GTE Omni Si Database Technical Practices Manual
Have a look at the manual GTE Omni Si Database Technical Practices Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 3 GTE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
TL-130400-1001 CPG ERROR MESSAGESTable 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES CP-53USE OF DEVICE TYPE - PHYSICAL LOCATION THE PEC, PHYSICAL LOCGROUP, SLOT AND CIRCUIT OF SOME DATA PORTS CONFLICTSMUST BE DEFINED ON AN LD RECORD. -rWITHDEVICE TYPE TERM MUST APPEAR ON AN LD -..INSTRUMENTRECORD WITH INSTRUMENT TYPE ‘DFPA’ OR ‘APM’. TYPE SPECIFIED DEVICE TYPE HOST MUST APPEAR ON AN LD ON LDRECORD WITH .-INSTRUMENT TYPE ‘DFPA’ OR ‘APM’. DEVICE TYPE X25 MUST APPEAR ON AN LD RECORD WITH INSTRUMENT TYPE ‘SPM’. DEVICE TYPE NIC MUST APPEAR ON A TC RECORD AS A MEMBER OF A NIC TRUNK GROUP. CP-54 CP-55DUPLICATEPHYSICAL LOCATION PHYSICALTHE PEC, GROUP, SLOT, AND CIRCUIT SPECIFIED LOCATIONMUST BE UNIQUE ACROSS ALL CP RECORDS. X.121 ADDRESS X.121 ADDRESS NOT IN ROTARYAN ASYNCHRONOUS PORT (DEVICE TYPE OF ‘TERM’ OR ‘HOST’) MUST BE PART OF AN ASYNCHRONOUS GROUP (ORDER ROTARY, ORdER DIRECT, RANDOM ROTARY, RANDOM DIRECT) DEFINED ON AN RT RECORD. (TABGENIGENDAT)CP-57 MPR MUST BEADMP OR MDR FIELD SPECIFIED ONIF THIS DATA PORT IS SPECIFIED AS INTERFACING TO RECORD CODETHE MDR PROCESSOR THEN MDR MUST BE OE AND PlEQUIPPED ON THE OE RECORD. THE MDR FIELD ON SYSTEM START-UP (MDR EQUIPPED) MUST BE ‘Y’ ON THE Pl RECORD. CP-58ONLY ONE MDRADMP OR MDR FIELD AND ONE ADMPTHE DATA PORT INTERFACING TO THE MDR X.121 ADDRESSPROCESSOR AND THE PSEUDO DATA PORT MAY BEINTERFACING TO THE ADMP MUST BE UNIQUE. SPECIFIED CP-59AN ADMP CARDADMP OR MDR FIELD MUST BEIF THIS DATA PORT IS SPECIFIED AS INTERFACING TO DEFINED ONTHE PSEUDO DATA PORT, THEN AN ADMP CARD RECORD CODEMUST BE DEFINED ON AN FR RECORD. FR(ADMPCK) SVR 5210 8187D-445
TL-130400-1001D-446 Table 21.1CPG Error Messages (Continued)DESCRIPTIONOF MESSAGES PORTS DEFINED ESS SPECIFIED MUST BE UNIQUE ACROSS ALL CP RECORD. IN ADDITION, THERE MUST BE NO CONFLICT BETWEEN THE TWELVE NUMERIC DIGIT X.121 ADDRESSES FOR SYNCHRONOUS DATA PORTS (DEVICE TYPES ‘X25’, ‘NIC’ AND ‘PX25’) AND THE FOURTEEN NUMERIC DIGIT X.121 ADDRESSES FOR ASYNCHRONOUS DATA PORTS (DEVICE TYPES ‘TERM’ AND‘HOST’) EN ROTARY MUST HAVE THE DCP SPECIFIED ON RECORD NED ON RECORD