Xerox Workcentre 24 Pcl 6 Manual

							1–69
USER GUIDE (COPIER)
1On the Output Format tab select Repeat Image.
2Select the desired option: 
•Off 
• Auto Repeat
•Variable Repeat 
• Press the up arrow to increase the number of images to 
print in a column, or press the down arrow to decrease the 
number.  The range is from 1 through 33.
• Press the up arrow to increase the number of images to 
print in a row, or press the down arrow to decrease the 
number.  The range is from 1 through 23.
3For Auto Repeat and Variable Repeat select the Image Layout for 
the output copy.
•Even: Centers all the images on the output copy.
•Bias: Places the images one after the other on the output 
copy.
4Select Start to make copies or Save to select additional features. 
NOTE:Repeat Image cannot be used with the following features: 
Auto Paper selection, Multiple Up, Bound Originals, Poster, Book 
Duplex, Covers, and Booklet Creation. 
						

							1–70
USER GUIDE (COPIER)
Poster 
This feature allows you to create a poster size reproduction of the 
original document by creating multiple images that can be trimmed 
and joined together after.  There will be a 10mm image overlap on 
the copies to allow for the trimming and joining required to 
assemble the copies into a poster.
When using this feature place the original on the Document Glass 
in the same orientation as the orientation of the paper loaded in 
the selected paper tray.  The DADF cannot be used.
The following options are available:
2 x 2The document is copied and divided onto a total of four sheets, 
two in the X direction and two in the Y direction.
3 x 3The document is copied and divided onto a total of nine sheets, 
three in the X direction and three in the Y direction.
4 x 4The document is copied and divided onto a total of sixteen sheets, 
four in the X direction and four in the Y direction. 
						

							1–71
USER GUIDE (COPIER)
1On the Output Format tab select Poster.
2Select the desired option: 
•2 x 2 
•3 x 3
•4 x 4 
3Select the desired Paper Tray.
4Select Start to make copies or Save to select additional features. 
NOTE:Poster cannot be used with the following features: Tray 5 
(Bypass), Auto Paper Tray selection, 1 to 2 Sided, 2 to 2 Sided, 
Multiple Up, Collated, Repeat Image, Bound Originals, Covers, 
Book Duplex, Transparency Separators, Booklet Creation, and 
Build Job. 
						

							1–72
USER GUIDE (COPIER)
Mirror Image/ Negative Image
When the Mirror Image feature is selected, the output copy 
appears as a mirror image reflection of the original document.  
The Negative Image feature reverses the colors of the whole 
document image.
NOTE:Negative Image cannot be used with Dual Color.
NOTE:When Negative Image is used with Border Erase, the 
Border Erase area becomes white.
1On the Output Format tab select Mirror Image/ Negative Image.
2Select the desired options:
•Select On or Off for Mirror Image. 
•Select On or Off for Negative Image.
3Select Start to make copies or Save to select additional features.  
						

							1–73
USER GUIDE (COPIER)
Scan Options Tab 
Below is a brief description of each feature available on the Scan 
Options tab.  Each feature is explained in detail on the following 
pages.
Original SizeEnables you to specify the size of the original document to be 
copied. 
Mixed Size OriginalsAllows you to place documents of mixed sizes into the DADF for 
copying.
Bound OriginalsAutomatically scans two adjoining pages of a bound document 
and copies them onto two separate sheets of paper.
Image RotationAutomatically rotates the image to match the copy output paper 
when the original orientation and the copy paper are different.
Original OrientationAllows you to indicate the top of the original so that your output will 
be oriented as desired.
Book DuplexAllows you to make two-sided copies from a bound original. 
						

							1–74
USER GUIDE (COPIER)
Original Size
Use the Original Size feature to specify the original document 
size.
The following options are available:
Auto DetectThe copier automatically recognizes the size of standard 
documents in the DADF or on the Document Glass.  This is the 
default setting.
Standard SizesSelect the document size from one of the 11 preset sizes. These 
presets can be changed in System Settings mode.  You must 
place the original on the Document Glass.
Non-standard SizesAllows you to manually enter the size of the document placed on 
the Document Glass.   
						

							1–75
USER GUIDE (COPIER)
1On the Scan Options tab select Original Size.
2Perform one of the following: 
•Select Auto Size Detect to have the copier identify the size of 
the original document.
• Select the appropriate size of the document from one of the 
preset size buttons.
• Enter the width (X) and length (Y) dimensions of the original 
document.
• Press the arrow buttons to decrease or increase the X and 
Y dimensions.  X dimensions range from 15 to 432mm in 1 
mm increments. Y dimensions range from 15 to 297mm in 
1 mm increments.
3Select Start to make copies or Save to select additional features.  
						

							1–76
USER GUIDE (COPIER)
Mixed Size Originals
This option allows you to place documents of standard mixed 
sizes into the DADF for copying.  When the Mixed Size Originals 
feature and Auto Paper selection are selected, the copier 
automatically identifies each document size and selects the 
appropriate paper tray.  You can also specify a paper tray so that 
all copies are made on the same size paper.
1On the Scan Options tab select Mixed Size Originals. 
2Select the desired option: 
•Off: when documents are all the same size.
•On: when documents are different sizes.
3Load the mixed size originals with one edge of every sheet aligned 
evenly against the top left corner of the DADF to avoid misfeeds.
4Select the icon that most closely resembles the Original 
Orientation for the loaded documents.
5Select Start to make copies or Save to select additional features. 
NOTE:Mixed Size Originals cannot be used with the following 
features: Covers, Transparency Separators, Multiple Up, Auto 
Repeat Image, and Booklet Creation.
NOTE: This feature is not available with a platen only 
configuration. 
						

							1–77
USER GUIDE (COPIER)
Bound Originals
The Bound Originals feature enables you to copy a bound 
document such as books, magazines, notebooks, or stapled sets.  
When this feature is selected, each page is copied onto a 
separate sheet of paper.
You must place your bound document face down in the upper left 
corner of the Document Glass.  The DADF cannot be used.
The following options are available:
OffThis is the default.
Left Page then RightCopies are made starting from the left page of a bound document.
Right Page then LeftCopies are made starting from the right page of a bound 
document.
Top Page then BottomCopies are made starting from the top page of a bound document.
Along with the Bound Originals feature, Center Erase is offered.  
This option allows you to remove the shadow caused by the 
center binding of bound documents when they are copied.  This 
corresponds to the Center Erase feature under Margin Shift. 
						

							1–78
USER GUIDE (COPIER)
1On the Scan Options tab select Bound Originals.
2Select the desired format: 
• Left Page then Right
• Right Page then Left 
• Top Page then Bottom
3Select which pages are to be copied:
• Both Pages
• Left Page Only
• Right Page Only
4Press the left and right arrows to decrease or increase the Center 
Erase amount from 0 to 50mm.
5Select Start to make copies or Save to select additional features.
NOTE:Bound Originals cannot be used with the following 
features: Auto Size Detect for Tray 5, Multiple Up, Repeat Image, 
Book Duplex, and Poster.