Kyocera TASKalfa 300i User Manual
Have a look at the manual Kyocera TASKalfa 300i User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 73 Kyocera manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 308
Default Setting (System Menu)
8-76
Checking Application Details
Use the procedure below to check the details of an application.
1Press the System Menu key.
2Press [System] and then [Next] of Optional Function.
NOTE: If user login administration is di sabled, the user authentication scre en appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and...](http://img.usermanuals.tech/thumb/2828/37318/w64_Kyocera_TASKalfa_300i-307.png "Page 308
Default Setting (System Menu)
8-76
Checking Application Details
Use the procedure below to check the details of an application.
1Press the System Menu key.
2Press [System] and then [Next] of Optional Function.
NOTE: If user login administration is di sabled, the user authentication scre en appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and...")
Maintenance 9-3 9 Slit Glass/Dual scanning area If black streaks or dirt appears in copies when using the optional document processor, clean the slit glass with the supplied cleaning cloth. The message Clean the slit glass. may be displayed if the slit glass requires cleaning. When using the document processor to allow dual scanning, clean the dual scanning unit also. IMPORTANT: Wipe the slit gla sses with the dry accessory cloth. Do not use water, soap or solvents for cleaning. 1Remove the cloth from the cleaning cloth compartment. 2Open the document processor and wipe the slit glass (a). 3Wipe the white guide (b) on the document processor. 4Close the document processor top cover and return the cleaning cloth to the cleaning cloth compartment. 5Press [End]. Hold 1.Open the document processor. 2.Clean the surface of the slit glass located on the left side with th e supplied dry cloth. 3.Close the document processor and press [End]. Note that dirty glass and sheet may cause black streaks to appear in the output. Clean the slit glass. 02/03 End Status 08/08/2009 10:10 a b Downloaded From ManualsPrinter.com Manuals
Maintenance 9-4 Separator Clean the separator regularly (at least monthly) to ensure optimum output quality. 1Open the front cover. 2Remove cleaning brush (blue colored). 3Pull up and open left cover 1. 4As shown in the figure, clean dirt from the separator by moving the brush from side to side along the separator. Downloaded From ManualsPrinter.com Manuals
Maintenance 9-5 9 5Put away the cleaning brush, press the specified position of the front cover and left cover 1 to close. Transfer Roller 1 Open the front cover. 2Remove the cleaning brush (blue colored). 3Pull up and open left cover 1. Downloaded From ManualsPrinter.com Manuals
Maintenance 9-6 4As shown in the figure, clean dirt from the transfer roller by moving the brush from side to side along the roller while rotating the roller by turning the gear at the left end of the roller. 5Put away the cleaning br ush, press the specified position of the front cover and left cover 1 to close. Downloaded From ManualsPrinter.com Manuals
Maintenance 9-7 9 Toner Container and Waste Toner Box Replacement When the touch panel displays Add toner, replace the toner without delay even if several more copies are still possible. When replacing the toner containe r, replace the waste toner box as well. Every time you replace the toner container, be sure to clean the parts as instructed below. Dirty parts may deteriorate output quality. CAUTION: Do not attempt to incinerate the toner contai ner or the waste toner box. Dangerous sparks may cause burns. CAUTION: Do not attempt to force open or destroy the toner container or the waste toner box. 1Open the front cover. 2Remove the waste toner box. 3Peel the sticker off the waste toner box and remove the cap. Downloaded From ManualsPrinter.com Manuals
Maintenance 9-8 4Fit the cap into the opening in the waste toner box and attach the sticker over the cap. 5Place the used waste toner box in the provided plastic disposal bag. CAUTION: Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks may cause burns. CAUTION: Do not attempt to force open or destroy the toner container or the waste toner box. 6Grip the cleaner rod and slowly pull it out as far as it will go. Then push it back in. Repeat this procedure 2 or 3 times. CAUTION: Do not pull strongly on the rod or pull it out completely. Downloaded From ManualsPrinter.com Manuals
Maintenance 9-9 9 7Shift the main charger to the right and pull it out about 2 (5 cm). 8Take the grid cleaner provided out of its bag and remove the cap. 9Align the grid cleaner with the notch and attach it to the machine. 10While gently holding the grid cleaner in place with your left hand, pull the main charger out fully and then push it back to a position where the roller A does not quite reach the white pad on the grid cleaner. Repeat this procedure 2 or 3 times. CAUTION: When pushing the main charger back in, take care not to push it all the way in. This could result in damage to copies. A Downloaded From ManualsPrinter.com Manuals
Maintenance 9-10 11With the main charger pulled out about 2 (5 cm), remove the grid cleaner. Then push the main charger back in fully, applying pressure in the direction shown by the arrow so that the main charger is in its designated position. 12Install a new waste toner box. 13Remove the cleaning brush (blue colored). 14Pull up and open left cover 1 Downloaded From ManualsPrinter.com Manuals
Maintenance 9-11 9 15As shown in the figure, clean dirt from the separator by moving the brush from side to side along the separator. 16As shown in the figure, clean dirt from the transfer roller by moving the brush from side to side along the roller while rotating the roller by turning the gear at the left end of the roller. 17Put away the cleaning brush after the cleaning. Close the left cover 1 by pressing specified part. 18Open the Multi Purpose tray. Downloaded From ManualsPrinter.com Manuals
Maintenance 9-12 19Remove the filter. 20Remove dust from the filter using a vacuum cleaner or dry cloth. IMPORTANT: Do not wash the filter with water. Do not use the attached cleaning brush. 21Put the filters back in place and close the Multi Purpose Tray. 22Push the toner container stopper to the right and pull out the old toner container. WARNING: High voltage parts inside. Handle with care because there is a danger of electric shock. IMPORTANT: Do not pull the toner container all the way out without holding the handle, otherwise it will drop. Downloaded From ManualsPrinter.com Manuals