CODE FR SPECIFIED IN ADMP OR (ADMPCK) CP-82PHYSICALPHYSICAL LOCATION LOCATION ISEVERY DATA PORT APPEARING ON AN LD RECORD MISSING ONMUST ALSO APPEAR ON A CP RECORD. EVERY NIC NAMEDAPPEARING ON A TC RECORD MUST APPEAR ON A CP RECORD CODE RECORD. (ENDCHK) CR-01ENTRYAN ENTRY INTO THE CODE RESTRICTION TABLES ATTEMPTED INHAD BEEN ATTEMPTED, BUT THAT LOCATION AND BIT NONVACANTPOSITION WAS ALREADY FULL. THE ENTRY WAS NOT LOCATIONMADE. CHECK THE THREE DIGIT NPA/ABC CODE NUMBER IN THE DESIGNATED COLUMN AGAINST CODES PREVIOUSLY ENTERED IN THAT CODE RESTRICTION TABLE FOR A DUPLICATION. (TABGEN/GENDIG) 8187SVR 5210
TL-130400-1001 CPG ERROR MESSAGESTable 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES CR-02INVALIDAN INVALID SEQUENCE OF NPA/ABC CODES HAD SEQUENCEBEEN SPECIFIED TO BE ENTERED. Y-NO ENTRIES WERE MADE. -..CHECK THE SEQUENCE CONTAINING THE DESIGNATED COLUMN FOR A LOWER BOUND LESS THAN OR EQUAL TO THE UPPER BOUND. (TABGEN/GENDIG) CR-03 IMPRObERTHE CPG HAS DETERMINED THAT THE FIRST STARTING NPA/ABC CODE LISTED ON THE CODE RESTRICTION COLUMNRECORD IS NOT IN THE PROPER COLUMNS. PROPER TABLE GENERATION IS NOT GUARANTEED. (TABGEN/GENDIG)CR-04INVALIDTHE NPA/ABC CODE TO BE ENTERED IS NOT SYNTAXSTRICTLY NUMERIC AND CONVERSION FROM THE RECORD TO A VALUE HAD FAILED. (TABGEN/GENDIG) CR-05LASTA DASH (SIGNIFYING A SEQUENCE) IS FOLLOWED OPERATORONLY BY BLANKS. INVALIDCHECK FIRST TO VERIFY THAT A SEQUENCE WAS MEANT INSTEAD OF A SINGLE ENTRY AND, IF IT WAS, PROVIDE THE TERMINAL NUMBER OF THE SEQUENCE ON THE SAME RECORD. (TABGEN/GENDIG) CR-06INVALIDA CHARACTER OTHER THAN COMMA, DASH, OR OPERATORBLANK HAD BEEN USED IN AN OPERATOR’S POSITION IN THE DESIGNATED COLUMN. (TABGEN/GENDIG) CR-07MISPLACED BLANKA BLANK HAD BEEN USED IN AN OPERATOR’S LOCATION. A COMMA WAS ASSUMED. (TABGENIGENDIG) CT-01VALUES TO BEHEXADECIMAL EQUIVALENT BYTES FILLED LEFT TOHEXADECIMAL EQUIVALENT BYTES MUST BE FILLED RIGHT IN FROM LEFT TO RIGHT, WITH DASHED BYTES IN THE RIGHTMOST BYTES OF THE HEXADECIMAL BYTE FIELDS. CT-02INVALIDHEXADECIMAL EQUIVALENT BYTES CHARACTERIF ONE DIGIT OF A HEXADECIMAL EQUIVALENT BYTE PATTERN INIS DASHED, 2ND FIELDTHE THE OTHER DIGIT OF THE BYTE MUST BE DASHED. SVR 52108187D-447
