Canon Selphy Cp810 User Guide

							31
Press the - or + button to set the 
number of copies.
Select the number of prints.
 
O Select the number of copies for each image.
 
O For Windows, click [Print] to start printing.
 
O For Macintosh, click [Print menu], then click [Print] in the 
screen that appears.
End the program.
Windows
 
O When all printing is finished, click  at the top right 
corner of the screen.
Macintosh
 
O When all printing is finished, click  at the top left corner 
of the screen.
 
O The layout image shown in the right side of the screen that is displayed\
 when you click [ID Photo Print] in Step 2 
on p.  30 differs from the actual layout. You can check the actual layout by clicking [Preview] in the [4.Print] 
screen.
 
O If you select an index layout in the screen that is displayed when you c\
lick [Layout Print] in Step 2 on  p.  30, then 
you cannot adjust the image, such as changing the size or orientation of\
 the image in the [4.Print] screen.
4
5
 
						

							32
 Printing From Your Digital Camera
You can select and print images from a digital camera that supports the P\
ictBridge standard.A Canon brand compact digital camera will be used as an example to explai\
n the print method. If operations 
are different for the digital camera you use, refer to the user guide included \
with your digital camera.
Make sure that a memory card is not inserted 
in SELPHY, and it is not connected to a 
computer.
Connect SELPHY to the digital camera using 
the interface cable (USB cable) included with 
the digital camera.
First turn on SELPHY, then turn on the digital 
camera and play back the images on the 
digital camera.
 
X Depending on the digital camera you use,  may appear 
on the digital camera’s screen.
Perform the necessary operations on your 
digital camera to select an image for printing.
 
O Use the digital camera to start printing.
 
X Printing starts.
 
O After printing has completed, turn off SELPHY and the 
digital camera, then unplug the cable.
 
O You cannot stop printing with the  v button. Use the digital camera to stop printing.
 
O PictBridge is an industry standard established by the Camera & Imaging P\
roducts Association (CIPA). It allows 
you to print images taken with any digital camera or video camera, regar\
dless of the manufacturer or model, by 
connecting to a printer without using a computer .
1
2
3
4
 
						

							33
  Printing Images Using Digital Camera 
Specified Settings (DPOF Print)
You can make print settings and select images to print on your digital ca\
mera and then print the images all at 
once. For details, refer to the user guide included with your digital ca\
mera.
Label side
Insert a memory card containing DPOF 
settings into the appropriate memory card slot.
 
X [DPOF images remain Print images?] appears on the 
screen.
Press the o button.
Settings with the digital camera: Date : File number: Index (Print Type): Standard (Print Type)
Number of sheets required
Check the settings.
Print the images.
 
O Press the p button to start printing.
 
OThe date and file number are the DPOF settings made with the digital cam\
era (these settings cannot be changed 
with SELPHY).
 
OIf, on a Canon brand digital camera, the [Print Type] is set to [Standard], the settings made in “Printing a Variety 
of Images” (pp.  21 –  25) will be applied.  
 
O The screen in Step 3 can also be displayed when you press the  k button and select [DPOF Print], then press 
the o button. [DPOF Print] only displays when a memory card is inserted that \
contains DPOF information set 
with the digital camera.
1
2
3
4
 
						

							34
 Printing When a Power Outlet is not Available
You can use the battery pack NB-CP2L (sold separately) and charger adapter CG-CP200 (sold separately) 
to print images where there is no power outlet. You can print approximately 36 sheets* of postcard size paper 
with a fully charged battery.
* The number of sheets is determined under Canon testing standards and may\
 change depending on the 
printing conditions.
  Installing the Batter y
 Remove the battery terminal cover.
Attach the battery to the charger adapter.
 
O First insert in the direction indicated by , and then in 
the direction indicated by  until it clicks and locks into 
place.
Connect the charger adapter to SELPHY.
Charging the Batter y
Connect the power cord to the charger adapter 
with the attached battery.
 
X The battery charge starts and the orange lamp will be lit.
 
X The battery charge will complete after approximately 4 
hours and the green lamp will be lit.
 
O The charge will continue even if you turn SELPHY on 
while the charger adapter is connected to it. However, 
the charge stops while printing.
 
O For cautions concerning the battery, refer to the user guide included with the battery.
 
