Xerox Workcentre 24 Pcl 6 Manual
Have a look at the manual Xerox Workcentre 24 Pcl 6 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1–59 USER GUIDE (COPIER) Output Format Tab Below is a brief description of each feature available on the Output Format tab. Each feature is explained in detail on the following pages. Multiple UpAllows you to copy 2 or 4 images from multiple originals onto a single page. Transparency SeparatorsAllows you to insert blank paper separators between transparencies. Also copy sets can be made in conjunction with the transparencies. CoversAllows you to add covers to your copied sets using paper drawn from a different tray than your copies. Repeat ImageAllows you to copy a single image multiple times onto one page. PosterAllows you to create a poster size reproduction of the original document by creating multiple images that can be trimmed and joined together after. Mirror Image/Negative ImageEnables you to create negative, mirror or negative mirror images on your output copy.
1–60 USER GUIDE (COPIER) Multiple Up The Multiple Up feature enables you to copy 2 or 4 images from multiple originals onto a single page. NOTE:When using this feature place the originals in the DADF. NOTE:Depending on the size of the original, some image loss might occur along the edge of the image. The following options are available: 1 UpCopies one image on each output copy. 2 UpCopies two images on each output copy. 4 UpCopies four images on each output copy. NOTE: This feature is not available with a platen only configuration.
1–61 USER GUIDE (COPIER) 1On the Output Format tab select Multiple Up. 2Select the desired option: •1 Up •2 Up Select the desired Image Order: • Left to Right • Right to Left • Top to Bottom
1–62 USER GUIDE (COPIER) •4 Up Select the desired Image Order: • Horizontally from the upper left corner • Horizontally from the upper right corner • Vertically from the upper left corner • Vertically from the upper right corner 3Select the icon that most closely resembles the Original Orientation for the loaded documents. 4Select Start to make copies or Save to select additional features. NOTE:Multiple Up cannot be used with the following features: Auto Paper Tray Selection, Bound Originals, Book Duplex, Poster, Repeat Image, Booklet Creation, and Mixed Size Originals. NOTE:When Border Erase or Margin Shift is used with Multiple Up, the erase or shift amount is reflected on each original document.
1–63 USER GUIDE (COPIER) Transparency Separators When the Transparency Separators feature is used, the copier automatically inserts a blank sheet of paper between the transparency copies. In addition to the transparency set, you may also select copy sets. The following options are available: OffCopies are made without transparency separators. Blank SeparatorsA blank sheet of paper is inserted between every transparency. Only one set can be made. Separators + N SetsA blank sheet of paper is inserted between every transparency. In addition the quantity selected determines how many copy sets (N sets) will also be made as part of the job. No Separators + N SetsA transparency set is made without blank separators. In addition the quantity selected determines how many copy sets (N sets) will also be made as part of the job. NOTE:When using this feature, load transparencies into Paper Tray 5. Make sure that there is paper of the same size and orientation in another tray for the separators and/or copy sets. NOTE:Separators are blank sheets of paper and are not added to the Meter count.
1–64 USER GUIDE (COPIER) Selecting Blank Separators 1On the Output Format tab select Transparency Separators. 2Select Blank Separators. 3Select Paper Tray Settings. 4Select the size/orientation of the transparencies loaded in Tray 5 (Bypass). 5Select the paper tray to use for the Blank Separators. 6Select Start to make copies or Save to select additional features.
1–65 USER GUIDE (COPIER) Selecting Separators + N Sets 1On the Output Format tab select Transparency Separators. 2Select Separators + N Sets. 3Select Paper Tray Settings. 4Select the size/orientation of the transparencies loaded in Paper Tray 5. 5Select the paper tray to use for the Separators and N sets. 6Select Save. 7Select Start to make copies or Save to select additional features. NOTE:Transparency Separators cannot be used with the following features: Uncollated, Reduce/Enlarge, Covers, Booklet Creation, Book Duplex, and 2-Sided output.
1–66 USER GUIDE (COPIER) Covers This feature allows you to add covers to your copied sets, using paper drawn from a different tray than your copies. You can have blank or printed covers. The following options are available: No CoversNo Covers are added to the copy set. This is the default setting. Front CoversA Front Cover is added to the copy set with or without an image. Front & Back CoversA Front & Back Cover is added to the copy set with or without an image. To copy an image on only one side of the cover when making 2- Sided copies, insert a blank sheet in the original set of documents in the appropriate position before making copies.
1–67 USER GUIDE (COPIER) 1On the Output Format tab select Covers. 2Select the desired option: • No Covers • Front Covers • Front & Back Covers 3If you selected Front Covers or Front & Back Covers, select the desired Printed Covers option. 4Select Paper Tray Settings. 5Select the correct paper tray for the Body Pages and Covers. 6Select Save. 7Select Start to make copies or Save to select additional features. NOTE:Covers cannot be used with the following features: Uncollated, Repeat Image, Poster, Transparency Separators, Booklet Creation, and Auto Paper selection.
1–68 USER GUIDE (COPIER) Repeat Image The Repeat Image feature enables you to copy a single image multiple times onto one page. The following options are available: OffThis is the default setting, which produces only one image per output page. Auto RepeatThis option enables the copier to automatically determine the number of output images that will fit on a single page. Variable RepeatWith this option you can specify the number of images that will print on a single sheet by selecting the number of rows and columns.