Xerox Workcentre 24 Pcl 6 Manual
Have a look at the manual Xerox Workcentre 24 Pcl 6 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1–109 USER GUIDE (COPIER) Machine Information 1Press Machine Status. The Machine Status screen is displayed. 2Select Machine Information. The Machine Information screen is displayed. 3The Serial Number will be displayed. 4Select Close to return to the Machine Status screen.
1–110 USER GUIDE (COPIER) Maintenance This section describes maintenance procedures that should be performed on your machine regularly. When replacing consumable items, such as Toner Cartridges, refer to the instructions included with the items for information on how to replace them. Cleaning the DADF and Document Glass Keep the DADF and Document Glass clean to ensure clean copies and acceptable copy quality. Clean the DADF and Document Glass as needed. 1Open the DADF document cover. 2Wipe off any dirt from the underside of the DADF document cover (belt section) with a dry cloth moistened with water. Wipe the cover with a soft, dry cloth until it is clean and dry. 3Wipe off any dirt from the document glass with a soft cloth moistened with water. Wipe in a lengthwise direction making sure to keep your fingers off the glass. Repeat until the Document Glass has no visible marks or streaks. 4Close the DADF document cover.
1 – 111 USER GUIDE (COPIER) Changing Toner Cartridges When a message is displayed to replace a Toner Cartridge, follow the instructions provided here in addition to those on the labels surrounding the cartridges. NOTE: When a message appears indicating that a Toner Cartridge is low, the color that is low will be shown. If additional cartridges are low, a more generic message will be displayed and you will not know which cartridges require replacement. Press the Machine Status button on the Control Panel, then select the Consumables tab to view the status of all the consumables. 1Open the Front Door of the printer/copier and locate the Toner Cartridges. From left to right the Toner Cartridge colors are Black, Cyan, Magenta, Yellow. 2Place a few sheets of paper on the floor under the Toner Cartridges to catch any toner that may spill. 3Remove the empty cartridge by rotating it counterclockwise until the arrow on the cartridge is aligned with the arrow and unlock position on the printer/copier.
1–112 USER GUIDE (COPIER) 4Pull the cartridge completely out of the printer/copier. Dispose of the cartridge according to local regulations. 5Remove the new cartridge from the box. 6Shake the cartridge from side to side. 7With the arrow on the cartridge facing upward, slide the cartridge into the printer/copier. 8Rotate the cartridge clockwise until the arrow on the cartridge is aligned with the arrow and lock position on the printer/copier.
1–113 USER GUIDE (COPIER) 9Close the Front Door of the printer/copier. 10Remove the sheets of paper on the floor under the Toner Cartridge, and dispose of them according to local regulations. CAUTION:Do not use warm or hot water, or cleaning solvents, to remove toner from your skin or clothing. This will set the toner and make it difficult to remove. If any toner gets on your skin or clothing, use a brush to remove the toner, blow it off, or wash it off with cold water and mild soap. CAUTION:If more than one Toner Cartridge needs to be replaced at the same time, be careful to place the new cartridges in their correct color locations.
1–114 USER GUIDE (COPIER) Machine Specifications Speed by Media Plain Paper (8.5x11 in./216x279mm LEF): • Black and white: 24 ppm • Color: 13 ppm Transparency: • Black and white: 11 ppm • Color: 5 ppm Heavyweight 1 (28 lb. bond to 65 lb. cover/106 to 169 gsm): • Black and white: 11 ppm • Color: 7 ppm Heavyweight 2 (65 lb. cover to 110 lb. index/170 to 220 gsm): • Black and white: 7 ppm • Color: 7 ppm
1–115 USER GUIDE (COPIER) Dimensions and Weight WorkCentre 24The dimensions are: 666 x 780 x 1145mm. Each size +/- 5mm. The weight is: 174kg. Finisher (optional accessory)The dimensions are: 300 x 590 x 945mm. Each size +/- 5mm. The weight is: 35kg.