Canon Selphy Cp810 User Guide

							21
 Printing a Variety of  Images
You can use various printing features, such as imprinting the shooting da\
te or adjusting the color of an image. 
You do not need to make settings for each image because once the settings\
 are made, they are applied for 
all images.
  Making Settings
Display the settings screen.
 
O Press the k button.
 
O Press the ud buttons to select [Change Settings], and 
then press the o button.
Select the item and change the settings.
 
O Press the ud buttons to select an item.
 
O Press the lr buttons to change the settings, then press 
the v button to complete the setting.
 
O  Pressing the v button again will restore the image 
display screen.
 
O Refer to pp.  22 –  25 for information about each setting.
Print.
 
O Select an image for printing  (p.  13) and the number of 
copies (p.  13), then press the  p button to print.
1
2
3
 
						

							22
  Printing With the Date (Date)
02/02/2012
 
O You can print the shooting date recorded by the 
digital camera.
 
O
Off (Default setting) / On
 
O Turning off SELPHY will return the setting to [  Off].
 
O Since the date printed will be the date the image was recorded by the di\
gital camera, it cannot be changed on 
SELPHY.
 
O You can change the style of the printed date in [Date Format]  (p.  25).
 
O The date will not print if [ 
 Index], or [  Shuffle] is selected in [Page Layout]  (p.  23).
 
O Specify [  Off] for images that already have the date imprinted by the camera to prev\
ent two dates being 
printed in the image.
  Correcting Red Eyes and Printing (Correct Red-Eye)
 
O Correct images with red-eye.
 
O Off (Default setting) /  On
 
O Portions other than the eyes may be mistakenly corrected. Set [Correct R\
ed-Eye] to [  On] 
only when printing images with red-eye.
 
O If SELPHY is turned off or the memory card is removed, the setting will return to [  Off].
 
O Red-eye may not be automatically detected or optimally corrected when fa\
ces appear extremely small, large, 
dark or bright in relation to the overall image, with faces turned to th\
e side or diagonally, or faces with a portion 
hidden.
 
O You cannot correct red-eye when you have selected [ 
 2-up], [  4-up], [  8-up], or [  Index] in [Page 
Layout] (p.  23).
 
O Red-eye correction is not applied when you have selected [ 
 Sepia] or [  B/W] in [My Colors]  (p.  24).
 
O The level of correction may change depending on the cropping range setti\
ng, page layout, and paper size.
 Printing With or Without a Border (Borders)
 
O You can set images to print with or without a 
border.
 
O
 Borderless (Default setting) /  Bordered
 
O Turning off SELPHY will return the setting to [  Borderless].
 
O Images are printed without borders if you select [  Index], or [  Shuffle] in [Page Layout] (p.  23).
 
O If you select [  8-up] in [Page Layout] (p.  23) when printing on card sized paper  (p.  2), images will be printed 
without borders, even if [  Bordered] is selected.
 
						

							23
  Selecting a Layout and Printing (Page Layout)
 
O You can set the number of images that you want 
to print on one sheet. The number of images that 
you specified  (p.  13) will be printed in the selected 
layout.
 1-up
(Default setting) Prints one image using a full sheet 
8-up*
Prints eight images on one sheet
 2-up
Prints two images on one sheet Index
Prints as an index
 4-up
Prints four images on one sheet Shuffle Automatically arranges images in 
a variety of sizes for printing on a 
single sheet
*  Set the layout to [  8-up] when using Color Ink Cassette/Label Set KC-18IL (8-label sheet) 
(p.  2).
 
O If SELPHY is turned off, the setting will return to [  1-up].
 
O You can retain a layout even after SELPHY is turned off. To have SELPHY retain layouts, first make sure 
SELPHY is turned off, press and hold the  k button, u button, and 
p button, and then press and hold the 
q button until 
“SELPHY” is displayed on the screen. If you want SELPHY to no longer retain layouts, turn off 
SELPHY and then turn it on in the same way as you did before for retaining lay\
outs. 
 
O The image position cannot be specified.
 
O Depending on the selected layout, the settings made in [Date]  (p.  22), [Image Optimize] (p.  24), [Correct Red-
Eye] (p.  22), [Borders] (p.  22), [Smooth Skin] (p.  24), or [Brightness] (p.  25) may not be applied.
 
O If you select [Print All Images] (p.  16) in [ 
 Index], you can print all images on a memory card as an index 
print.
 Arranging Images of Different Sizes (Shuffle)
 
O Shuffle automatically arranges images in a variety 
of sizes for printing.
 
O A group of up to 8 images, or a group of up to 20 
images can be printed on a single sheet.
 
O Prints can be made on L size or Postcard size 
paper (p.  2).
 
O In “Making Settings” (p.   21), press the ud buttons 
to select [Page Layout] in the screen in Step 2.
Press the lr buttons to select [
  Shuffle], then 
press the o button.
 
O When the screen shown on the left appears, press 
the ud buttons to select an option.
 
O Press the lr buttons to change the settings, then 
press the v button to complete the setting.
 
O Pressing the v button twice will restore the image 
display screen.
 
O You cannot specify the position of the images.
 
O It may take some time before printing starts.
 
						

							24
  Making Skin Look Smooth in Prints (Smooth Skin)
 
O Makes skin look smooth and beautiful in prints.
 
O Off (Default setting) /  On
 
O This setting is reset to [  Off] when printing finishes, SELPHY is turned off, or the memory card is removed.
 
O Correction may be applied to areas other than skin, producing unexpected\
 results.
 
O When [Page Layout] (p.  23) is set to [ 
 Index], [Smooth Skin] will not be applied.
  Changing the Color Tone and Printing (My Colors)
 
O You can adjust the colors in your images, or make your images sepia-toned\
 or black and white.
 Off 
(Default setting) — 
PositiveFilm Intense, natural colors like those 
obtained with positive film
 
Vivid Emphasizes the contrast and color 
saturation for a vivid impression 
Sepia
Changes the image to sepia tone
 Neutral Tones down the contrast and color 
saturation for neutral hues 
B/W
Black and white
 
O Turning off SELPHY will return the setting to [  Off].
 
O Depending on the settings made in My colors, [Correct Red-Eye]  (p.  22) settings may not be applied.
  Getting the Best Results With Auto Correction (Image Optimize)
 
O SELPHY will automatically correct the image to 
achieve optimum image quality.
 
O
 Off /  On (Default setting)
 
O Some images may not be adjusted correctly.
 
O Turning off SELPHY will return the setting to [  On].
 
O When [Page Layout] (p.  23) is set to [  Index], [Image Optimize] will not be applied.
 
O The level of correction will change depending on the page layout and pap\
er size.
 
						

							25
  Adjusting the Brightness (Brightness)
 
O You can adjust the brightness of an image within 
a range of ±3.
 
O The larger the + value, the brighter the image 
gets. The larger the - value, the darker the image 
gets.
 
O Turning off SELPHY will return the setting to [±0].
 
O [Brightness] will not be applied if [  Index] is selected in [Page Layout]  (p.  23).
  Changing the Date Style (Date Format)
02/02/20122012/02/02
 
O You can change the order of the printed date 
(p.  22).
 
O mm/dd/yyyy (Default Setting), dd/mm/yyyy, 
yyyy/mm/dd
 
O The setting will be retained even if SELPHY is turned off or the memory card is removed from the slot.
 Saving Energy (Auto Power Down)
 
O SELPHY turns itself off automatically if it is not operated for approximately 5 minutes.
 
O On (Default setting) / Off
 
O SELPHY is not turned off automatically when it is connected to a camera or a computer, or an error message is 
displayed on the screen.
 
						

							26
Printing From Your Computer
If you connect your computer to SELPHY and use the supplied software, you can view all images at once and 
take advantage of various printing functions that cannot be done with ju\
st SELPHY alone. 
Select favorite images from an index and print
 
O You can select images you wish to print from an index, and print them all\
 at 
once. You can also add text to your images and print.
Print with decorations
 
O You can add frames or stamps to your images and print. You can also add 
text to your images and print.
Print calendars
 
O You can add calendars to your prints. You can also add text to your images 
and print.
Arrangement printing
 
O You can arrange multiple images on the same sheet.
ID photo printing
 
O You can print in the size required for ID photos. 
 
O The ID photo may not be accepted officially, depending on the institution the ID photo is required 
for. Please contact the appropriate institution for regulation details.
 
						

							27
System Requirements
WindowsMacintosh
OS Windows 7 Service Pack 1
Windows Vista Service Pack 2
Windows XP Service Pack 3 Mac OS X v10.6 – v10.7
Configuration The above OSs should be pre-installed on computers with built-in USB por\
ts.
CPU Pentium 1.3 GHz or higher Mac OS X v10.7: Intel Core 2 Duo or higher
Mac OS X v10.6: Intel Processor
RAM Windows 7 (64-bit): 2 GB or more
Windows 7 (32-bit), Vista: 1 GB or more
Windows XP: 512 MB or more 1 GB or more
Interface USB
Free
Hard Disk Space 120 MB or more*
140 MB or more
Display 1,024 x 768 pixels or more 1,024 x 768 pixels or more
* For Windows, Microsoft .NET Framework 2.0 (max. 280 MB) or higher must be installed. Installation\
 may take some 
time depending on your computer’s capabilities.
 
