Lexmark X940e Owners Manual
Have a look at the manual Lexmark X940e Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Repair information4-199 7510 Go Back Previous Next 2000-sheet dual input (TTM)—sensor (media out) removal 1. Remove the tray module left cover. See “2000-sheet dual input (TTM)— tray module left cover removal” on page 4-174. 2. Remove the TTM media tray 3 assembly. See “2000-sheet dual input (TTM)—TTM media tray 3 assembly removal” on page 4-178. 3. Remove the TTM media tray 4 assembly. See “2000-sheet dual input (TTM)—TTM media tray 4 assembly removal” on page 4-177. 4. Remove the tray 4 media transport assembly. See “2000-sheet dual input (TTM)—TTM tray 4 media transport assembly removal” on page 4-182. 5. Remove the media feed unit assembly. See “2000-sheet dual input (TTM)—media feed unit assembly 2 removal” on page 4-190, “2000-sheet dual input (TTM)—media feed unit assembly removal (tray 3)” on page 4-190, or “2000-sheet dual input (TTM)—media feed unit assembly removal (tray 4)” on page 4-186. 6. Remove the media out actuator. See “2000-sheet dual input (TTM)—media out actuator removal” on page 4-197. 7. Disconnect the connector from the sensor (media out) (A). 8. Release the hooks securing the sensor (media out) (A) to the media feed unit assembly. 9. Remove the sensor (media out) (A). Front Harness A Hooks Lower viewHook
4-200Service Manual 7510 Go Back Previous Next 2000-sheet dual input (TTM)—feed roll removal 1. Remove the media tray assembly. 2. Move the feed unit front guide (A) toward the front in the direction of the arrow. 3. Release the hook securing the feed roll (B) to the shaft (C). 4. Remove the feed roll (B). Note: Do not touch the rubber surface of the feed roll (B). Replacement note: Before re-installing, do not touch the rubber surface of the feed roll (B).
Repair information4-201 7510 Go Back Previous Next 2000-sheet dual input (TTM)—feed roll one-way clutch removal 1. Remove the media tray assembly. 2. Remove the feed roll. See “2000-sheet dual input (TTM)—feed roll removal” on page 4-200. 3. Remove the feed roll one-way clutch (A) from the shaft (B).
4-202Service Manual 7510 Go Back Previous Next 2000-sheet dual input (TTM)—one-way 22 tooth removal 1. Remove the media tray assembly. 2. Remove the feed roll. See “2000-sheet dual input (TTM)—feed roll removal” on page 4-200. 3. Remove the feed roll one-way clutch. See “2000-sheet dual input (TTM)—feed roll one-way clutch removal” on page 4-201. 4. Remove the feed roll one-way gear 22 tooth (A).
Repair information4-203 7510 Go Back Previous Next 2000-sheet dual input (TTM)—separation roll one-way friction clutch removal 1. Remove the media tray assembly. 2. Remove the separation roll. See “2000-sheet dual input (TTM)—separation roll removal” on page 4-204. 3. Remove the separation roll spacer (A). 4. Remove the separation roll one-way friction clutch (B).
4-204Service Manual 7510 Go Back Previous Next 2000-sheet dual input (TTM)—separation roll removal 1. Remove the media tray assembly. 2. Move the feed unit front guide (A) toward the front in the direction of the arrow. 3. Release the hook securing the separation roll (B) to the shaft (C).
Repair information4-205 7510 Go Back Previous Next 4. Remove the separation roll (B). Note: Do not touch the rubber surface of the feed roll (B). Replacement note: Before re-installing, do not touch the rubber surface of the separation roll (B).
4-206Service Manual 7510 Go Back Previous Next 2000-sheet dual input (TTM)—pick roll removal 1. Remove the media tray assembly. 2. Move the front guide (A) toward the front in the direction of the arrow. 3. Release the hook securing the pick roll (B) to the shaft (C). 4. Remove the pick roll (B). Note: Do not touch the rubber surface of the feed roll (B). Replacement note: Before re-installing, do not touch the rubber surface of the pick roll (B).
Repair information4-207 7510 Go Back Previous Next 2000-sheet dual input (TTM)—left door assembly removal 1. Remove the tray module left cover. See “2000-sheet dual input (TTM)— tray module left cover removal” on page 4-174. 2. Open the TTM left door assembly. 3. Remove the two screws securing the two support straps (A) to the machine. 4. Remove one screw securing the bracket (B). 5. Remove the bracket (B). 6. Move the TTM left door assembly (C) to the front and out in the direction of the arrow. 7. Remove the TTM left door assembly (C). CB A
4-208Service Manual 7510 Go Back Previous Next 2000-sheet dual input (TTM)—switch (TTM left door interlock) removal 1. Open the TTM left door assembly. 2. Remove the screw securing the support strap (A) to the machine. 3. Remove the screw securing the bracket (B) to the machine. 4. Remove the bracket (B). 5. Disconnect the two connectors from the switch (TTM left door interlock) (C). 6. Remove the two screws securing the switch (TTM left door interlock) (C) to the bracket (B). 7. Remove the switch (TTM left door interlock) (C).