Xerox Workcentre 24 Pcl 6 Manual

							1–29
USER GUIDE (COPIER)
You can select several 2 Sided options from the Basic Copying tab 
or use the Added Features tab. 
1On the Basic Copying tab select More… under 2 Sided.
2Select the desired option: 
•1 to 1 Sided 
•1 to 2 Sided 
•Select Head to Head for two-sided, head-to-head output, 
as for books.
•Select Head to Toe for two-sided, head-to-toe output, as 
for calendars. 
						

							1–30
USER GUIDE (COPIER)
•2 to 2 Sided 
Select the option for your Originals
•Head to Head if your originals are two-sided, head-to-
head.
•Head to Toe if your originals are two-sided, head-to-toe.
Select the option for your Copies
•Head to Head for two-sided, head-to-head output, as for 
books.
•Head to Toe for two-sided, head-to-toe output, as for 
calendars.
• 2 to 1 Sided 
•Select Head to Head if your originals are two-sided, head-
to-head.
•Select Head to Toe if your originals are two-sided, head-
to-toe.
3Select the icon that most closely resembles the Original 
Orientation for the loaded document(s). 
4Select Start to make copies or Close to select additional features. 
NOTE:1 to 2 Sided or 2 to 2 Sided cannot be selected when using 
Auto Size Detect for Tray 5 (Bypass), Repeat Image, Book 
Duplex, Transparency Separators, Poster, or Booklet Creation. 
						

							1–31
USER GUIDE (COPIER)
Reduce/Enlarge
The Reduce/Enlarge feature allows you to copy the image at 
different magnifications. Copies may be reduced to 25% or 
enlarged to 400%, in 1% increments.
The following options are available:
100%Copies are the same size as the original. This is the default 
setting.
Auto%This option automatically reduces or enlarges the copy, based on 
the size and orientation of the document and the paper supply 
selected. This option is applied only to standard size documents.
The copy image will be reduced or enlarged in the same 
proportions for X (horizontal) and Y (vertical) directions.
Auto Paper selection is not available when Auto% is selected.
Presets%There are 7 preset percentages to choose from. The selected 
percentage displays in the value box on the Reduce/Enlarge 
screen.  These presets can be changed in System Settings mode. 
						

							1–32
USER GUIDE (COPIER)
Va r i a b l e %Select the Variable% option to enter the desired percentage for 
Reduce/Enlarge. Use either the up and down arrows or the 
number buttons that display on the Touch Screen. 
Independent X-Y%Select the Independent X-Y% option to copy the image at 
different, independent magnifications from 25% to 400% for the X 
and Y directions.
For example, you can enlarge the image to 129% in the X 
direction and reduce it to 64% in the Y direction by using the 
Touch Screen arrows.
Independent X-Y% AutoThe Auto option automatically calculates the reduction and 
enlargement based on the original document size and on the 
output paper size when using Independent X-Y%. The copy image 
will be reduced or enlarged in the different proportions for X and Y 
directions.
You can select several Reduce/Enlarge options from the Basic 
Copying tab or select the More… button to get a complete set of 
options.
Using Presets%
1On the Basic Copying tab select More… under Reduce/Enlarge. 
2On the Reduce/Enlarge screen, select the Presets% option. 
3Select 100%, Auto%, or the desired preset percentage. 
4Select Start to make copies or Save to select additional features.  
						

							1–33
USER GUIDE (COPIER)
Using Variable%
1Under Reduce/Enlarge on the Basic Copying tab select More… 
2On the Reduce/Enlarge screen, select the Variable% option. 
3Perform one of the following: 
• Press the arrow buttons to increase or decrease the 
percentage value in increments of 1. 
• Use the Numeric Keypad on the Touch Screen to enter a 
specific percentage from 25 through 400.  Press the Clear (C) 
button to clear the value entered. 
4Select Start to make copies or Save to select additional features.  
						

							1–34
USER GUIDE (COPIER)
Using Independent X-Y%
1Under Reduce/Enlarge on the Basic Copying tab select More… 
2On the Reduce/Enlarge screen, select the Independent X-Y% 
option. 
3Perform one of the following: 
• Press the up arrow to increase the percentage value for X, 
X&Y, or Y in increments of 1. 
• Press the down arrow to decrease the percentage value for X, 
X&Y or Y in decrements of 1. 
•Press Auto.
4Select Start to make copies or Save to select additional features.    
						

							1–35
USER GUIDE (COPIER)
Paper Supply
The Paper Supply option enables you to select output paper size 
and type.
The Basic Copying tab displays the Auto Paper selection feature. 
This option enables the copier to automatically detect the original 
document size and select the same standard size paper from 
Trays 1,2, 3, or 4.
The Basic Copying tab also displays the contents of three other 
trays enabling you to specify your selection for output size. The 
Paper Supply More… button enables you to access the Paper 
Supply screen.
The paper size displayed for Trays 1, 2, 3, and 4 is set when you 
adjust the paper guides as part of the process of loading paper. 
The paper type for the trays can be set in System Settings mode.
You may select both the paper size and paper type on the detail 
screen when loading paper into Tray 5 (Bypass).
1On the Basic Copying tab under Paper Supply, select one of the 
following:
•Select Auto to enable the copier to automatically select the 
appropriate paper. 
•Select More… to display the Paper Supply screen. 
2If More... is selected, select the tray that displays the desired 
paper.
3Select Start to make copies or Save to select additional features.  
						

							1–36
USER GUIDE (COPIER)
Programming the Paper Supply for Tray 5 (Bypass)
You must select the paper size and paper type when loading 
paper into Tray 5 (Bypass).  Auto Size Detect can be used with 
standard size paper. 
1On the Basic Copying tab select More… under Paper Supply.
2Select Tray 5 (Bypass) to display the Tray 5 (Bypass) screen.
3Perform one of the following to select Paper Size: 
•Select Auto Size Detect. 
•Select Standard Size. 
• Select the paper size from the list. Use the up and down 
arrows to see more selections.
•Select Non-standard Size and enter in the X (width) and Y 
(length) dimensions by using the arrows.
• Press the left or right arrows to decrease or increase the X 
dimension (140-483mm). 
• Press the up or down arrows to increase or decrease the Y 
dimension (100-305mm). 
						

							1–37
USER GUIDE (COPIER)
4Select the appropriate Paper Type using the up and down arrow 
buttons. You can select Plain, Bond, Recycled, Transparency, and 
Lightweight - Extra Heavyweight paper.
5Select Save to return to the Paper Supply screen.
6Select Start to make copies or Save to select additional features. 
NOTE:Paper Tray 5 cannot be used with the following features: 
Auto Size Detect with 1 to 2-Sided and 2 to 2-Sided, Auto 
Reduction/Enlargement, Auto Center, Corner Shift, Negative 
Image, Mirror Image, Book Duplex, Booklet Creation, Multiple Up, 
Repeat Image, Bound Originals and Poster.  
						

							1–38
USER GUIDE (COPIER)
Added Features Tab
Below is a brief description of each feature available on the Added 
Features tab.  Each feature is explained in detail on the following 
pages.
2 SidedAllows you to select one or two-sided originals, with options for 
one or two-sided output. 
OutputEnables you to select the desired output order and destination of 
the output.
Margin ShiftEnables you to center a document image, shift the image to one 
edge or move the image to a specified edge of the output copy.
Border EraseAllows you to erase any undesired images around the border or 
center of a document.