 
Address Book] from the Addr Book pull-down 
menu.
You can change the order in which the destinations 
are listed by selecting [Name] or [No.] from the Sort 
pull-down menu.
NOTE: To cancel the selection, press the check box 
and remove the checkmark. For details on the external 
address book, refer to KYOCERA COMMAND 
CENTER Operation Guide.
3Press [OK] to register the selected destination in 
the destination list.
NOTE: To delete a destination in the list, select the 
destination and press [Delete].
Status08/08/2009    10:10
Original/Sending
Data Format Quick Setup Destination Color/
Image QualityAdvanced
Setup Destination Detail
ABCD
[email protected]
Book
Folder Path
Entry E-mail
Addr Entry
No.
 1/100
AAA BBB CCC DDDAuto
FFF GGG HHH III JJJ0004 0003 0005 0001 0002
0006 0007 0008 0009 0010
1/1
i-FAX
Addr Entry FAX No.
Entry
WSD Scan Place original.
Ready to send.Destination
TUVW
10.200.188.120
Group1Group1
EEE
Direct Delete Recall On Hook ChainDetail/Edit
To:
Status08/08/2009    10:10
Address Book
Cancel OKGroup
E-mail
Dest.
Search(Name)
Search(No.)
No. Type Name Detail
FolderDetail Address BookSort Addr Book
0001
0002
00050004 [email protected]
[email protected]
Group1
Group2
Group3Name
Register/Edit
Address Book
1/2
i-FAX FAX
ABC DEF JKL MNO PQRS TUV WXYZGHI 0-9
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation
3-31
3
Destination Search
Destinations registered in the Address Book can be searched.
 Advanced search by type or by initial letter is also available.
The procedures for using the different search modes are explained below.
Search by name
Press [Search(Name)] and enter the required name.
Search by address number
Press [Search(No.)] and enter the address number you wish to search.
Advanced search by initial letter
Press the key for the required initial letter.
Advanced search by destination
Press any of [E-mail], [Folder], [FAX], [i-FAX] or [Group]. The destinations registered by that type are displayed.
Status08/08/2009    10:10
Address Book
Cancel OKGroup
E-mail
Dest.
Search(Name)
Search(No.)
No. Type Name Detail
FolderDetail Address BookSort Addr Book
0001
0002
00050004 [email protected]
[email protected]
Group1
Group2
Group3Name
Register/Edit
Address Book
1/2
i-FAX FAX
ABC DEF JKL MNO PQRS TUV WXYZGHI 0-9
(1)
(2)
(3)
(4)
Keys 
usedSearch type Subjects searched
1 Search by name Search by registered name.
2 Search by address 
numberSearch by registered address number.
3 Advanced search 
by initial letterAdvanced search by initial letter of registered name.
4 Advanced search 
by destinationAdvanced search by type of registered destination 
(E-mail, Folder (SMB/FTP), FAX, i-FAX or Group). 
(FAX: Only when the optional fax kit is installed.i-FAX: 
Only when the optional internet fax kit is installed).
You can set this function up so that destination types 
are selected when the address book is displayed. 
For more information, refer to Narrow Down 
Settings on page 8-66.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation
3-32
Choosing by One Touch Key
Select the destination using the One Touch Keys.
In the basic screen for sending, press the One Touch 
Keys where the destination is registered.
NOTE: If the One Touch Keys for the desired 
destination is hidden on the touch panel, press [ ] or 
[ ] to scroll and view next or previous One Touch 
Keys.
This procedure assumes that One Touch Keys have 
already been registered.
Refer to Adding a Destination on One Touch Key on 
page 8-64 for more information on adding One Touch 
keys.
Choosing by Speed Dial
Access the destination by specifying the 4-digit (0001 to 
1000) One Touch Key number (speed dial).
In the basic screen for sending, press the Quick No. 
Search key or [No.] and use the numeric keys to enter 
the One Touch key number in the numeric entry 
screen.
NOTE: if you entered the speed dial in 1 to 3-digit, 
press [OK].
Sending to Different Types of Destinations (Multi Sending)
You can specify destinations that combine e-mail addresses, folders (SMB or FTP) and fax numbers (optional). 
This is referred to as Multi Sending. This is useful for sending to different types of destination (e-mail addresses, 
folders, etc.) in a single operation.
No. of broadcast items E-mail : Up to 100
Folders (SMP, FTP) : Total of 10 SMB and FTP
FAX : Up to 500
i-FAX : Up to 100
Also, depending on the settings, you can send and print at the same time.
Procedures are the same as used in specifying the destinations of respective types. Continue to enter E-mail 
address or folder path so that they appear in the destination list. Press the Start key to launch transmission to 
all destinations at one time.
Status08/08/2009    10:10
Original/Sending
Data Format Quick Setup Destination Color/
Image QualityAdvanced
Setup Destination Detail
ABCD
[email protected]
Book
Folder Path
Entry E-mail
Addr Entry
No.
