GTE Omni Si Database Technical Practices Manual
Have a look at the manual GTE Omni Si Database Technical Practices Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 3 GTE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
TL-130200-1001FAIII T cnnr n3 .=_POWER DOWN SYSTEM R&R EPCMN FB-J7217 IN Y/O9 (Check Strapping) POWER UPAND RELOAD 1MONITOR PSUPY FOR “ASW” TO LIGHT I NOREINSTALL ORIGINAL EPCMN CARD 1 R&R INCKS IN Y/i 1 (Check Strapping) POWER UPSYSTEMR&R Ml MB IN Y/O2 FB-17213-BOA (Check Strapping) 1MONITOR PSUPY FOR “ASW” TO LIGHT 1 REPLACEBATTERY PACK FUSE 52108187M-115
TL-130200-1001Fault Code 07Description: Disk ErrorBefore loading the system memory from the disk, the systemtests its memory (except common memory). The number of CRC errors is checked before loading. Register Data as System Prints:CECO CECO Fault 07 B C D E H L 00 xx 00 00 00 00 TNumber of CRC errors Fault Resolution Steps: 1.Determine number of CRC.errors identified in C register (ifless than 12 errors, disregard fault 07; if more, continue). :: Reload system -depress reset on PSUPY in P/01. Monitor PSUPY in P/O1 for ASW LED to light. 4.If fault recurs, power down system - turn off switch at rear of OMNI SI cabinet. 5.Remove and replace FMS in Y/07, FB-17220-BOA (check strapping). 6.Power up and reload system. 7.Monitor PSUPY in P/O1 for ASW LED to light. 8.If fault recurs, power down and reinstall original FMS card. 9.Remove and replace floppy disk drive.10. Power up and reload system. 11. Monitor PSUPY in P/O1 for ASW LED to light.
TL-130200-1001FAULT CODE 07DETERMINE NUMBER OF CRC ERRORS (C Register Value) - RELOADSYSTEM 1 MONITOR PSUPY FOR “ASW” TO LIGHT YES YESEXCESSIVE CRC EXCESSIVE CRC IEND cR&R FMSD IN Y/02 FB-I 7220-BOA (Check Strapping) 1POWER UP &RELOAD SYSTEM fPOWER DOWN &REINSTALL ORIGINAL FMS CARD 1 R&R FLOPPY DISK DRIVE II 52108187M-117
TL-130200-1001Fault Code 08Description: Network Test FailureThe system tests the PCM network connecting a time slot to itself; it then sends a test pattern through the network. This fault code indicates that a failure has occurred in the PCM network. Register Data as System Prints:_CECO CECO Fault 08 6 C D E H L Time Slot # PECFault Type Code: Number 00= PEC(s) did not respond (Always 0)02 = Test Failure Fault Resolution Steps: 1.Power down - turn off main circuit breaker at rear of OMNISI cabinet. 2.Remove and replace CHM85, FB-17218-A, in X/O1 and /or Y/l 5:(check strapping) - R + R X/O1 if time slot # is odd -R = R Y/l 5 if time slot # is even 3.Power up system. 4.Monitor PSUPY in P/O1 for ASW LED to light -approximately 15 seconds to warm start. 5.If fault recurs, power down and reinstall original CHM85 card. 6.Remove and replace , FB-17217-A in Y/O9 (check strapping). 7.Power up system. 8.Monitor PSUPY in P/O1 for ASW LED to light. 9.If fault recurs, power down and reinstall original EPCMN card. 10. Remove and replace INCKS in Y/l 1 (check strapping). 11. Power up system. 12. Monitor PSUPY in P/O1 for ASW LED to light. 13. If fault recurs, remove and replace cables between EPCMN and target CHM85 cards.
