GTE Omni Si Database Technical Practices Manual
Have a look at the manual GTE Omni Si Database Technical Practices Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 3 GTE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CPG ERROR MESSAGES TT-62l-l -01. . .Tl-02 Tl-02Tl-02 Tl-03 Tl-03Tl-03 Tl -04 Tl-04SVR 5210TL-130400-1001 Table 21.1 CPG Error Messages (Continued) TITLEESP CAN BE ‘Y’FOR ONLY ONE PORT .~.SECOND ELEMENT LESS l-HEN FIRST ELEMENT ELEMENT 2 IS MEANINGLESS SPECIFICATION 2ND FEATURE REQUIRED IF FIRST SPECIFIED ELEMENT HAVE NCOMPATIBLE dALUESELEMENT 2 IS MEANINGLESS SPECIFICATION ELEMENTS HAVE INCOMPATIBLE VALUES 2ND FEATURE REQUIRED IF FIRST SPECIFIED ELEMENT 2 IS MEANINGLESS SPECIFICATIONDESCRIPTION OF MESSAGES ESP ONLY ONE PORT CAN BE DESIGNATED AS THE ESP PORT.TRUNK GROUP -ALTERNATE TRUNK GROUP THESE TRUNK GROUP NUMBERS CANNOT BE EQUAL. TRUNK APPLICATION - DISPLAYABLE CLASS OF SERVICE, N-DISPLAYABLE CLASS OF SERVICE A CLASS OF SERVICE IS MEANINGFUL ONLY WHEN THE TRUNK APPLICATION IS ‘TIE’, ‘COT’, ‘FXT’, OR ‘WTS’, AND THE TRUNK DIRECTION IS ‘IN’ (INCOMING) OR ‘TW’ (TWO-WAY). THE CLASS OR SERVICE FIELDS FOR THESE TRUNK APPLICATIONS, HOWEVER, CAN BE DASHED. TRUNK APPLICATION ‘NIC’ MUST HAVE CLASS OF SERVICE DATA. TRUNK APPLICATION - TIE TRUNK CALLING NUMBER A TIE TRUNK CALLING NUMBER IS MEANINGFUL ONLY WHEN THE TRUNK APPLICATION IS ‘TIE’. THE TIE TRUNK CALLING NUMBER, HOWEVER, CAN BE DASHED. ELEMENTS HAVE INCOMPATIBLE VALUES 8187D-535
TL-130400-1001 CPG ERROR MESSAGESTable 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES Tl-04 . . .2ND FEATURETRUNK APPLICATION - TRUNK DIRECTION - ACD REQUIRED IF TRUNK PILOT NUMBER FIRST ACD TRUNK PILOT NUMBER CAN BE USED WITH ANY SPECIFIEDTRUNK APPLICATION IF THE TRUNK DIRECTION IS INCOMING OR TWO-WAY. THE FOLLOWING IS A LIST OF REQUIREMENTS: TRUNK ACD TRUNK APPLICATIONDIRECTION PILOT NUMBER CAS,CLR,COT,FXT, IN,TW0000-9999TIE OR WTS DIC,PAG,REC,NIC -- CAS,CLR,COT,OG,TW :::: FXT,TIE,OR VVTSTl-05ELEMENT 2 IS MEANINGLESS SPECIFICATION Tl-05ELEMENTS HAVE INCOMPATIBLE VALUES Tl-052ND FEATUREACD TRUNK PILOT NUMBER - TRUNK INCOMING REQUIRED IFSIGNAL FIRSTAN ACD TRUNK PILOT NUMBER CAN BE SPECIFIED SPECIFIEDONLY IF THE INCOMING SIGNALING FIELDS ARE DASHED. Tl-06INVALID TRUNK INCOMING SIGNAL CHARACTER(RETURN DIAL TONE - RETURN DISTINCTIVE DIAL PATTERN INTONE) 2ND FIELD ONE OR THE OTHER OF THESE FIELDS CAN BE SPECIFIED (‘Y’), BUT NOT BOTH. Tl-08ELEMENTS HAVE INCOMPATIBLE VALUES Tl-08ELEMENT 2 IS MEANINGLESS SPECIFICATION D-5368187SVR 5210