						

							28
  Installing and Starting the Software
Windows 7 and Mac OS X 10.7 are used for these explanations.
Items to Prepare
 
O Computer
 
O Supplied CD-ROM (SELPHY CP810 Solution Disk)  (p.  2)
 
O A commercially available USB cable shorter than 2.5 m (8.2 ft.) (SELPH\
Y terminal requires a Mini-B 
connector)
Install the software.
Windows
 
O Place the CD-ROM in the computer’s CD-ROM drive 
and click [Easy Installation] when the screen on the left 
appears.
 
O Follow the on-screen instructions to proceed.
 
O If the User Account Control window appears, follow the 
on-screen instructions to proceed.
 
X Proceed with the installation to display the screen on the 
left.
Macintosh
 
O Insert the CD-ROM in the computer’s CD-ROM drive. 
Click [Finder] in the Dock (the bar at the bottom of the 
desktop) and double click [ 
 ] in the CD-ROM.
 
O If  is displayed on the desktop, you can also double-
click  to display files in the CD-ROM.
 
O When the screen on the left appears, click [Install] and 
follow the on-screen instructions to proceed.
 
O When the installation finishes, click [Finish] to restart the 
computer and complete the installation.
Prepare SELPHY.
 
O Turn off SELPHY and remove the memory card or USB 
flash memory.
 
O Insert an ink cassette and a paper cassette that contains 
paper you want to use into SELPHY  (pp.  7 –  10).
1
2
 
						

							29
Commercially available USB cable
  Connect SELPHY to the computer.
 
O Use the USB cable to connect SELPHY to the computer.
 
O Refer to the user guides included with the cable and 
computer for handling instructions.
Turn on SELPHY.
 
O Press the q button to turn on SELPHY.
Windows
 
O When the installation finishes, click [Restart] to restart 
the computer and complete the installation.
Confirm that the software has been started 
properly.
 
X The software will start and the screen on the left will 
appear when communication between SELPHY and the 
computer is established.
 
O Perform Steps 2 to 4 to automatically start the software 
the next time.
Windows
 
O If the screen in Step 5 does not appear, open it from the [Start] menu r [All Programs] r 
[Canon Utilities]  r [SELPHY Photo Print] r [SELPHY Photo Print].
  Macintosh
 
O If the screen in Step 5 does not appear, follow the procedure below to register your printer. 
Select [  ] from the menu, and click [System Preferences] r [Print & Fax] to open the Print 
& Fax screen. Click [+] to select [CP810] from the pop-up window, then click [Add]. 
After you have finished registering your printer, click the [SELPHY Photo Print] icon from the 
Dock (the bar at the bottom of the desktop) to display the screen for \
Step 5.
 
O SELPHY may not operate correctly if it is connected to a computer via a USB hu\
b.
 
O SELPHY may not function properly if other USB devices (with the exception of \
a USB mouse 
or USB keyboard) are used at the same time. Disconnect any other USB de\
vices from your 
computer and then reconnect SELPHY.
 
O Do not put your computer into standby mode (or sleep mode) while SELPH\
Y is connected to the 
computer’s USB port. If you accidentally do so, awaken the computer from standby \
mode without 
disconnecting the USB cable.
 
O For details on handling the computer, refer to the user guide included with your computer
.
3
4
5
 
						

							30
  Printing Images with the Software
You can print images saved on the computer using the installed software (\
SELPHY Photo Print).
The [Simple print] feature will be explained in this section. Using this\
 feature, you can view all your images at 
once and select which ones you want to print.
Display the print menu.
 
O Click [Print menu].
 
O If printing preparations are not complete (paper cassette 
and ink cassette inserted), you cannot click [Print 
menu]. Follow the on-screen instructions to perform the 
necessary operations.
 Select a print method.
 
O Click [Simple print].
 
O You can make prints with frames, stamps, and speech 
bubbles by clicking [Decoration print].
 
O You can make prints with calendars added by clicking 
[Calendar print].
 
O You can print multiple images on the same sheet by 
clicking [Layout Print].
 
O You can print in the size required for ID photos by 
clicking [ID Photo Print].
You can display images saved in another folder by pressing 
this button and selecting a folder from the screen that 
appears.
You can select the criteria for 
images to display.
Select one or more images.
 
X Images will display in an index within the [Pictures] 
folder.
 
O Click an image to select for printing.
 
X The background color changes and the 
image is set for printing.
 
O Use the same procedure to click all images 
you want to print.
 
O If you click an image again, the background 
color switches back to the original color 
and the settings are canceled.
 
O Once images are selected, click [Next].
1
 2
3