5210TL-130200-1001 FAULT CODE 08 FAULT CODE 08 FB-17218 IN Y/15 AND/OR X/O1 POWER UPSYSTEM 1MONITOR PSUPY FOR “ASW” TO LlG.HT 7 R&R EPCMNFB-17217 IN Y/O9 (Check Strapping) 1 POWER UPSYSTEM NOREINSTALL ORIGINAL R&R INCKS IN Y/l 1 (Check Strapping) POWER UPSYSTEM 1MONITOR PSUPY FOR “ASW” TO LIGHT I R&R CABLESBETWEEN EPCMN & CHM85 CARDS i INO .IENDl- 8187M-119
TL-130200-1001Fault Code 09Description: Directive TestA simulated directive is sent to test the hopper loaders and Malfunctionunloaders. This fault indicates that the system did not respond with the correct event. Register Data as System Prints:CECO CECO Fault 09 B C D E H L “i” O0 Y O0 O0 O0 PEC00 = System did not respond Numbercorrectly to directive test (Always 0)03 = System made an invalid response to the directive test Fault Resolution Steps: 1. 2. 3. 4. 5. 6. 7. a. 9. 10. 11. 12. ala7Remove battery pack fuse. Power down - turn off main circuit breaker at rear of OMNISI cabinet. Remove and replace Ml MB, FB-17314-1A in Y/O1 (check strapping). Power up and reload system - depress reset on PSUPY card Monitor PSUPY in P/O1 for ASW LED to light. If fault recurs, power down and reinstall original MlMB card. Remove and replace CPU85 FB-17288-A in Y/O4 (check strapping). Power up and reload system. Monitor PSUPY in P/O1 for ASW LED to light. If fault recurs, replace battery pack fuse, power down and reinstall original CPU85E card. Remove and replace MPB85, FB-17215-A in Y/O5 and X/O4 (check strapping). Monitor PSUPY card in P/O1 for ASW LED to light.5210
TL-130200-1001FAULT Cnl3F MlREMOVE BATTERY PACK FUSE rPOWER DOWN & REINSTALL ORIGINAL CPU85E CARD I POWiR DOWN SYSTEM II’(WeCk S I’ IIR&R MPB85 FB-172151 I11 1 R&R Ml MB FB-17314 IN Y/O1 (Check Strapping) 4 i-cIN Y/Cl4 & Y/O5POWER UP 8,(Check Strapping)RELOAD SYSTEM 1 4POWER UP MONITORSYSTEM PSUPY FORPOWER UP &“ASW” TO LIGHT 1 RELOAD SYSTEM MONITOR PSUPY FOR “ASW” TO LIGHT1 NO YES v ENDA REPLACE BATTERY PACK FUSE 52108187M-121
TL-130200-1001Fault Code 10Description: Directive Hopper FullThe hopper is tested to ensure that directives are being Malfunctionunloaded. This fault indicates that the system is failing to unload its directive.M-l 22 Register Data as System Prints:CECOCECO Fault10 B C D E H L @f0000000000PEC Number (Always 0) Fault Resolution Steps: 1. 2. 3. 4. 5. 6. 7. a. 9. 10. 11. 12. 13.Remove battery pack fuse. Power down - turn off main circuit breaker at rear of OMNISI cabinet. Remove and replace MlMB, FB-17314-lA, in Y/O1 (check strapping). Power up and reload system - depress reset on PSUPY card. Monitor PSUPY in P/O1 for “ASW” LED to light. If fault recurs, power down and reinstall original Ml MB card. Remove and replace CPU85 FB-17288-A in Y/O4 (check strapping). Power up and reload system. Monitor PSUPY in P/O1 for ASW LED to light. If fault recurs, replace battery pack fuse, power down and reinstall original CPU85E card. Remove and replace MPB85, FB-17215-A, in Y/O5 and X/O4 (check strapping). Power up system. Monitor PSUPY card in P/O1 for ASW LED to light.
TL-130200-1001 FAULT CODE 10.~.REMOVE BATTERY PACK FUSEPOWER DOWN SYSTEM R&R Ml MB FB-17314 IN Y/O1 (Check Strapping)POWER UP &RELOAD SYSTEM MONITOR PSUPY FORI“ASW” TO LIGHT II cPOWER DOWN &REINSTALL ORIGINAL Ml MB CARD iR&R CPU85EFB-17288 IN Y/O4 (Check Strapping) &POWER UP &RELOAD SYSTEM I4IMONITOR PSUPY FOR “ASW” TO LIGHT REPLACE BATTERY 1 PACK FUSEPOWER DOWN & REINSTALL ORIGINAL CPU85E CARD POWER UP .SYSTEM
TL-130200-I 001Fault Code 11Description: illegal Event ErrorThis fault is reported when the system receives an illegal value. MalfunctionThis fault indicates that the system has failed to respond correctly to a directive. M-l 24 81875210 Register Data as System Prints:CECO CECO Fault 11 B CDEH L PECEventEventEventEventNumber ParameterParameterParameter Number (Always 0) 1 23 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.Fault Resolution Steps: Remove battery pack fuse. Power down - turn off main circuit breaker at rear of OMNISI cabinet. Remove and replace Ml MB, FB-17314-IA, in Y/O1 (check strapping). Power up and reload system - depress reset on PSUPY card. Monitor PSUPY in P/O1 for ASW LED to light. If fault recurs, power down and reinstall original MlMB card. Remove and replace CPU85, FB-17288-A in Y/O4 (check strapping). Power up and reload system. Monitor PSUPY in P/O1 for ASW LED to light. If fault recurs, replace battery pack fuse, power down, and reinstall original CPU85E card. Remove and replace MPB85, FB-17215-A, in Y/O5 and X/O4 (check strapping). Power up system. Monitor PSUPY card in P/O1 for ASW LED to light.