GTE Omni Si Database Technical Practices Manual
Have a look at the manual GTE Omni Si Database Technical Practices Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 3 GTE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
TL-130400-1001Table 7.1Entry Field for Record Code HG COL.COL.VALID NO.NAMEENTRIESCOMMENTS 12-15Hunt Group Pilot 0000-9999This field assigns the pilot number that is used Number ;00)-(999) =to access the hunt group. -When a pilot number is dialed, the hunt x-.”numberbegins for stations assigned on Record Code A three-digitMH. When the normally assigned directory number must havenumber of a station in a hunt group is dialed, a blank before it.hunting occurs only for hunt group types TMMP and CRMP. . -Every hunt group pilot number on this record code must have at least one member listed on Record Code MH. 16-19Hunt GroupTERMThis field determines the type of station hunt TypeCIRC(terminal or circular). TMCP-If terminal hunting is used, the hunt always CRCPbegins at the first station in the group and TMPIterminates at the last station in the group (if all CRPIstations are busy). TMMP-If circular hunting is used, the hunt begins at ~RMPthe next station following the station that answered the previous hunt call. -True ACD requires circular hunting. -Limited ACD groups can be assigned terminal hunting or terminal hunting with group camp-on. -If TMPI or CRPI is used, enter the recorder announcer on Record Code IR.TERM = terminal hunt CIRC = circular hunt TMCP = terminal hunt with group camp-on CRCP = circular hunt with group camp-on TMPI = terminal hunt with camp-on and pressure indicator with divert to a recorder announcer CRPI = circular hunt with camp-on and pressure indicator with divert to a recorder announcer TMMP = terminal hunt group with camp-on and pressure indicator with no divert to a recorder announcer CRMP = circular hunt group with camp-on and pressure indicator with no divert to a recorder announcer -The maximum number of circular hunt groups is 80.SVR 5210
TL-130400-1001Record Code MH:7.2 Record Code MH, Figure 7.2, defines the station member Hunt Groupdirectory numbers for the various hunt group pilot numbers. MembersThe order for call attempts to the hunt group members is also defined on this record code. This record code is used in conjunction with Record Code HG. -T-T-T-t-T-T-T-t-T-T-T-T-T-T-T-T-T-T-T-T-~-~-~-~-~-,I1 I1 I1 I1 II It I1 I1 I1 I1 1212121212121212121213131313131313131313l4l4l~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~-+-+-+-~-c-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-~1017111~I~I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I IL-~-*-~--~-~-~-~-*-~-~-~ * . 9 . . . . . . . . * * . * . . . . . * . -- Figure 7.2Record Code MH: Hunt Group Members Data Sheet -.-1I11’ I1,$1!I? II I )IJI ICI:IIC)II[?IIE- II I I I I I I I I I Ir-7 18 IIO Ic-iI IA--.8
COL.NO. 12-15 16-18I Hunt Sequence I Number 19-22I Member I Directory I Number IHunt Group Pilot INumber s-.” SVR 5210TL-130400-1001 Table 7.2Entry Fields for Record Code MH COL.NAMEVALID ENTRIES 0000-9999 =number or (000)(999) = number A three-digit number must have a blank before it. 000-255 = number 0000-9999 =number goo)-(999) =number A three-digit number must have a blank before it.COMMENTS This field assigns the pilot number of the hunt group.-Use phantom numbers for the pilot numbers; this saves the numbering plan for station numbers, -Phantom numbers can be defined on Record Code HD. -The hunt group pilot number must have been defined on Record Code HG. Start the sequence number within a hunt group with zero and continue in ascending order; no gaps are allowed. Make the member directory number a valid line or room number. -A directory number can only be in one hunt group.-A hunt group member cannot be an agent position. -Lines with the following class-of-service features should not be members of a hunt group:from COS Record Code DD, SL (Switched Direct Line) from COS Record Code NC, OR (Originating Only) -Members of a hunt group should not be given a divert condition, with the possible exception of the last member of the hunt group.-Divert conditions are defined on Record Codes LD and LM. 8187D-133
TL-130400-1001Record Code GC: Group Speed7.3 Record Code GC, Figure 7.3, defines the speed calling Callinggroups used by the system’. The directory numbers that make up this group or groups are listed on Record Code GS. This record code allows access to portions of or all of the system’s group speed calling list. This release allows up to a 1000 teleohonenumbers in the group speed calling list. . ,-----e-e---- ---,-----------~-----------------------------------------------I IiIr-s-r-T-T-t-s-t-T-T-+-~-~-t-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~- ~7~9~9,0,1121314151617181910,112,31415,6,718191011121314151617181910111,1,1,111,1,1,111,111,2,2,212,2,2,2,212,2~3,3l3~3~3~3~3~3~3~3,4~~~ c-+-+-+-u-,.-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-~lO,~lOlGlCI I I , I I I I I I I I I I I, I I I I I I I I I I I I I ! II.-*-A.-a--d-A.-A.-A-A-_L-A-- *. * --A-.4 Figure 7.3 Record Code GC: Group Speed Calling Data Sheet
