Xerox Workcentre 24 Pcl 6 Manual
Have a look at the manual Xerox Workcentre 24 Pcl 6 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2–77 USER GUIDE (PRINT) C. Special Printing Specifying Output Color for Printing in a PCL Driver You can specify the output color for printing. From the Output Color menu of either the Paper/Output or Graphics tab, select Black or Auto. Printing with Black To print in black and white, select Black from the Output Color menu.
2–78 USER GUIDE (PRINT) Print Mode Specify whether to give priority to the print speed or the image quality. The printer/copier is capable of printing at three different resolutions: High Speed: 600 x 600 Standard: 1200 x 600 High Quality: 1200 x 1200 To change resolution settings, use the Print Mode selections. NOTE: The Image Enhancement feature is not available when Standard or High Quality is selected. NOTE: If printing is slow even when High Speed has been selected, try setting Print Page Mode on the Configuration tab to On. The printing time may be shortened. Image Adjustment Mode The possible feature combinations of Print Mode and Output Color and other options of the Graphics tab are as follows: NOTE: When Black has been selected for Output Color, only Recommended can be selected for Image Adjustment. OptionsContents High SpeedPrints faster but with a loss of image quality. StandardThe average mode of High Speed and High Quality. High QualityPrints with better quality but slower OptionsContents RecommendedA unique system of our company to adjust image quality.
2–79 USER GUIDE (PRINT) Black & High Speed The possible feature combinations when Black for Output Color and High Speed for Print Mode have been selected: Graphics Options Image Adjustment ModeRecommended Image SettingsBrightnessAvailable ChromaNA ContrastAvailable Color BalanceBlackAvailable CyanNA MagentaNA YellowNA Profile SettingsColor Correction Temperature/ Gamma Available ICC ProfileAvailable Detailed Settings:Te x tChange All Colors to BlackAvailable GraphicChange All Colors to BlackAvailable Thicken Fine LinesAvailable Paint Only Enclosed AreasAvailable PhotoImage CompressionAvailable SmoothingAvailable High Speed Image ProcessingAvailable AllImage EnhancementAvailable Draft ModeAvailable ResolutionAvailable
2–80 USER GUIDE (PRINT) Black & Standard The possible feature combinations when Black for Output Color and Standard for Print Mode have been selected: Graphics Options Image Adjustment ModeRecommended Image SettingsBrightnessAvailable ChromaNA ContrastAvailable Color BalanceBlackAvailable CyanNA MagentaNA YellowNA Profile SettingsColor Correction Temperature/ Gamma Available ICC ProfileAvailable Detailed Settings:Te x tChange All Colors to BlackAvailable GraphicChange All Colors to BlackAvailable Thicken Fine LinesAvailable Paint Only Enclosed AreasAvailable PhotoImage CompressionAvailable SmoothingAvailable High Speed Image ProcessingAvailable AllImage EnhancementNA Draft ModeAvailable ResolutionAvailable
2–81 USER GUIDE (PRINT) Black & High Quality The possible feature combinations when Black for Output Color and High Quality for Print Mode have been selected: Graphics Options Image Adjustment ModeRecommended Image SettingsBrightnessAvailable ChromaNA ContrastAvailable Color BalanceBlackAvailable CyanX MagentaX YellowX Profile SettingsColor Correction Temperature/ Gamma Available ICC ProfileAvailable Detailed Settings:Te x tChange All Colors to BlackAvailable GraphICChange All Colors to BlackAvailable Thicken Fine LinesAvailable Paint Only Enclosed AreasAvailable PhotoImage CompressionAvailable SmoothingAvailable High Speed Image ProcessingAvailable AllImage EnhancementNA Draft ModeAvailable ResolutionAvailable
2–82 USER GUIDE (PRINT) 1Select Print from the File menu. 2Select the printer, and then select Properties. 3Select the Graphics tab. 4Select Black from the Output Color drop-down list. NOTE: You can also select from Output Color on the Paper/ Output tab. 5Select the mode from the Print Mode drop-down list box. 6Select OK. Printing with Auto AutoBefore printing, the printer can detect the colors on every document page, and then switch automatically to Color when colors other than black and white are used, and to Black when only black and white are used. Select Auto from the Output Color menu. Output Color RecognitionWhen this feature is checked, pages with only some degree of unevenness in color will be detected as black and white. When the box has not been checked, only pages with even degree of color will be detected as black and white. You can also configure the Print Mode, Image Adjustment Mode and Image Auto Correction settings. However, pages detected as black and white will be printed with the settings of Black mode. Display the Graphics tab to configure these settings.
2–83 USER GUIDE (PRINT) Print Mode Specify whether to give priority to the print speed or the image quality. The printer/copier is capable of printing at three different resolutions: High Speed: 600 x 600 Standard: 1200 x 600 High Quality: 1200 x 1200 To change resolution settings, use the Print Mode selections. NOTE: The Image Enhancement feature is not available when Standard or High Quality is selected. NOTE: If printing is slow even when High Speed has been selected, try setting Print Page Mode on the Configuration tab to On. The printing time may be shortened. OptionsContents High SpeedPrints faster but with a loss of image quality. StandardThe average mode of High Speed and High Quality. High QualityPrints with better quality but slower
2–84 USER GUIDE (PRINT) Image Adjustment Mode The available options in Image Adjustment mode are: • Recommended •ICM (System) NOTE: The ICM (System) setting is not available for Windows NT 4.0 Operating System. • CMS (Application) • Complimentary Color Conversion RecommendedWhen Recommended has been selected, select the image type from the Image Types list box. OptionsContents NormalPrints documents with a mixture of texts, graphs and photos, fast. PhotoReproduces photos and gradation more accurately. Suitable for printing of images in RGB. PresentationAdjusts colors vividly for printing. Suitable for presentation materials. Web PagesEffectively reproduces screen displays like web pages.
2–85 USER GUIDE (PRINT) ICM (System)Changes colors using the ICM feature of Windows 98, Windows Me, Windows 2000, and Windows XP. When ICM (System) has been selected, select the way of converting colors from the Indent list box. NOTE: Prior to using the ICC profile of this machine, register it on the Color Management tab of the print driver. CMS (Application)The print driver does not convert any colors. When printing from an application program with its own Color Management System (CSM), the print driver will receive instruction on color data converted according to the printer characteristics. In this case, select this item to prevent double color conversion by the print driver. Complementary Color ConversionSelecting this will enable the Auto Correction for you to select an option. OptionsContents SaturationConverts colors to improve the reproduction of graphics in presentation materials. PerceptualConverts colors to improve the reproduction of images like photos. ColorimetricReproduces suitably only colors that can be reproduced by the printer and converts others not within the reproduction range to other colors.
2–86 USER GUIDE (PRINT) Image Auto Correction When the document to be printed includes photo images, you can correct the image quality according to the special characteristics of the photo images. You can perform automatic correction according to the characteristics of the specified image type. NOTE: Image Auto Correction cannot be selected when ICM (System) or CMS (Application) has been selected for Image Adjustment Mode. The possible feature combinations of Print Mode, Image Adjustment Mode and other options of the Graphics tab are as follows: NOTE: ICM (System) only will be display in Windows 98, Windows Me, Windows 2000, and Windows XP. OptionsContents NormalCorrects imbalances in photo images like too bright or dark, or too greyish. Images with insufficient contrast and saturation will be automatically corrected. PortraitAutomatically corrects the brightness, contrast and saturation suitable for images of people. LandscapeAutomatically corrects the brightness, contrast and saturation suitable for images of scenery. MapAutomatically corrects maps and on- site photos to reproduce the text and detailed portions clearly.