Canon Selphy Cp810 User Guide

							11
  Setting the Display Language
You can change the language displayed in the LCD monitor menus and messag\
es. The default setting is English.
  Turn on SELPHY.
 
O Press and hold the  q button until the screen shown at 
left displays.
 
O To turn the power off, press and hold the  q button and 
release when the screen display changes.
Approx. 45°
Raise the screen (LCD monitor).
 
O Do not raise the LCD monitor more than 45° as this may 
result in damage or malfunction.
  Display the settings screen.
 
O Press the k button.
 
O Press the ud buttons to select [Change Settings], and 
then press the o button.
Display the language settings screen.
 
O Press the ud buttons to select a [  Language], and 
then press the o button.
 Select a language.
 
O Press the udlr buttons to select a language, then 
press the o button.
 
O You can go back to Step 2 if you press the v button 
twice.
1
2
3
4
5
 
						

							12
 Compatible Memor y Cards and Memor y Card Slots
Card SlotsMemory Cards That Can be Used 
Without an AdapterMemory Cards That Require an Adapter  (commercially available)
SD/MMC +
 
OSD Memory Card 
O SDHC Memory Card
 
O SDXC Memory Card 
 
O MultiMediaCard
 
O MMCplus Card
 
O HC MMCplus Card  
O miniSD Memory Card
 
O miniSDHC Memory Card  
OmicroSD Memory Card 
OmicroSDHC Memory Card 
OmicroSDXC Memory Card 
ORS-MMC Card *1 
OMMCmobile Card 
O MMCmicro Card
CF/microdrive
 
O CF Card  
O Microdrive  
O xD-Picture Card *2
*1 “RS-MMC” is an abbreviation of “Reduced-Size Multi Media Card”\
.
*2 Operations were confirmed with the adapter DPC-CF manufactured by Fujif\
ilm Corporation.
 
O For memory cards that require an adapter, be sure to first insert the memory card into the adapter 
before inserting into the appropriate card slot. 
If you insert the memory card into a card slot without using an adapter, you may not be able to 
remove the memory card from the printer.
 
O Use a memory card formatted in the device used for taking the images. A memory card formatted 
on a computer may not be recognized.
 
O Refer to the user guide included with your memory card and adapter for h\
andling instructions.
About USB Flash Memor y
You can print images on a commercially available USB flash memory by conn\
ecting it to SELPHY  (p.  15).
  Images That Can Be Printed
JPEG images conforming to the Exif standard can be printed with SELPHY.
 
O Irregularly sized images, or images that have been edited on a computer \
may not display or print properly.
 
						

							13
  Selecting and Printing Images
You can select an image and specify the number of copies for printing. In\
 this section, an SD memory card 
will be used as an example, but you can print from other memory cards us\
ing the same steps.
 Turn on SELPHY.
 
O Press and hold the  q button until the screen shown at 
left displays.
 
O To turn the power off, press and hold the  q button and 
release when the screen display changes.
Approx. 45°
Raise the screen (LCD monitor). 
 
O Do not raise the LCD monitor more than 45° as this may 
result in damage or malfunction.
Label side
  Insert a single memory card into the slot.
 
O Insert the card faced as shown in the illustration until it 
clicks. 
 
O To remove the card, push it in until it clicks and release 
your finger slowly. 
 
O If you are using a CF/microdrive card, insert it fully into 
the appropriate slot.
 
X The screen in Step 4 below (image display screen) 
(p.  7) will display.
Number of copies for the 
displayed image
Number of copies
  Select an image.
 
O Press the lr buttons to select an image to print.
 
O Every 5th image will be displayed if you press and hold 
the lr buttons.
  Select the number of copies.
 
O Press the ud buttons to select the number of copies.
 
O If you press and hold one of the  ud buttons, the 
number increases or decreases by 5 copies.
 
O To print another image at the same time, repeat Steps 4 
and 5.
1
2
3
4
5
 
						

							14
  Print.
 
O Press the p button to start printing.
 
O During printing, the paper will pass in and out from the 
back of SELPHY several times. Do not touch the paper 
until printing has finished and the printed sheets collect 
on the print output tray (on the outer lid of the paper 
cassette).
 
O Do not let 19 or more printed sheets collect on the print 
output tray.
 
O During printing, always press the  v button to cancel 
printing. 
  Insert the paper.
 
O If the paper out message is displayed on the screen, pull 
the paper cassette out from SELPHY without turning off 
the power.
 
O Refill the paper cassette with new paper  (p.  8), and 
reinsert the cassette into SELPHY
 (p.  10).
  Change the ink cassette.
 
O If the ink out message is displayed on the screen, open 
the ink cover without turning off the power.
 
O The ink cassette will come out if you move the lock in 
the direction shown in the illustration. Insert a new ink 
cassette (pp.  7,  10)
.
 