O Keep SELPHY on a stable surface such as a desk while it is connected to the charger\
 adapter and take care not 
to unplug the charger adapter cable.
1
2
3
 
						

							35
  Troubleshooting 
If you think there is a problem with SELPHY, first, check the following. If the items below do not solve your 
problem, contact a Canon Customer Support Help Desk as listed on the inc\
luded customer support list.
Power
 
O Power will not turn on
• Make sure the plug is correctly connected  (p.  10).
•  Hold the q button pressed until the start-up image appears on the screen  (p.  11 ).
•  If you are using the battery pack NB-CP2L (sold separately) and charger adapter CG-CP200 (sold 
separately), check if the battery is charged, attached correctly, and the cable is connected properly.
Printing Problems
 
O Cannot print
• Make sure SELPHY is turned on  (p.  11 ).
•  Make sure that the ink and paper cassettes are correctly inserted  (p.  10).
•  Make sure there is no slack in the ink sheet  (p.  7).
•  Make sure that you are using dedicated paper  (p.  
9).
•  When the ink is spent, replace the ink cassette with a new one. When the\
 paper is spent, refill the paper 
cassette with new paper  (p.  14).
•  Make sure you are using the correct combination of paper, paper cassette and ink cassette  (p.  7).
•  Connect SELPHY to only one device at a time. If SELPHY is connected simultaneously to a digital 
camera, computer and has a memory card inserted, you may not be able to \
print properly.
•  Depending on the room temperature, SELPHY may overheat and temporarily stop operating. This is not 
a malfunction. Wait until the temperature drops and printing resumes. 
Cannot display/print images from memory card or USB flash memory
•  Make sure the memory card is inserted all the way into the correct slot \
with the label facing upward 
(pp.   12,  13) .
•  Make sure the USB flash memory is inserted all the way in the correct sl\
ot faced correctly  (p.  

15).
•  Make sure you are using a supported image type  (p.  12).
•  Make sure that any memory card requiring an adapter is inserted into the\
 adapter before being inserted 
into the slot 

(p.  12).
Cannot print from a digital camera
•  Make sure your digital camera supports PictBridge  (p.  32).
•  Make sure SELPHY and the digital camera are connected correctly  (p.  32).
•  Make sure the rechargeable battery/disposable batteries in your digital \
camera are not depleted. If there 
is insufficient charge, replace the battery with a fully charged one, or new bat\
teries.
Cannot print from a computer
•  Make sure you installed the software according to the correct procedure \
 (p.  28).
•  Make sure SELPHY is connected directly to a port on the computer with the USB cable  (p.  29)

.
•  Problems Exclusive to Windows: Make sure the printer is not set to offline. 
If it is, right-click the printer icon and cancel the offline setting.
•  Problems Exclusive to Macintosh: Make sure SELPHY is registered on the Printer List  (p.  29).
 
						

							36
 
O Cannot print the date
Cannot print from memory cards or USB flash memory
• Make sure the date imprint option is set  (p.  33). 
If you are using DPOF printing, the date imprint settings are configured\
 on the digital camera used for the 
DPOF settings.
Cannot print from digital cameras
•  Make sure the date setting in your digital camera is set to [On]. Howeve\
r, if the setting is [Default], the 
date imprint settings on SELPHY will be used.
 
O Cannot make clean prints
• Make sure the ink sheet and paper are not dusty.
•  Make sure there is no dust on the inside surfaces of SELPHY  (p.  39).
•  Make sure no condensation has formed on the inside surfaces of SELPHY

 (p.  39).
•  Make sure SELPHY is not placed near a device emitting electromagnetic waves or a strong \
magnetic 
field (p.  5).
 
O Colors on the computer display and the print are different
• Color generation methods are different with computer screens and printers. Moreover, variance may be 
attributable to the environment in which the screen is viewed (color an\
d strength of the light), or to the 
screen’s color adjustment settings.
 
O After using the computer to cancel a print in progress, an image that ha\
d already been printed was 
printed again when printing resumed
• When you restart printing on a Macintosh computer after canceling, an al\
ready printed image may print 
again when printing resumes.
Paper Problems
 
O Paper will not fit into cassette
• Make sure the paper size matches the size of the paper cassette  (p.  2).
 
O Paper is not feeding properly/frequent paper jams
• Make sure the paper and paper cassette are correctly inserted  (pp.  8,  10).
•  Make sure there are less than 19 sheets in the cassette.
•  Make sure 19 or more sheets have not collected on the outer lid of the p\
aper cassette.
•  Make sure that you are using dedicated paper  (p.  9).
 
O Cannot print the specified number of prints/paper left over
• Paper may be left over if the ink runs out first (p.  14).
 
O Paper is jammed
• If the paper is sticking out from the front or back (paper ejection slo\
t)  (p.  6) of SELPHY, gently tug on 
the paper to remove it. However, if a gentle tug is not sufficient to remove the paper, do not attempt to 
forcibly pull it out. T urn the printer of

f and on repeatedly until the paper is ejected. If you have accidentally\
 
turned off the power while printing, turn it on again and wait for the paper to b\
e ejected. Consult your 
retailer or a Canon Customer Support Help Desk in the event of a paper j\
am. Do not remove jammed 
paper by force. The printer could be damaged.
  Error Messages
If a problem occurs with SELPHY, a message appears on the screen. If a possible solution displays with \
the 
error message, follow the on-screen instructions. If no solution display\
s, refer to “Troubleshooting”  (p.  35).
If these items do not solve your problem, contact a Canon Customer Suppo\
rt Help Desk as listed on the 
customer support list.
 