 1/100
AAA BBB CCC DDDAuto
FFF GGG HHH III JJJ0004 0003 0005 0001 0002
0006 0007 0008 0009 0010
1/1
i-FAX
Addr Entry FAX No.
Entry
WSD Scan Place original.
Ready to send.Destination
TUVW
10.200.188.120
Group1Group1
EEE
Direct Delete Recall On Hook ChainDetail/Edit
To:
Status08/08/2009    10:10
Original/Sending
Data Format Quick Setup Destination Color/
Image QualityAdvanced
Setup Destination Detail
ABCD
[email protected]
Book
Folder Path
Entry E-mail
Addr Entry
No.
 1/100
AAA BBB CCC DDDAuto
FFF GGG HHH III JJJ0004 0003 0005 0001 0002
0006 0007 0008 0009 0010
1/1
i-FAX
Addr Entry FAX No.
Entry
WSD Scan Place original.
Ready to send.Destination
TUVW
10.200.188.120
Group1Group1
EEE
Direct Delete Recall On Hook ChainDetail/Edit
To:
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation
3-33
3
Using Document Box
What is Document Box?
Document Box is an area in the hard disk in which you can save documents for later retrieval or sharing among 
multiple users.
Document Box contains four types of component boxes which provide the following functions.
Custom Box...page 6-2
Custom Box is a component box which you can create within the Document Box and store data for later retrieval. 
You can create or delete a Custom Box, and manipulate data in various ways as described below:
• Creating a box...page 6-2
• Storing Documents in a Custom Box...page 6-4
• Printing a Document in a Custom Box...page 6-5
• Sending a Document from a Custom Box...page 6-6
• Moving/ Copying /Joining Documents in a Custom Box...page 6-8
• Deleting Documents in a Custom Box...page 6-11
Job Box
Job Box holds temporary or permanent print data for use with job options including Private Print, Stored Job, 
Quick Copy, Proof and Hold, Repeat copy and Form Overlay which will be discussed later.
Four individual Job Boxes corresponding to these job options are already provided in the Document Box.
These Job Boxes cannot be created or deleted by a user.
NOTE: You can set up the machine so that temporary documents in job boxes are automatically deleted. For 
details, refer to Automatic Delete Setting for Temporary Documents on page 6-17.
Private Print/Stored Job Box...page 6-12
In Private Printing, you can specify that a job is not printed until you release the job at the operation panel. When 
sending the job from the application software, specify a 4-digit access code in the printer driver.
The job is released for printing by entering the access code on the operation panel, ensuring confidentiality of 
the print job.
The data will be deleted upon completion of print job or after the main power switch is turned off.
In Hold Job, access codes are not mandatory, but can be set on the printer driver if printing with PIN security is 
required. In this event, you need to enter the access code to print the stored jobs. Print data will be stored in the 
hard disk after printing. This will allow printing of the same print data repeatedly.
Quick Copy/Proof and Hold Box...page 6-13
Quick Copy feature facilitates additional prints of a document already printed.
Activating Quick Copy and printing a document using the printer driver allow the print data to be stored in the 
Quick Copy Job Box.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation
3-34 When additional copies are required, you can reprint the required number of copies from the operation panel.
By default, up to 32 documents can be stored.
When power is turned off, all stored jobs will be deleted.
NOTE: When you attempt to store documents in excess of the above maximum, the oldest document data will 
be overwritten by the latest document data.
The Proof and Hold feature produces only a single proof print of multiple-print job and holds printing of the 
remaining copies.
Printing a multiple-print job in Proof and Hold using the printer driver allows only a single copy to be printed while 
maintaining the document data in the Job Box.
To continue to print the remaining copies, use the operation panel.
You can change the number of copies to print.
Repeat Copy Box...page 6-15
Repeat Copy feature stores the copied original document data in the Job Box and allows you to print additional 
copies later.
By default, up to 32 documents can be stored.
When power is turned off, the original data will be deleted.
NOTE: Repeat Copy function is not available when the optional Data Security Kit is installed.
Form for Form Overlay Box...page 6-17
Image Overlay feature copies the original document overlaid with a form or image.
This Job Box is used to store the forms or images for overlaying.
Removable Memory Box
A USB memory inserted into the USB memory slot (A1) of the machine is also recognizable as a Job Box. This 
allows printing of the PDF data stored in the USB memory.
You can print PDF data directly from the USB memory without a PC.
Image files scanned using this machine can also be saved to USB memory in the PDF, TIFF, JPEG, XPS or 
high compression PDF format (Scan to USB).
Fax Box
Fax Box stores the fax data received. For details, refer to the Operation Guide supplied with the fax kit.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation
3-35
3
Basic Operation for Document Box
This section explains basic operations for document boxes, using examples where tasks are carried out with 
custom boxes.
NOTE: In the following explanation, it is assumed that user login administration is enabled. For details on User 
Logon privileges, refer to User Privileges on page 3-40.