TL-130400-1001Table 21.1CPG Error Messages (Continued)PG ERROR IESSAGESTITLEDESCRIPTION OF MESSAGES Tl-082ND FEATUREBILLING MODE - TRUNK OUTGOING SIGNAL (MF) REQUIRED IFMF SIGNALING APPLIES ONLY TO CAMA BILLING ‘- FIRST MODE. -..SPECIFIEDTHUS, IF THE BILLING MODE IS SPECIFIED AS ‘CM’, THEN THE MF OUTGOING SIGNAL FIELD MUST BE ‘Y’. THE MF OUTGOING SIGNAL FIELD FOR ALL OTHER ,.BILLING MODE SPECIFICATIONS MUST BE DASHED. Tl-09ELEMENTS HAVE INCOMPATIBLE VALUES Tl-09ELEMENT 2 IS MEANINGLESS SPECIFICATION Tl-092ND FEATUREBILLING MODE - TRUNK DIRECTION REQUIRED IFWHEN THE BILLING MODE IS ‘CM’ (CAMA), THE TRUNK FIRSTDIRECTION MUST BE ‘OG’ (OUTGOING ONLY). SPECIFIED Tl-10ELEMENT 2 IS MEANINGLESS SPECIFICATION Tl-10 ELEMENTS HAVE INCOMPATIBLE VALUES Tl-10 Tl-112ND FEATUREBILLING MODE - AIOD CHANNEL REQUIRED IF FIRSTVALUE OFALLOWABLE VALUE OF SPECIFIEDBILLING MODE AIOD CHANNEL CM OR -- Al 1,2,3,4ELEMENT 2 IS MEANINGLESS SPECIFICATION Tl-11 ELEMENTS HAVE INCOMPATIBLE VALUES SVR 5210 8187D-537
TL-130400-1001 CPG ERROR MESSAGESTable 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES Tl-112ND FEATURE TRUNK DIRECTION -REQUIRED IF DISPLAYABLE CLASS OF SERVICE, FIRSTN-DISPLAYABLE CLASS OF SERVICE SPECIFIEDCLASS OF SERVICE MUST BE DASHES FOR TRUNK . . .DIRECTION OF ‘OG’. Tl-12 _ELEMENT 2 IS MEANINGLESS SPECIFICATION Tl-12ELEMENTS HAVE INCOMPATIBLE VALUES Tl-122ND FEATURE TRUNK DIRECTION-TRUNK INCOMING SIGNAL-REQUIRED IF TRUNK OUTGOING SIGNAL FIRST SPECIFIEDIF THE TRUNK DIRECTION IS ‘OG’ (OUTGOING ONLY), THEN THE TRUNK OUTGOING SIGNALING FIELDS MUST BE NONDASHED, AND THE TRUNK INCOMING SIGNALING FIELDS MUST BE DASHED. IF THE TRUNK DIRECTION IS ‘IN’ (INCOMING ONLY), THEN THE TRUNK INCOMING SIGNALING FIELDS MUST BE NONDASHED, AND THE TRUNK OUTGOING SIGNALING FIELDS MUST BE DASHED. IF THE TRUNK DIRECTION IS ‘TW’ (TWO WAY), THEN THE TRUNK INCOMING SIGNALING FIELDS MUST BE NONDASHED, AND THE OUTGOING SIGNALING FIELDS MUST BE NONDASHED. Tl-13 INVALIDMISSING DID DIGITS CHARACTERIF DIGIT 1 IS DASHED, THEN DIGIT 2 MUST BE PATTERN IN DASHED. 2ND FIELD Tl-14 ELEMENT 2 IS MEANINGLESS SPECIFICATION Tl-14 ELEMENTS HAVE INCOMPATIBLE VALUES D-5388187SVR 5210
TL-130400-1001 CPG ERROR MESSAGESTable 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES Tl-142ND FEATURE TRUNK APPLICATION - DISCONNECT SUPERVISION REQUIRED IF IF THE TRUNK APPLICATION IS ‘TIE’, F.!!RSTTHEN DISCONNECT SUPERVISION MUST BE ‘BT’. SPECIFIED . . . Tl-16DASHES MUSTTIE TRUNK CALLING NUMBER BE USED DASHES MUST BE USED CONSISTENTLY. CONSISTENTLY IN FIELD Tl-17 DASHES MUSTACD PILOT NUMBER BE USEDDASHES MUST BE USED CONSISTENTLY. CONSISTENTLY IN FIELD Tl-20 ILLEGAL VALUE TRUNK APPLICATION FOR TRUNK THE FOLLOWING FIELDS MUST HAVE CERTAIN APPLICATIONREQUIRED VALUES IF TRUNK APPLICATION IS ‘DIG’,‘PAG’, ‘REC’ OR ‘NIC’: FIELD NAME REQUIRED VALUE TRUNK DIRECTION --TRUNK INCOMING SIGNAL ----TRUNK OUTGOING SIGNAL ----TRUNK DISCONNECT SUPERVISION -- BILLING MODE --ALTERNATE TRUNK GROUP --TRUNK TRANSFER ALLOWED -TIE TRUNK CALLING NUMBER ---- AIOD CHANNEL MISSING DID DIGITS 1 & 2--ACD TRUNK PILOT NUMBER ----ACD TRANSLATION INDICATOR --ROUTE TO RLT ANSWER BACK R/A ACA OUTGOING TRUNK GROUP FRL TO ACCESS Tl-21ELEMENTS HAVE INCOMPATIBLE VALUE Tl-21ELEMENT 2 IS MEANINGLESS SPECIFICATION SVR 5210 8187D-539
TL-130400-1001 CPG ERROR MESSAGESTable 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES Tl-212ND FEATURE REQUIRED IF FIRST SPECIFIED Tl-21RECORDER TRUNK APPLICATION - R/A RETURN ANSWER BACK ANNOUNCERTHE R/A RETURN ANSWER BACK FIELD CAN BE NOT ALLOWEDSPECIFIED (‘Y’) ONLY IF THE TRUNK APPLICATION IS FOR TRUNK ‘REC.APPLICATION Tl-22Tl-23MF CAMA ONLYCAS TRUNK APPLICATION - TRUNK OUTGOING IS NOTSIGNAL ALLOWED FOR FOR TRUNK APPLICATION, ‘CAS’, OUTGOING SIGNAL TRK APPL CASMF (CAMA ONLY) IS NOT ALLOWED. AGENT GROUPTRUNK APPLICATION - AGENT GROUP NUMBER # MUST BE FOR TRUNK APPLICATION, ‘CAS’, AN AGENT GROUP SPECIFIED FORNUMBER MUST BE SPECIFIED. TRUNK APPLICATION CAS Tl-24SECOND TRUNK DIRECTION - TRUNK HOMING SELECTION ELEMENTIF TRUNK HOMING SELECTION IS SPECIFIED, CONTAINS THE TRUNK DIRECTION MUST BE ‘OG’ OR ‘TW’. INVALID VALUE Tl-25ELEMENTS HAVE INCOMPATIBLE VALUES Tl-25ELEMENT 2 IS ACA - ACA TOLERANCES MEANINGLESSIF THE ACA FIELD IS ‘Y’, THEN THE ACA TOLERANCE SPECIFICATIONFIELDS (ACA SHORT CALL THRESHOLD, INTERVAL, AND THE LONG CALL INTERVAL) MUST BE NOT BE DASHED. Tl-26 ELEMENTS HAVE INCOMPATIBLE VALUES Tl-26 ELEMENT 2 ISOUTGOING TRUNK GROUP FRL OUTPULSED - TRUNK MEANINGLESS DIRECTION SPECIFICATIONIF THE OUTGOING TRUNK GROUP FRL OUTPULSED IS ‘Y’, THEN THE TRUNK DIRECTION MUST BE ‘OG’ OR ‘TW’. D-5408l87SVR 5210
TL-130400-1001Table 21.1CPG Error Messages (Continued) DESCRIPTION OF MESSAGESINCOMPATIBLE THEN THE TRUNK DIRECTION MUST BE MEANINGLESS OING TRUNK GROUP FRL TO ACCESS IS HEN THE TRUNK DIRECTION MUST BE MEANINGLESS INCOMPATIBLE BER MUST BE UNIQUE DD RECORD.LASSES OF SERVICE SELECTED ROUP MUST BE INITIALIZED BY A THE N-DISPLAYABLE CLASSES OF SERVICE SELECTED FOR EACH TRUNK GROUP MUST BE INITIALIZED BY AN NC RECORD. REQUIREMENT PATTERNS OF -DISPLAYABLE CLASSES OF SERVICE FEATURESSEE APPENDIX 1. UIT SHOULD BE DEFINED ON THE FR SVR 52108187D-541