O If a problem occurs while SELPHY is connected to a digital camera, an error message may appear for you t\
o 
check on the screen of the digital camera.
 
						

							37
 Specifications
SELPHY CP810
Printing MethodDye-sublimation thermal transfer (with overcoating)
Resolution/Color Representation 300 x 300 dpi
Gradation 256 shades per color
(Resolution based on the “area intensity method” is equivalent to\
 a 4800 x 4800 dpi 
color representation)*
1
InkDedicated color ink cassette (Y/M/C/overcoating)
Paper Postcard Size, L Size, Card Size (including full page label sheets, 8-label sheets)
Print Size Borderless Bordered Postcard Size
L Size
Card Size
(Each label on an 8-label sheet) 100.0 x 148.0 mm (3.94 x 5.83 in.)
89.0 x 119.0 mm (3.50 x 4.69 in.)
54.0 x 86.0 mm (2.13 x 3.39 in.)
22.0 x 17.3 mm (0.87 x 0.68 in.) 91.3 x 121.7 mm (3.59 x 4.79 in.)
79.1 x 105.1 mm (3.11 x 4.14 in.)
49.9 x 66.6 mm (1.96 x 2.62 in.)
–
Printing Speed*
2Printing from memory cards/USB flash memory/Connected to cameras 
(PictBridge)
Postcard Size
L Size
Card Size Approx. 47 sec.
Approx. 39 sec.
Approx. 27 sec.
Feeding System Automatic paper feed from paper cassette
Ejection System Automatic paper ejection on top of paper cassette
Screen Tilt-up, 6.8 cm (2.7 in.), TFT LCD Color Monitor
Interface Hi-Speed USB Connecting to a PictBridge compliant device: USB compliant Type A connector Connecting to a computer: USB compliant Mini-B connector
Memory Cards
CF Card, Microdrive, xD-Picture Card*3, SD Memory Card, SDHC Memory Card, 
SDXC Memory Card, MMC Card, MMCplus Card, HC MMCplus Card, miniSD 
Memory Card*
3, miniSDHC Memory Card*3, microSD Memory Card*3, microSDHC 
Memory Card*3, microSDXC Memory Card*3, RS-MMC Card*3, MMCmobile Card*3, 
MMCmicro Card
USB Flash Memory FAT/exFAT only supported
Operating Temperatures 5 – 40 °C (41 – 104 °F)
Operating Humidity 20 – 80%
Power Compact Power Adapter CA-CP200 B
Battery Pack NB-CP2L (Sold Separately)
Charger adapter CG-CP200 (sold separately)
Power Consumption 60 W or less (4 W or less on standby)
Dimensions 178.0 x 127.0 x 60.5 mm (7.01 x 5.00 x 2.38 in.) (excluding protrusio\
ns)
Weight (printer only) Approx. 810 g (approx. 28.6 oz.)
*1 The “concentration gradation method” used by SELPHY allows 256 shades (max) of color to be represented per dot. In 
comparison, printers using the area intensity method represent shades by\
 the number of dots printed in a unit of area, i.e. 
256 dots (16 dots vertical x 16 dots horizontal) are needed to represe\
nt the same 256 shades of color. SELPHY’s color 
representation is therefore equivalent to a 4800 x 4800 dpi resolution b\
ased on an area intensity method.
  • Gradation refers to the number of shades that can be represented on\
 a print. For example, black and white has two  gradations, while 256 gradations include the shades of gray going from w\
hite to black that can be represented.
  • “dpi” refers to the number of dots that can be printed in 1 i\
nch (“dots per inch”).
*2 Measured from the start of the yellow printing pass to final output.
*3  Special adapter (commercially available) is required.
 
