Honda Bmw 5 Service Manual
Have a look at the manual Honda Bmw 5 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 328 Honda manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
513-3 Interior ~rirnl The console between the two front seats starts behind the shifler housing. It houses the parking brake handle, optional telephone and oddments storage tray. The rear portion of the console houses the ashtray and covers the emergency brake cable ends. NOTE- The accompanying photos illustrate a model with automatic transmission. Manual transmission models are similar. Center console, removing and installing 4 Remove shift knob by pulling straight up (arrow). Gently pry shift bezel harness (arrow). up out of console and disconnect wiring Models equipped with automatic transmission remove neu- tral safety switch fasteners (arrows) and remove bezel with switch.
51 3-4 /Interior Trim Carefully pry cup holder (arrow) out of console, 4 Pry air vent down to release locking clips and remove. < Remove screws (arrows) at base of front seat armrest and slide armrest forward to remove. 4 Remove console glove box (A). Remove rear trim panel fasteners (B).
Interior iriml 4 Carefully pry out 4-way hazard flasher switch (A) Disconnect wiring harness (B). Remove trim panel fastener (arrow) under 4 way flasher switch. 4 Remove console trim panel retaining fasteners (arrow) at rear of trim panel. Remove front console trim fasteners (arrows) and carefully remove trim panel.
51 3-6 Interior Trim Remove parking bralte lever side cover fasteners (arrows) 4 Unclip trim boot for parking brake lever and pull boot and handle forward off brake lever. Remove parking bralte cover fastener (arrow) and remove cover. 4 Remove fasteners at rear of console (arrows). 4 With left and right seats in lowest position, remove side con- sole fasteners (arrow). - Remove left and right side console trim covers. See Lower - Remove center console. - Installation is reverse of removal.
Interior Trim The E39 dashboard assembly includes the instrument clus- ter, passenger side airbag, glove compartment, fuse and re- lay panel, radio. IHKA control panel oron-board monitor (if equipped with GPS). The dash is made up of an upper and lower sections. The lower section must be remove before the upper section can be removed. Dashboard removal is a complex operation. Read the proce- dures through before starting work. Lower dash panel assembly, removing and installing - Disconnect negative (-) cable from battery and cover termi- nal with insulating material. --7 CAUTION- Prior to disconnecting the battery, read the battery discon- nectioncautionsgiven atthe irontin001 General Warnings and Cautions. - Place steering column in down and extended position. 4 Remove left side foot well panel fasteners (A and B). < Using a plastic trim tool, gently pry left and right steering col- umn trim panels (white arrow) to remove and release snap clip on column boot (black arrow). I 1 < Remove instrument cluster trim panel fasteners (arrows). Pull trim panel out and disconnect harnesses for light switches. - Remove radio volume control knob.
I Interior Trim Insert allen wrench into slot approximately 1 mm and turn through 90. Disconnect wiring harnesses from radio. Remove radio. 4 Remove left and right locking clips (arrow) from glove com- partment straps. 4 Carefully pry left and right dashboard trim out to remove 4 Remove right side lower dash support screws (A)
Interior Trim 4 Remove trim plug from right side of lower dash and remove screw. - Open glove compartment door. - Remove right side foot well trim panel screw and slide rim panel back to remove. 4 Remove glove compartment mounting screw from right side of dash (arrow). Remove right side console trim panel fasteners (black ar- row) and pull panel back (white arrow) to remove.
interior Trim Remove right side lower dash fastener (arrow) < Remove left side console trim panel fasteners (black arrow) and slide panel backward (white arrow) to remove. 4 Remove left slde lower dash fastener (arrow) 4 Remove upper dash fastener (arrow). - Pull bottom of lower dash out to remove - Installation is reverse of removal, noting the following: Instrument cluster harness connector loclting levers must be in up position before installing connectors. If replacing instrument cluster with new unit, recode new cluster using BMW scan tool DISplus, MoDiC or equiva- lent.
Interior ~riml Upper dash assembly, removing and installing - Remove lower dash assembly. See Lower dash panel as- sembly, removing and installing. I I 4 Remove instrument cluster fasteners (arrows) and swing cluster out to remove. Disconnect wiring harnesses from instrument cluster. 4 Remove A-pillar (windshield pillar) trim on left and right sides by prying out HPS cover (arrow). - Remove screws beneath covers. - Remove passenger side airbag. See 721 Airbag System (SRS).
513-12 Interior Trim < Remove steering column trim panel by releasing clips (ar- rows). < Remove left side mounting fasteners (arrows). Lilt dash panel upwards and remove through passenger door. - Installation is the reverse of removal. Window and door post trim panels, removing and installing Windshield post trim (A pillar), removing and Installing - On 1998 and later cars, disconnect battery negative (-) cable I WARNING- On 1998 and later models, front Head Protection System (HPS) airbags are installed in the driver and passenger side windshieldpost trim (A-pillar). See 721 Airbag System (SRS) for warnings and cautions regarding airbags. < Remove A-p~llar trim panel fastener cap (arrow)