Lexmark X940e Owners Manual
Have a look at the manual Lexmark X940e Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Repair information4-279 7510 Go Back Previous Next 3Check the gear teeth on the following parts for damage: • Left transfer belt lift assembly plunger (B) • Right transfer belt lift assembly plunger (C) • Transfer belt lift handle (D) Are the gear teeth on any of these parts damaged?Replace the appropriate assemblies. See “Left transfer belt lift assembly removal” on page 4-23 or “Transfer belt drive motor assembly removal” on page 4-93. Need correct links.Go to next step. 4Check for damage to the plastic guides on the following parts: • Left transfer belt lift assembly plunger • Right transfer belt lift assembly plunger Are the plastic guides on any of these parts damaged?Replace the appropriate assemblies. See xxx, xxx, or xxx.Go to next step. Step Check Yes No
4-280Service Manual 7510 Go Back Previous Next 5The transfer belt alignment must be correct on both sides for proper operation. The top of the transfer belt (E) and the top of the right side cover (F) must be parallel, as shown in the following image. The metal edge at the top of the registration frame assembly (G) must be parallel to the top of the transfer belt (H), as shown in the following image: Is the transfer belt alignment correct?Go to next step. Replace the appropriate assembly. See xxx, xxx, or xxx. Step Check Yes No E F G H
Repair information4-281 7510 Go Back Previous Next 6The timing marks must be aligned for proper operation. Check the timing marks (E) located on the following components: • Left transfer belt lift assembly plunger • Right transfer belt lift assembly plunger • Transfer belt lift handle Are the timing marks aligned correctly?The transfer belt lift mechanism is adjusted correctly.Perform the transfer belt lift adjustment. See xxx, xxx, and xxx. Step Check Yes No
Connector locations5-1 7510 Go Back Previous Next 5. Connector locations Locations
5-2Service Manual 7510 Go Back Previous Next Scanner LVPS card assemblyCCD/lens card assembly Switch (platen interlock) Scanner controller card assembly
Connector locations5-3 7510 Go Back Previous Next Waste toner agitator motor assembly Sensor (waste toner cartridge full) Switch (waste toner cartridge interlock)
5-4Service Manual 7510 Go Back Previous Next Image density sensor assembly Duplex unit assembly Printer left door assembly
Connector locations5-5 7510 Go Back Previous Next Thumb screws Fuser unit assembly K toner add motorC toner add motor M toner add motor Y toner add motor Main power switch activator Switch (main power)
5-6Service Manual 7510 Go Back Previous Next Printhead Polygon mirror motor