TL-130400-1001Table 21.1CPG Error Messages (Continued) CPG ERROR MESSAGESTITLEDESCRIPTION OF MESSAGES CT-03 . . .CT-04 -FOR FUNCTIONFUNCTION CODE - HEXADECIMAL EQUIVALENT CODE, TNAM, BYTES BYTES l-8IF THE FUNCTION CODE IS ‘TNAM’, MAY NOT BETHEN THE HEXADECIMAL EQUIVALENT BYTES MAY SPECIFIEDNOT BE SPECIFIED. ELEMENT 2 IS MEANINGLESS SPECIFICATItjNCT-04ELEMENTSFUNCTION CODE - HEXADECIMAL EQUIVALENT HAVEBYTES INCOMPATIBLEIF THE FUNCTION CODE IS ‘TNAM’, VALUESTHEN THE CUSTOMER DEFINED TERMINAL NAME MUST BE SPECIFIED. IF THE FUNCTION CODE IS NOT ‘TNAM’, THEN THE CUSTOMER DEFINED TERMINAL NAME MUST BE DASHED. CT-50DUPLICATE TTYTERMINAL TYPE NUMBER - FUNCTION CODE NO. AND THE TERMINAL TYPE NUMBER AND FUNCTION CODE FUNCTIONCOMBINATION CANNOT BE DUPLICATED. CODE NOT ALLOWED CT-51 DA-01FCN CODES OFFUNCTION CODE CLSC , ABCC,THE FOLLOWING FUNCTION CODES ARE REQUIRED EEOL, AND FOR COMPLETENESS OF A CUSTOMER-DEFINED EEOPTERMINAL: ‘CLSC’, ‘ABCC’, ‘EEOL’, AND REQUIRED ‘EEOP’.(ENDCHK)INVALID FIRST DIGIT ACTIONS - SECOND PLUS DIGITS CHARACTER THERE MUST BE AT LEAST ONE ‘C’ ACROSS BOTH OF PATTERN INTHESE FIELDS. 2ND FIELD DA-02INVALID CHARACTER PATTERN IN 2ND FIELDFIRST DIGIT ACTIONS - SECOND PLUS DIGITS IF THERE IS AN ‘A’ ANYWHERE IN THE FIRST DIGIT ACTIONS, THERE MUST BE AT LEAST ONE ‘C’ IN THE SECOND PLUS DIGITS. DA-03INVALID FIRST DIGIT ACTIONS CANNOT BE ALL ‘R’. CHARACTER PATTERN IN 2ND FIELD D-4488187SVR 5210
TL-130400-1001 CPG ERROR MESSAGESTable 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES DA-51TRUNK GROUPTHE TRUNK GROUP SPECIFIED MUST HAVE A NOT FOUND CORRESPONDING Tl RECORD. DA-52 ‘;IDUPLICATETHIS NUMBER MUST BE UNIQUE ACROSS ALL DA. .TRUNK GROUP RECORDS. NUMBER y-51DUPLICATEDISPLAYABLE CLASS OF SERVICE NUMBER MUST BE DISPMYABLEUNIQUE ACROSS THE DC RECORDS. CLASS OF SERVICE DATA DC-53TRUNKGROUP ATRUNKGROUPREFERENCEDONADCRECORD NOT FOUNDWAS NEVER INPUT ON A Tl RECORD. (ENDCHK) DD-02 DD-51CLASS OFSWITCHED DIRECT LINE - CO LINE CONFLICT SERVICEIF CO LINE INDICATED (‘CL’), FEATURESTHEN SWITCHED DIRECT LINE (‘SL’) SHOULD ALSO BE CONFLICTINDICATED. DUPLICATEDISPLAYABLE CLASS OF SERVICE NUMBER MUST BE DISP. CLASS OFUNIQUE ACROSS THE DD RECORDS. SERVICE DATA (ENDCHK) DD-52CONFERENCEMEET ME CONFERENCE OR PROGRESSIVE ClRCUlTS NOTCONFERENCE, DEFINEDIF INDICATED, NEEDS ONE OF THE CONFERENCE CIRCUITS ON THE FR RECORD SPECIFIED. SVR 5210 8187D-449