LTL-130400-1001 Table 7.3Entry Fields for Record Code GC COL.COL.VALID NO.NAME ENTRIESCOMMENTS 12-13Group Number01-48 = numberThis field determines the group number for the list.-This number is used on Record Code LD when assigning the speed call list to users. 14-16Group Speed000-999 = number Calling ListColumns 14-l 9 determine the range of Entri-esentries in the group speed calling list that a (first entry) ‘-station user is allowed to access. Columns 14-16 are used to list the first entry, and columns 17-l 9 are used to list the last entry. -The range can be as small as a single entry or as large as the whole list. -If needed, several ranges can be listed for the same group. This is done by using the same group number on multiple records. -Ranges must be listed in multiples of four (e.g., 000-003 or 000-175). 17-19Group Speed000-999 = number Calling ListColumns 14-l 9 determine the range of entries in the group speed calling list that a Entriesstation user is allowed to access. Columns (last entry)14-16 are used to list the first entry, and columns 17-l 9 are used to list the last entry.SVR 5210 8187D-l 35
TL-130400-1001Record Code GS: Group Speed7.4 Record Code GS, Figure 7.4, defines the speed call Calling Listnumbers that make up the group speed calling list. The list can contain a maximum of 1,000 different numbers. Numbersr---------,--e-- I~----^-----------------------------,-----------------------~-~ ITI IxI II -I1I I I I5II II II II %aIIII I I Mt:CALLINGII IIICl I 101IIIIDIII!GIIIEIII1II I I’ RI II III I I I II III II I IIII IIII III I iI I III I:-;-;-;-T-T-T-~-T-~-~-~-~-~-~-~II I II1II III1 I1 I1 I1 Ill1II III II‘1 ‘2’~‘4~5~~~7~8~~‘,,‘, 121314151I r-T-T-+-T-t-T-T-I I ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~I1 Ii I1 I1 I1 I1 I1 I1 I1 I1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~:-:181 ~----U-~-t-t-t-t-t-t-t-t-t-:---------+-+-+-+-+-+-+-+-+-~0 t ;z;U;o; G SII I I I II I I I I I I I I I I I,--*-A-A.--L-A-A-A-~ . . . . . . . . . . * . . * * . * . . .I I---m-u Figure 7.4Record Code GS: Group Speed Calling List Numbers Data Sheet
TL-130400-1001Table 7.4Entry Fields for Record Code GSCOMMENTS 000-999 = numberThis fielddetermines thegroupspeedcalling -These digits should be filled in from left to right with no imbedded dashes. -This number must be unique across this record code. -This number must be listed on Record Code should these restrictions be in effect. accesscheck BT = bypass both access checksSVR 5210 8187D-l 37
TL-130400-1001 Record Code ED:Extended Dial Call7.5 Record Code ED, Figure 7.5, assigns pickup groups to Pickup Numb&sextended dial call pickup groups. The pickup groups that make up the extended dial call pickup groups are set up on this record code. Because the pickup groups are created on this record code, they are not redefined on Record Code LD. If a user is a member of an extended dial call pickup group, Record Code LD only lists the extended dial call pickup group to which the user belongs, not the dial call pickup group. The dial call pickup s-.”numbers should be filled in from left to right. ;---------,---,----------------------_---___~-----------------------------~-~TIIf I I I I I I1 PICKUPIGROUP(S)I I IICI I101IIDI’ IIEIT-----T-----I II II lI I I I I I I I I II I I I r-T-T-~-T-t-T-t-T-T-t-T-T-t-~-~-t-~-r-+-r-~-t-r-r-~-~-~-~-~-~-~-~I I;-:~7~8~91011121314151617181910111213141516171819101112131415161718191011111 1011111111111111111111112121212121212121212l3l3l3i3l3l3l3l3~3l~~~~~~~~ 181 t,t;t;t;;--t-~-t-t-:-t-:-t-:-t-:-t-:-t-t-’-’-’-t-‘-~ k-4 L-A-A.-~_I I II I I I I I I I I I I III~A-A-A-A-A_A_~-A . . . * . . . 8 * . . * . . * . . . . . . ~-~ Figure 7.5Record Code ED: Extended Dial Call Pickup Numbers Data Sheet
TL-130400-1001Table 7.5Entry Fields for Record Code EDCOMMENTS Table Numbers dial call pickup group to which that line call pickup groups, each containing a maximum of 5 pickup groups. -There is no limitation to the number of stations that make up a pickup group. -The table number must be unique across This field determines the pickup groups that make up the primary extended dial call pickup group. All members of this extended dial call make up the 2nd extended dial callpickup group.All members of this extended dial call up each other’s calls extended dial call make up the 4th extended dial call pickup group. All members of this extended dial call pickup group can pick up each other’s calls when they access the extended dial call pickup group feature.
TL-130400-1001Record Code CH:7.6 Record Code Cl-l, Figure 7.6, determines the feature or Change Feature by Access Codedestination that will be temporarily changed by the use of an access code. The line always diverts to the alternate destination whenever that route is accessed. What the feature or destination is temporarily changed to is also defined. The access code used to indicate this feature is set up on Record Code AC under code type numbers 50 (change/restore feature by access code) and 51 (change/restore feature routing). This feature is limited to one access code or one directory number per system. Y..”------r--r I-t-T-T-T-i i ii iir-r-T-t-t-T-T-t-T-T-s-+-T-t-T-T-t-T-T-T-t-T-T-~-~-~-~-~-~-~-~-~-~-, t-71819101111111111111111111212121212121212121213131313131313131313l4l4,4,7121314~516171819101112131415~617~819101112131415161718191011121181 -+-+-+-c~-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-~101C-4 gl,IoIcIHI I III I III \,I I I,,, 1 III I II I I II I I,, I I-L-L-~-L---L-~-*--L-~-*-~-*-~-~-~-~-~-*_~_~-~-~-~-*-~-~-*-*-A-A.-A.-A-A--- Figure 7.6Record Code CH: Change Feature by Access Code Data Sheet