TL-130400-1001 CPG ERROR MESSAGESTable 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES Tl-57 Tl-59Tl-60INVALIDALTERNATE TRUNK GROUP ALTERNATE THE ALTERNATE TRUNK GROUP MUST BE DEFINED TRUNK GROUPAS A TRUNK GROUP ON A Tl AND T2 RECORD.i(ENDCHK) PILOT NO.IN ORDER FOR THE ACD FEATURE TO WORK BELONGS TOPROPERLY, IT IS MORE DESIRABLE TO USE A PILOT TERMINAL NUMBER FROM A CIRCULAR HUNT GROUP. HUNT GRP ‘o(GENTRK) INVALID PILOTTHE ACD PILOT NUMBER SHOULD BE A VALID PILOT NUMBER NUMBER ON AN HG RECORD, AN ATTENDANT CALLING NUMBER ON AN AT OR CN RECORD, OR A STATION NUMBER ON AN LD RECORD. (GENTRK) Tl-61TRUNK GROUPTRUNK GROUP NUMBER ACCESS ERROREACH TRUNK GROUP SHOULD BE MARKED FOR TRUNK GROUP ACCESS ON A DC RECORD IF THE TRUNK GROUP DIRECTION IS OUTGOING OR TWO-WAY. (ENDCHK) Tl-62CLASS OFTRUNK GROUP - DISPLAYABLE CLASS OF SERVICE SERVICE NOTCONFLICTS ALLOWEDAN INCOMING TRUNK GROUP IS RESTRICTED FROM HAVING CERTAIN FEATURES. THE FOLLOWING ARE THE ONLY FEATURES ALLOWED FOR TRUNK GROUPS WITH AN APPLICATION TYPE OF ‘COT’, ‘FXT’, OR ‘WTS’: 1. TRUNK GROUP ACCESS 2. DICTATION EQUIPMENT ACCESS (‘DA’) 3. STATION ACCESS (‘SA’) 4. RLT ACCESS (‘RL’) THE FOLLOWING ARE THE ONLY FEATURES RESTRICTED FROM ‘TIE’ TRUNK APPLICATION TRUNK GROUPS: 1. SWITCHED DIRECT LINE (‘SL’) 2. PROGRESSIVE CONFERENCE (‘PC’) D-542 8187SVR 5210
TL-130400-1001Table 21.1CPG Error Messages (Continued) DESCRIPTION OF MESSAGESSERVICE NOT ANINCOMING TRUNK GROUP ISRESTRICTEDFROM HAVING CERTAIN FEATURES. THE FOLLOWING ARE THE ONLY FEATURES ALLOWED FOR TRUNK GROUPS WITH AN APPLICATION TYPE OF ‘COT’ OR ‘FXT’: 1. ATTENDANT INFORMATION (‘Al’) 2. DATA LINE SECURITY (‘OS’)3. UNIVERSAL NIGHT ANSWER (‘UN’) 4. COMPUTER ACCESS (‘CA’) THE FOLLOWING ARE THE ONLY FEATURES ALLOWED FOR ‘WTS’ TRUNK APPLICATION TRUNK GROUPS: 1. DATA LINE SECURITY (IDS’)ALLOWED FOR ‘TIE’ TRUNK APPLICATIONTRUNK 1. ATTENDANT INFORMATION (‘Al’) 2. DATA LINE SECURITY (‘DS’) 3. UNIVERSAL NIGHT ANSWER (‘UN’) 4. COMPUTER ACCESS (‘CA’) FOR TRUNK APPLICATION,‘CAS’,STATION ACCESS IS REQUIRED IN THE TRUNK GROUP’S DISPLAYABLE CLASS OF SERVICE. THE FOLLOWING FEATURES ARE NOT ALLOWED IN THE TRUNK GROUP’S DISPLAYABLE CLASS OF SERVICE: 1. SWITCHED DIRECT LINE (‘SL’) 2. MODEM ACCESS (‘MD’) SVR 5210 $I87D-543
TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES THEN THE ASSOCIATED N-DISPLAYABLE CLASS OF SERVICE MUST NOT BE MARKEDFOR SPEED FOUND ON A Tl RECORD. THE TRU’NK GROUP SPECIFIED AS THE IDENTIFIER MUST BE DEFINED ON A TlRECORD. BE ‘DIC’, ‘PAG’, ‘REC, OR ‘NIC’ FOR THE TRUNK GROUP SPECIFIEDFOR VMS ANDMDUDIRECTORY ON RECORD FRL TO ACCESS MUST THEREFORE BE SPECIFIED FOR EVERY OUTGOING OR TWO-WAY TRUNK GROUP ON RECORD CODE Tl. Tl-72INCONSISTENTFRLS HAVE BEEN SPECIFIED FOR SOME PARTS OF ENGINEERINGTHE SYSTEM AND NOT OTHERS. OF FRLSENSURE THAT ALL ATTENDANTS, LINES, TRUNK GROUPS, MERS ROUTES, ETC. HAVE FRLS ENTIRELY ENABLED OR DISABLED. IN THE CASE OF TRUNK GROUPS, ALL OUTGOING OR TWO-WAY TRUNK GROUPS REQUIRE OUTGOING FRL TO ACCESS TO BE CONSISTENTLY ENGINEERED. D-544 8187SVR 5210