TL-130400-1001Table 21.1CPG Error Messages (Continued)CPG ERROR MESSAGES CDD-53 DD-54 DK-53I DT-01 DT-01TITLE TOLL ACCESS -TRUNK GROUP ACCESS CONFLICT CLASS OF SERVICE NOT DEFINED _ DUPLICATE AGENT GROUP/ REPERTORY DIAL KEY NUMBER VALUE OF SECOND ELEMENT TOO SMALL VALUE OF SECOND ELEMENT TOO LARGEDESCRIPTION OF MESSAGES IF TOLL ACCESS IS INDICATED (‘TA’) THEN AT LEAST ONE TRUNK GROUP IN THE TRUNK GROUP ACCESS FIELD ON RECORD DC SHOULD BE ‘Y’.A DISPLAYABLE CLASS OF SERVICE REFERENCED ON THE DD RECORD MUST BE DEFINED ON A DC RECORD. EACH COMBINATION OF AGENT GROUP AND REPERTORY DIAL KEY NUMBER MUST BE UNIQUE. DTMF RECEIVER NUMBER - PEC REQUIREMENTS VALUE OFVALUE OF DTMF RECEIVERPEC o-7 8 -15 16-23 24-31 32-39 40-47 48-55 56-6301 2 3 4(SVR8.2.X.X.ONLY) 5(SVR8.2.X.X.ONLY) 6(SVR8.2.X.X.ONLY) 7(SVR8.2.X.X.ONLY) RECEIVER NUMBER - PEC REQUIREMENTS D-4508187SVR 5210
TL-130400-1001Table 21.1CPG Error Messages (Continued) ZPG ERROR MESSAGESTITLEDESCRIPTION OF MESSAGES DT-51CARD TYPE DEFINED ON FR INCOMPATIBLE Y-WITH FCN OF INCOMING CARD DT-51CARD TYPE DEFINED ON FR INCOMPATIBLE WITH INCOMING CARD TYPE DT-51FUNCTION OFPHYSICAL LOCATION CARD NOTTHE PEC, GROUP, SLOT AND CIRCUIT FUNCTION ALLOWED FORSPECIFIED IS INVALID FOR THE CARD TYPE DEFINED CARD TYPEON FR (FOR THIS PEC TYPE). DEFINED ONA DTMF RECEIVER CIRCUIT MUST APPEAR ON A FORM FRDTMF CARD. THE PEC, GROUP, SLOT AND CIRCUIT SPECIFIED IS NOT VALID FOR THIS PEC TYPE. (PHYLOC) IF THE CARD TYPE IN THE MESSAGE IS “OVER”, THAT INDICATES THAT A CARD IN THE PREVIOUS LOCATION IS A WIDE CARD AND IT OVERHANGS INTO THIS PYHSICAL LOCATION ON FR. DT-51PHYSICALPHYSICAL LOCATION LOCATION NOTTHE PEC, GROUP AND SLOT SPECIFIED WAS NOT DEFINED ONDEFINED ON FR. RECORD CODE (PHYLOC) FR DT-51 DT-51PHYSICAL LOCATION PREVIOUSLY FILLED CARD OVERHANGS INTO A PREVIOUSLY FILLED SLOTPHYSICAL LOCATION THE PEC, GROUP, SLOT AND CIRCUIT SPECIFIED FOR THE DTMF RECEIVER CIRCUIT MUST BE UNIQUE. (PHYLOC) THIS CARD IS AN OVERSIZED CARD AND IS TRYING TO FILL TWO SLOTS. OF THE TWO SLOTS IT FILLS, THE RIGHT HAND ONE HAS ALREADY BEEN FILLED. DT-51DUPLICATE DTMF RECEIVER NUMBERTHE DTMF RECEIVER NUMBER MUST BE UNIQUE ACROSS ALL DT RECORDS. SVR 5210 8187D-451