O Never pull out the paper cassette, open the ink cassette compartment cov\
er, or remove the 
memory card while you can hear the printer’s operation sounds immediately after turning on the 
printer, or during printing. This may cause the printer to malfunction.
 
O Press the v
 button to cancel printing. You cannot cancel printing by pressing the ON button and 
the printer could be damaged if you unplug it to disconnect power.
 
O It may take some time before images are displayed on the screen in Step \
4 if the memory card contains a large 
number of images.
 
O If the [Start DPOF printing] screen displays, refer to “Printing Imag\
es Using Digital Camera Specified Settings 
(DPOF Print)” (p.  33).
 
O You can print up to 99 images at once and specify up to 99 copies per ima\
ge in Steps 4 and 5. However, you 
cannot specify more than 999 images  (p.  35).
 Avoiding Incomplete Photos
Note the following to avoid wasted remaining paper due to the ink sheet \
running out before completing a 
photo print.
 
O Do not turn the sprocket too much when tightening the ink sheet  (p.  7).
 
O Always press the v button when you want to cancel printing and never turn off the power before pressing 
the v button (Step 6).
 
O If the paper out message is displayed on the screen, refill the paper wi\
thout turning off the power (Step 7) 
or press the  v

 button to cancel printing (Step 6).
Depending on print conditions, you may not be able to avoid incomplete p\
hoto prints due to the ink sheet 
running out in some cases even if you follow the above instructions.
6
7
8
 
						

							15
  Printing From USB Flash Memor y
Just like images on memory cards, images on commercially available USB f\
lash memory can also be printed.
Insert a USB flash memory.
 
O Insert a USB flash memory as shown.
 
O All further steps are the same as those used for printing 
images from memory cards  (pp.  13 –  14).
 
O Depending on the brand of USB flash memory used, it may be difficult to insert or remove, and it may not 
operate properly.
 
O Refer to the user guide included with your USB flash memory for operatin\
g instructions.
Printing 1 Copy of  the Selected Image
You can print 1 copy of the selected image with simple operation.
Selecting and Printing an Image.
 
O Select the image as described in Steps 1 to 4 on  p.  13.
 
O Press the p button to print 1 copy of the selected 
image.
 
O If you have specified the image and the number of copies in Steps 4 to 5\
 on  p.  13, SELPHY 
will print as specified even if you carry out the above operations. Therefore, make sure that the 
number of copies is “0” in Step 4 on  p.  13 before trying this operation.
 
						

							16
  Printing All Images
You can print all images on a memory card at once.
Display the menu.
 
O Press the k button.
Display the settings screen.
 
O Press the ud buttons to select [Print All Images], then 
press the o button.
Number of 
sheets required
Number of 
images contained  in the card Number of copies
Select the number of copies.
 
O Press the ud buttons to set the number of copies.
Print.
 
O Press the p button to start printing.
 
O To cancel printing, press the  v button.
 
O If there are more than 1000 images on the card, only 999 copies will be \
printed in order of the most recent by 
shooting date.
 
O You can specify up to 99 copies in Step 3. However, you cannot specify a value if the number of images in the 
card multiplied by the value exceeds 999. 
(For example, if the card contains 100 images, you can specify up to 9 \
copies.)
1
2
3
4
 
						

							17
 Storing the Printed Photos
 
O When both edges of a print have perforations, you can remove the edges 
by bending them.
 
O Use an oil-based pen to write on prints.
 
O
To prevent discoloration, do not store prints in places subject to temper\
atures 
of over 40 °C (104 °F), humid or dusty places, or in direct sunl\
ight.
 
O Avoid the following actions as they may result in color change, color fad\
ing 
or color bleeding: Sticking any type of adhesive tape on a print surface\
, 
allowing print surfaces to come into contact with vinyl or plastic, appl\
ying 
alcohol or other volatile solvents to a print surface, or leaving the pr\
int surface tightly pressed against 
other surfaces or objects for prolonged periods.
 
O If you wish to mount prints in an album, select an album with photo cove\
rs made of nylon, polypropylene 
or cellophane.
 
O Color may change over time or depending on storage conditions. Canon ass\
umes no liability for 
color changes.
 Cleaning Up After Printing
  Turn off SELPHY (p.   11 ), then remove the memory card or USB flash memory.  Lower the screen (LCD monitor) flat for storage.  Unplug the power cord from the power outlet and disconnect the adapter p\
lug from SELPHY.
 
O If the compact power adapter is hot, wait until it has cooled down befor\
e you store it.
  Remove the paper cassette and close the paper cassette compartment cover\
. Keep the remaining paper 
inside the cassette and store the cassette in a dark, cool, and dry plac\
e free from dust.  
O Keep the ink cassette inside SELPHY.
 
O Store SELPHY horizontally, in a dark place free from dust. Dust and dirt may cause white lines on\
 
photos or cause the printer to malfunction.
 
O When you have more than one ink cassette, keep one inside SELPHY, and keep the other inside 
the original packaging or a bag to protect it from dust, and store it in\
 a dark place.
 