						

							38
Compact Power Adapter CA-CP200 B
Rated Input 100 – 240 V AC (50/60 Hz) 1.5 A (100 V) – 0.75 A (240 V)
Rated Output   24 V DC, 1.8 A
Operating Temperatures  0 – 45 °C (32 – 113 °F)
Dimensions  122.0 x 60.0 x 30.5 mm (4.80 x 2.36 x 1.20 in.) (excluding power cord\
)
Weight  Approx. 310 g (10.9 oz.)
Dust Protection Cover DPC-CP100
This may not be included in some regions. Purchase separately as necessa\
ry.Dimensions 137.5 x 117.0 x 27.2 mm (5.41 x 4.61 x 1.07 in.)
Weight  Approx. 88 g (3.1 oz.)
Charger Adapter CG-CP200 (Sold Separately)
Rated Input 24 V DC
Rated Output   24 V DC
Operating Temperatures  5 – 40 °C (41 – 104 °F)
Dimensions  156.2 x 49.0 x 35.5 mm (6.15 x 1.93 x 1.40 in.) (excluding protrusion\
s)
Weight  Approx. 134 g (4.73 oz.)
Batter y Pack NB-CP2L (Sold Separately)
Type Rechargeable lithium-ion battery
Nominal Voltage  22.2 V DC
Nominal Capacity 1200  mAh
Battery Life (Charge Cycles)   Approx. 300 times
Operating Temperatures  5 – 40 °C (41 – 104 °F)
Dimensions  110.0 x 40.7 x 37.5 mm (4.33 x 1.60 x 1.48 in.)
Weight  Approx. 230 g (8.11 oz.)
 
O All data is based on tests by Canon.
 
O Printer specifications or appearance are subject to change without notic\
e.
CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Use of  genuine Canon accessories is recommended.This product is designed to achieve excellent performance when used with\
 genuine Canon accessories. 
Canon shall not be liable for any damage to this product and/or accident\
s such as fire, etc., caused by 
the malfunction of non-genuine Canon accessories (e.g., a leakage and/o\
r explosion of a battery pack). 
Please note that this warranty does not apply to repairs arising out of \
the malfunction of non-genuine 
Canon accessories, although you may request such repairs on a chargeable\
 basis.
 
						

							39
 Handling SELPHY
 
O Do not apply strong impact or vibration. This may cause paper jams or the printer to malfunction.
 
O Do not expose SELPHY to insect sprays and volatile liquids. Do not allow SELPHY to be in contact with 
rubber or plastic products over a long time. This may deteriorate the external casing.
 
O Depending on the room temperature, SELPHY may overheat and temporarily stop operating. This is not 
a malfunction. W
ait for a while till SELPHY cools down and restarts operating. Printing may take longer 
when continuously printing, the room temperature is high, or SELPHY’s rear air vent is blocked because 
SELPHY will temporarily stop printing due to overheating.
 
O When moving SELPHY from a cold place to a warm place, insert SELPHY

 in an airtight plastic bag 
in advance and remove after SELPHY  has reached room temperature to avoid condensation. If 
condensation forms, leave SELPHY in room temperature until the condensation evaporates naturally.
 
O Clean SELPHY with a soft dry cloth.
 
O If dust accumulates on the air vent  (p.  

6), remove the ink cassette (p.  14) and clean away the dust. The 
printing results may not be clean if dust gets in from the air vent.
 
O Never clean SELPHY with solvents such as benzine or thinner, or mild detergent. This may 
deteriorate or deform the external casing, or the coating may peel off.
 
O SDXC Logo is a trademark of SD-3C, LLC.
 
O This device incorporates exFAT technology licensed from Microsoft.
 
O CF5 logo is a trademark of CompactFlash Association.
 
O Reprinting, transmitting, or storing in a retrieval system any part of t\
his guide without the permission 
of Canon is prohibited.
 
O Canon reserves the right to change the contents of this guide at any tim\
e without prior notice.
 
O Illustrations and screenshots in this guide may differ slightly from the actual equipment.
 
O The above items notwithstanding, Canon accepts no liability for damages \
due to mistaken operation 
of the products.
Trademark Acknowledgments
About This Guide
 
						

							PRINTED IN THE EU  © CANON INC. 2012
European Union (and EEA) only.
 These symbols indicate that this product is not to be disposed of with y\
our 
household waste, according to the WEEE Directive (2002/96/EC), the Bat\
tery 
Directive (2006/66/EC) and/or your national laws implementing those Di\
rectives. 
If a chemical symbol is printed beneath the symbol shown above, in accor\
dance 
with the Battery Directive, this indicates that a heavy metal (Hg = Mer\
cury, Cd = Cadmium, 
Pb = Lead) is present in this battery or accumulator at a concentration\
 above an applicable threshold 
specified in the Battery Directive.
This product should be handed over to a designated collection point, e.g\
., on an authorized 
one-for-one basis when you buy a new similar product or to an authorized\
 collection site for recycling 
waste electrical and electronic equipment (EEE) and batteries and accu\
mulators. Improper handling 
of this type of waste could have a possible impact on the environment an\
d human health due to 
potentially hazardous substances that are generally associated with EEE.\
 
Your cooperation in the correct disposal of this product will contribute \
to the effective usage of natural 
resources. 
For more information about the recycling of this product, please contact\
 your local city office, waste 
authority, approved scheme or your household waste disposal service or visit 
www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands