Lexmark X940e Owners Manual
Have a look at the manual Lexmark X940e Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Repair information4-169 7510 Go Back Previous Next Sensor (document tray width 3) removal 1. Open the ADF left cover assembly. 2. Lift the document tray assembly. 3. Remove the five screws securing the cover (A). 4. Remove the cover (A). 5. Remove the two screws securing the bracket (B). 6. Remove the bracket (B). 7. Remove the connector from the sensor (document tray width 3) (C). 8. Release the hooks securing the sensor (document tray width 3) (C). 9. Remove the sensor (document tray width 3) (C). Note: The sensor (document tray width 1), sensor (document tray width 2), or the sensor (document tray width 3) are all identical. A B C
4-170Service Manual 7510 Go Back Previous Next Sensor (document tray length 1) removal 1. Open the ADF left cover assembly. 2. Lift the document tray assembly. 3. Remove the five screws securing the cover (A). 4. Remove the cover (A). 5. Remove the connector from the sensor (document tray length 1) (B). 6. Release the hook securing the sensor (document tray length 1) (B). 7. Remove the sensor (document tray length 1) (B). Note: The sensor (document tray length 1) and the sensor (document tray length 2) are identical. A B Connector
Repair information4-171 7510 Go Back Previous Next Sensor (document tray length 2) removal 1. Open the ADF left cover assembly. 2. Lift the document tray assembly. 3. Remove the five screws securing the cover (A). 4. Remove the cover (A). 5. Remove the connector from the sensor (document tray length 2) (B). 6. Release the hook securing the sensor (document tray length 2) (B). 7. Remove the sensor (document tray length 2) (B). Note: The sensor (document tray length 1) and the sensor (document tray length 2) are identical. A B Connector
4-172Service Manual 7510 Go Back Previous Next 2000-sheet dual input (TTM) removals 2000-sheet dual input (TTM)—top cover removal 1. Pull out tray 2 assembly. 2. Remove the two screws securing the top cover (A). 3. Remove the top cover (A). 2000-sheet dual input (TTM)—foot cover removal 1. Pull out the TTM media tray 3 assembly. 2. Pull out the media tray 4 assembly. 3. Remove the two screws securing the foot cover (A) to the machine. A
Repair information4-173 7510 Go Back Previous Next 4. Remove the foot cover (A). 2000-sheet dual input (TTM)—right cover removal 1. Remove the four screws securing the right cover (A). 2. Remove the right cover (A) by lifting up and out. A Front
4-174Service Manual 7510 Go Back Previous Next 2000-sheet dual input (TTM)— tray module left cover removal 1. Remove the four screws securing the tray module left cover (A). 2. Remove the tray module left cover (A). 2000-sheet dual input (TTM)—rear cover removal 1. Remove the four screws securing the rear cover (A). 2. Remove the rear cover (A). 2000-sheet dual input (TTM)—caster removal 1. Remove the media tray 2. 2. Remove the tray module left cover. See “2000-sheet dual input (TTM)— tray module left cover removal” on page 4-174. 3. Remove TTM media tray 3 assembly. See “2000-sheet dual input (TTM)—TTM media tray 3 assembly removal” on page 4-178. 4. Remove media tray 4 assembly. See “2000-sheet dual input (TTM)—TTM media tray 4 assembly removal” on page 4-177. 5. Place the right side of the drawer down. 6. Remove three screws securing the caster (A). A
Repair information4-175 7510 Go Back Previous Next 7. Remove the caster (A). 2000-sheet dual input (TTM)—tray support roll removal 1. Remove the tray module left cover. See “2000-sheet dual input (TTM)— tray module left cover removal” on page 4-174. 2. Remove TTM media tray 3 assembly. See “2000-sheet dual input (TTM)—TTM media tray 3 assembly removal” on page 4-178. 3. Remove media tray 4 assembly. See “2000-sheet dual input (TTM)—TTM media tray 4 assembly removal” on page 4-177. 4. Remove the foot cover. See “2000-sheet dual input (TTM)—foot cover removal” on page 4-172. 5. Remove the two screws securing the two brackets (A). 6. Remove the two E-clips securing the tray support rolls (B) to the two brackets (A) using a prying tool. 7. Remove the two E-clips securing the tray support rolls (B) to the main frame (C). Front B D AE-clip
4-176Service Manual 7510 Go Back Previous Next 8. Remove the shafts (D). 9. Remove the tray support rolls (B).
Repair information4-177 7510 Go Back Previous Next 2000-sheet dual input (TTM)—TTM media tray 4 assembly removal 1. Pull out the TTM media tray 4 assembly. 2. Remove the two screws securing the TTM tray 4 media transport assembly (A) to the TTM media tray 4 assembly (B). 3. Push the TTM tray 4 media transport assembly (A) into the machine in the direction of the arrow. 4. Remove the two screws securing the TTM tray 4 stopper (C) to the lower part of TTM media tray 4 assembly (B). 5. Remove the TTM tray 4 stopper (C). 6. Remove the TTM tray 4 assembly (B). A C B B
4-178Service Manual 7510 Go Back Previous Next 2000-sheet dual input (TTM)—TTM media tray 3 assembly removal 1. Remove the tray module left cover. See “2000-sheet dual input (TTM)— tray module left cover removal” on page 4-174. 2. Open the TTM left door assembly. 3. Loosen the screw securing the TTM tray 3 stopper (A). 4. Move the TTM tray 3 stopper (A) out in the direction of the arrow while pulling out the TTM media tray 3 assembly (B). 5. Remove the TTM media tray 3 assembly (B). 2000-sheet dual input (TTM)—tray 3 front cover removal 1. Pull out the TTM media tray 3 assembly. 2. Remove three screws securing the tray 3 front cover (A) to TTM media tray 3 assembly (B). 3. Remove the tray 3 front cover (A). 4. Remove the four screws securing the bracket (C) to the TTM media tray 3 assembly (B). 5. Remove the bracket (C). AB C