The basic procedure for using document boxes is explained below.
1Press the Document Box key.
The default document box screen appears.
2Press [Custom Box], [Job Box] or [Removable 
Memory] to select the type of document box you 
want to work with.
In this example, press [Custom Box].
The box list screen appears. 
You can use this screen for tasks such as 
registering and editing boxes. For more information 
on using the box list, refer to Custom Box List on 
page 3-36.
NOTE: For more information on registering boxes, 
refer to Creating a New Custom Box on page 6-2.
You cannot access boxes if you forget your password. 
In this event, access the machine using administrator 
privileges and overwrite your box password.
3Select the box containing the document you want 
to work with and press [Open].
The document list screen appears.
You can use this screen for tasks such as printing 
and sending documents. For more information on 
using the document list, refer to Document List on 
page 3-37.
NOTE: If a custom box is protected by a password, 
enter the correct password.
Custom Box.
No.Name
Owner
Used Area
Register/Edit
Box
 1/1
0001 SALES  Anonymous - - - -
Store File Detail Open
Custom Box Job Box Removable Memory
Status
08/08/2009    10:10
FAX BoxSearch(Name)
Search(No.)
Custom Box.
No. Name Owner Used Area
Register/Edit
Box 1/1
Store File Detail Open
Custom Box Job Box Removable Memory FAX Box
Status08/08/2009    10:10
0001 10%
Box 0002 20%
Box 0003 30%User
User
User 1
2
3 Box 0001
0002
0003Search(Name)
Search(No.)
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation
3-36
Custom Box List
The box list shows the registered custom boxes. The custom boxes can be listed by box number or by box name. 
You can manipulate the list in a range of ways, as shown below.
Custom Box.
No. Name Owner Used Area
Register/Edit
Box 1/1
Store File Detail Open
Custom Box Job Box Removable Memory FAX Box
Status08/08/2009    10:10
0001 10%
Box 0002 20%
Box 0003 30%User
User
User 1
2
3 Box 0001
0002
0003Search(Name)
Search(No.)
Listing the boxes by number in ascending/
descending order.Listing the boxes by name in 
alphabetical order.
Registers new boxes and 
checks, modifies or 
deletes box information.
Opens the selected box.
Displays the details for 
the selected box. Saves the document in the 
selected box.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation
3-37
3
Document List
The document list is a list of the documents stored in the custom box. Documents can be listed either by name 
or as thumbnails. The list can be used as shown below.
List
Thumbnail
NOTE: You can select multiple documents by pressing the respective document checkboxes. However, note 
that you cannot select multiple documents when you are sending documents.
1/1
0001  0404200710574501  10/10/2008 09:40 21 Box:  
File Name Date and Time Size
MB
Status08/08/2009    10:10
 0404200710574511
 0404200710574521 10/10/2008 09:50
10/10/2008 10:00MB
MB 21
21
PrintSendJoin Move/Copy Delete Store FileDetail
Preview
Close 0002
0003
Search(Name)
Selecting more than one 
document at a time.Listing the documents by time of update in 
ascending/descending order.Listing the documents by size in 
ascending/descending order. Listing the documents by name 
in alphabetical order.
Previews the selected 
document. Highlighting a document to 
display its details with [Detail]. Selecting documents by 
checking checkboxes.
Box:
Detail
 1/1 040420075501
JoinMove/Copy Delete
Close
 040420075502
Send PrintStore File SALES
Preview
Status08/08/2009    10:10
Search(Name)
Selecting more than one 
document at a time.
Highlighting a document 
to display its details with 
[Detail].Prints, sends, joins, moves, 
copies or deletes the 
selected documents.
Saves the document in the 
open box. Selecting documents by 
checking checkboxes.Switches between list display 
and thumbnail display.
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation
3-38
Viewing/Editing Box Details
You can check and modify box information.
Use the procedure below.
1Press [Register/Edit Box] in the box list screen.
2Highlight the box whose details you wish to check 
or edit and press [Detail/Edit].
NOTE: If a custom box is protected by a password, 
enter the correct password.
3Check the box details.
To edit details, press [Change] of the detail you 
wish to edit. Edit the detail as desired and press 
[OK].
4If you have changed the details, press [Register] 
and then press [Yes] in the confirmation screen. 
If you did not change the details, press [No].
5Press [Close]. The display returns to the default 
Document Box screen.
Document Box/Removable Memory - Register/Edit Box
No.
NameOwner Used Area
0001 SALES  Anonymous - - - -
 1/1Add
Detail/Edit Delete
Close
Status10/10/2008    10:10
Status08/08/2009    10:10
Box:
Box No.:
Box Name:
Box Password:Usage Restriction: Change
Change
ChangeChange 0001
SALES
********
Auto File Deletion:
Change
Cancel Register Free Space:Overwrite Setting:
Change 21
  day(s)
30  MB
Permit
  GB
30Delete after Printed:
Change
Off
Downloaded From ManualsPrinter.com Manuals