O When storing new paper and ink cassettes, leave them in unopened package\
s, and keep them in 
a dark place.
Maintaining the Printer
To prevent dust and dirt from causing lines on photos and to ensure the p\
rint quality, clean SELPHY regularly 
using the supplied cleaner unit  (p.  2) before printing and when changing the ink cassette. Note that the 
cleaner unit may not be included in some regions. 
Cleaning SELPHY.
 
O Remove the ink cassette if it is inserted.
 
O Insert the cleaner unit with the arrow side up as shown 
fully and then pull out. Repeat this several times.
 
O Store the cleaner unit in a bag to prevent dust after 
cleaning.
 
ODo not touch the white part of the cleaner unit as it will not clean as \
effectively. 
O Do not use any cleaning kits other than the supplied cleaner unit. Doing\
 so may cause the printer 
to malfunction.
 
O If lines still appear on photos after cleaning, contact a Canon Customer\
 Support Help Desk.
 
						

							18
 Cropping and Printing Images
You can crop and print part of an image.
Display the cropping screen.
 
O Select an image as described in Step 4 on  p.  13, press 
the EDIT button, and then press the o button.
 
X A cropping frame to indicate the range will be displayed.
Determine the range.
 
O The cropping frame switches between portrait and 
landscape each time you press the EDIT button.
 
O You can move the cropping frame by pressing the 
udlr buttons.
 
O You can enlarge the cropping frame by pressing the  - 
button and shrink it by pressing the  0 button.
Make the setting.
 
O Press the o button to set the cropping range and 
return to the image display screen.
 
X
 is displayed at the bottom left of the screen.
 
O The cropping range setting is not cleared by setting the 
number of copies to 0.
 
O To crop another image and print at the same time, repeat 
Steps 1 to 3.
Print the images.
 
O Print as described in Step 6 on  p.  14.
 
O If you want to change the cropping range after setting it, press the EDI\
T button in the image display screen, press 
the ud buttons to select [Adjust Cropping], and press the  o button to repeat Steps 2 to 3.
 
O If you want to cancel the cropping range after setting it, press the EDI\
T button in the image display screen, press 
the ud buttons to select [Reset Cropping], press the  o button to display the reset cropping screen, and then 
press the o button again.
 
O The cropping ranges are all cleared if you turn SELPHY off or remove the memory card before printing them.
 
O You can set up to 99 images with cropping ranges.
 
O You cannot crop images in [DPOF Print] and [Print All Images].
 
O You cannot crop images when you have selected [ 
 Index] or [  Shuffle] in [Page Layout] (p.  23).
 
O You cannot change the vertical and horizontal ratio of the cropping frame\
 on the screen.
 
O
You can change the number of copies by pressing the  ud buttons in the image display screen in Step 3. 
O The cropping range is cleared when printing is finished.
1
2
3
4
 
						

							19
Printing ID Photos
You can print your image as an ID photo. You can 
select the size from [Multi-size], [Standard]*, and 
[Custom].
Also, you can select 2 types of images to be printed 
on one sheet.
*  The Standard size conforms to the ICAO international standards.
Set to print ID photos.
 
O Press the k button.
 
O Press the ud buttons to select [ID Photo], and then 
press the o button.
Specify the ID photo size.
 
O Press the lr buttons to select the size, and then press 
the o button.
 
O If you have selected [Custom], press the ud buttons to 
select [Long Side], press the lr buttons to specify the 
length, then specify the length for [Short Side], and then 
press o again. The values which can be specified in 
[Short Side] change automatically according to the value 
you have specified in [Long Side].
 
O If you have selected [Multi-size], the size of the image to 
be printed is displayed. 
Select and print the images.
 
O Select the image by pressing the  lr buttons, and press 
the u button.  is displayed at the bottom right of the 
screen (up to 2 images).
 
O Press the 
EDIT button to set the cropping range  (p.  18).
 
O Print as described in Step 6 on   p. 14.
 
O The ID photo may not be accepted officially, depending on the institution the ID photo is required for. Please 
contact the appropriate institution for regulation details.
 
O You cannot use card size paper.
 
O [Borders] settings will be ignored.
 
O Settings are cleared when printing is finished.
 
O The date and file number will not be printed.
 
O If you have selected 2 types of images, these 2 types are printed in equ\
al numbers for the number of columns in 
the layout.
 
O If you have selected 2 types of images and the number of columns is an o\
dd number, nothing will be printed in 
the center column.
1
2
3
 
						

							20
Crop the image for the passport.
 
O If you display the cropping range  (p.  18) while the 
[Standard] size is selected for [ID Photo], 2 lines are 
displayed.
 
O Adjust so that one line is at the top of the head and the 
other line is under the chin to print a passport photo 
conforming to the passport standards.
 
O Please contact the appropriate institution for regulation details other \
than regarding position and size of the face.