Xerox Workcentre 24 Pcl 6 Manual

							1–79
USER GUIDE (COPIER)
Image Rotation
This feature allows the machine to automatically rotate the image 
so that the orientation of the document matches the output paper.
The following options are available:
OffThe copier will not rotate the image even if the orientation differs 
from the output paper.
Always OnThe copier will automatically rotate the image if the orientation 
differs from the output paper.
On during AutoThe copier will automatically rotate the image if the orientation 
differs from the output paper only when Auto Paper selection is 
selected, or Auto % is selected in Reduce/Enlarge.  If a specific 
paper tray is selected without Auto %, image rotation will not 
occur.
1On the Scan Options tab select Image Rotation.
2Select the desired option: 
•Off 
• Always On
•On during Auto 
3If using Mixed Size Originals, select Rotation Direction. Select 
the desired option:
• Portrait Original - Left Edge
• Portrait Original - Right Edge 
						

							1–80
USER GUIDE (COPIER)
4Select Start to make copies or Save to select additional features. 
NOTE:Image Rotation cannot be used with the following features: 
Auto Size Detect for Paper Tray 5, Repeat Image and Poster.
NOTE:When Booklet Creation is selected, Image Rotation occurs 
automatically regardless of the Image Rotation setting.
Original Orientation
The document orientation must be set to indicate the top of the 
original when using the following features: 2-Sided, Margin Shift, 
Border Erase, Multiple Up, Repeat Image, Mixed Size Originals, 
and Independent X-Y%.
Original Orientation is designed as follows:
Head to TopSelect this when placing the top of the document at the top of the 
DADF or Document Glass.
Head to LeftSelect this when placing the top of the document towards the left 
of the DADF or Document Glass. 
						

							1–81
USER GUIDE (COPIER)
Book Duplex
The Book Duplex feature enables you to make 2 Sided copies of a 
bound document such as books, magazines, notebooks, or 
stapled sets.
You must place your bound document face down in the upper left 
corner of the Document Glass.  The DADF cannot be used.
The following options are available:
Left Page then RightCopies are made starting from the left page of a bound document.
Right Page then LeftCopies are made starting from the right page of a bound 
document.
Top Page then BottomCopies are made starting from the top page of a bound document.
Along with the Book Duplex feature, Center Erase is offered.  This 
option allows you to remove the shadow caused by the center 
binding of bound documents when they are copied.  This 
corresponds to the Center Erase feature under Margin Shift. 
						

							1–82
USER GUIDE (COPIER)
1On the Scan Options tab select Book Duplex.
2Select the desired option:
• Left Page then Right
• Right Page then Left
• Top Page then Bottom
3Select Start Page & End Page and select the desired options. 
Press Save to return to the Book Duplex screen.
4Press the left and right arrows to decrease or increase the Center 
Erase amount from 0 to 50mm.
5Select Start to make copies or Save to select additional features. 
						

							1–83
USER GUIDE (COPIER)
Job Assembly Tab
Below is a brief description of each feature available on the Job 
Assembly tab.  Each feature is explained in detail on the following 
pages.
Stored JobsAllows you to program various feature settings in the built-in 
copier memory as a single job. 
Build JobAllows you to build a job using different settings for each page or 
segment of a job.
Booklet CreationAutomatically copies your originals such that the output set can be 
folded into a booklet. 
						

							1–84
USER GUIDE (COPIER)
Stored Jobs
The Stored Jobs feature allows you to program various feature 
settings in the built-in copier memory as a single job.  Up to 8 jobs 
can be stored and up to 18 characters can be entered for each job 
name.  This feature is especially helpful for complex jobs that you 
run frequently.
You can retrieve stored jobs and apply their programming features 
to a new copy job.  Deleting stored jobs frees that memory 
position for storing different jobs.
Storing a Job
1Program the features and options you want to save for future use.
2On the Job Assembly tab select Stored Jobs.
3Select Store.
4Select the desired icon to identify the job number.
5Select Enter/Change Name to name the job.
6Select the job number.
7Enter a name up to 18 characters long for the stored job and 
select Save.
8Select Close. 
						

							1–85
USER GUIDE (COPIER)
Deleting a Job
1On the Job Assembly tab select Stored Jobs.
2Select Delete.
3Select the job number you want to delete.
4Select the desired option:
•Ye s: to confirm the deletion.
•No: to cancel the deletion.
5Select Close.
You can now store a new job in place of the job you deleted.
Retrieving a Job
1On the Job Assembly tab select Stored Jobs.
2Select the job number you want to retrieve.
3Select Close.
4Select Start to make copies. 
						

							1–86
USER GUIDE (COPIER)
Build Job
Build Job enables you to program, scan, and store individual job 
segments of a large or complex job, and then print all the 
segments as one complete job.
1On the Job Assembly tab, select Build Job.
2Select On. 
3To make a sample set of your originals, select On for Sample Set. 
Select Save. 
4Load your originals for the first segment of the job.
5Set the desired features for the job and press Start.
6Check that Next Original is selected while the document is being 
copied. 
						

							1–87
USER GUIDE (COPIER)
7Load the next segment of the job, and set the desired features.
•Chapter Division - If you select Chapter Division, the next 
document will be copied onto Side 1, if 2 Sided is selected.
•Change Settings - Select Change Settings to change job 
features for the next segment of the job. When you select 
Change Settings, the Basic Copying screen is displayed. 
Select the desired features.
8Select Start. Repeat steps 5 through 7 for each job segment.
9Select Last Original after the last segment is scanned.
•Sample Set Off - If you selected Off for Sample Set, the entire 
job will be output.
•Sample Set On - If you selected On for Sample Set, one copy 
of the job will be output.
• Check the sample set, and select whether or not to output 
the remaining number of copies. Select Start. 
						

							1–88
USER GUIDE (COPIER)
Booklet Creation
This feature copies your originals to make a booklet. The 
maximum number of originals that can be used is 100.
If the number of originals is not a multiple of four, blank pages will 
be automatically added.
The following options are available to indicate binding location:
Left Bind / Top BindUse this for a booklet that will be bound in a left to right format or 
top to bottom format, such as a calendar.
Right BindUse this for output that will be bound in a right to left format.
1On the Job Assembly tab select Booklet Creation.
2Select the required binding location.
• Left Bind/Top Bind
• Right Bind
3Select Gutter if you want to add space in the center of your output 
for a gutter ranging from 0 to 50mm.
4Select Covers if you want to add a cover to the job.
5Select Originals to specify 1 or 2 Sided originals and their 
orientation.
6Select Start to make copies or Save to select additional features.
NOTE:Booklet Creation cannot be used with Auto Paper  
selection, Mixed Size Originals, 2 Sided, Uncollated, Multiple Up, 
Repeat Image, Poster, Covers, and Transparency Separators.