rTL-130400-1001ZPG ERROR MESSAGES Table 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES DT-57DUPLICATE DTMF RECEIVER NUMBERTHE DTMF RECEIVER NUMBER MUST BE UNIQUE ACROSS ALL DT RECORDS. DT-58PEC NUMBER THE PEC NUMBER SPECIFIED MUST BE MARKED NOT EQUIPPEDEQUIPPED ON THE OE RECORD. EC-01SECOND ‘-NPA CODES MUST BE UNIQUE ON A PER TABLE ELEMENT(ONE EC RECORD) BASIS EQUALS FIRST ELEMENT (NPA CODES) EC-03ELEMENTS HAVE INCOMPATIBLE VALUES EC-03ELEMENT 2 IS MEANINGLESS SPECIFICATION EC-032ND FEATURE 1 + RESTRICTION TABLE - RESTRICTION CODE TABLE REQUIRED IFONLY ONE OR THE OTHER OF THESE MAY BE FIRSTSPECIFIED FOR EACH NPA CODE ENTERED. SPECIFIEDBOTH CANNOT BE SPECIFIED. HOWEVER, BOTH MAY BE DASHED IF DESIRED EC-51DUPLICATE THE TABLE NUMBER MUST BE UNIQUE ACROSS THE CODE CHECK EC RECORDS. TABLE NUMBE EC-53CODE THESE TABLE NUMBERS MUST BE DEFINED ON A CR RESTRICTIONRECORD. TABLE NOT FOUND ED-01VALUES TO BEPICKUP GROUP NUMBERS SHOULD BE FILLED IN FILLED LEFT TOFROM LEFT TO RIGHT. RIGHT ED-51DUPLICATE THIS NUMBER MUST BE UNIQUE ACROSS THE ED EXTENDED DIAL RECORDS. CALL PICKUP TABLE D-4528187SVR 5210
TL-130400-1001 CPG ERROR MESSAGESTable 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES ED-52EXTENDEDEXTENDED DIAL CALL PICKUP TABLE PICKUP GROUPEACH TABLE NUMBER SHOULD APPEAR ON AN LD NOTRECORD IN THE EXTENDED DIAL CALL PICKUP TABLE s-REFERENCEDFIELD. -..ON LD FORM (ENDCHK) -FA-50DUPLICATE FRL AUTHORIZATION CODE DUPLICATE AUTHORIZATIO FRL AUTHORIZATION CODES ARE NOT ALLOWED. N CODE NUMBER FA-51FRLFRL AUTHORIZATION CODE AUTHORIZATIOTHE NUMBER OF FRL AUTHORIZATION CODE DIGITS N CODE OUT OFON FA RECORD MUST BE THE SAME, RANGEAS THE NUMBER OF FRL AUTHORIZATION CODE DIGITS SPECIFIED ON OF RECORD (FOUR TO SEVEN DIGITS). FA-51THREE HASH FRL AUTHORIZATION CODE BUCKETTHE ALGORITHM USED TO GENERATE THE FRL ENTRIES FILLED AUTHORIZATION CODE TABLE ENTRIES HAS DETECTED THE OCCURRENCE OF A FOURTH (OR FIFTH, SIXTH, SEVENTH, EIGHTH) CODE WITH THE SAME HASH VALUE. FOR INITIAL ENGINEERING THIS IS IN VIOLATION OF ADVERTISED FRL AUTHORIZATION CODE GENERATION REQUIREMENTS. FOR RE-ENGINEERING, THIS IS A POSSIBLE CONDITION. THE OCCURRENCE OF A FIFTH CODE WITH THE SAVE HASH VALUE WILL CAUSE AN ADDITION DISK ACCESS BY CALL PROCESSING. (FRLGEN) FA-51REACHEDFRL AUTHORIZATION CODE MAXIMUMTHE ALGORITHM USED TO GENERATE THE FRL BUCKET ENTRY, AUTHORIZATION CODE TABLE ENTRIES HAS RECORDDETECTED THE OCCURRENCE OF A NINTH (OR REJECTEDMORE) CODE WITH THE SAME HASH VALUE. (FRLGEN) FA-52INVALIDFA RECORDS WERE CODED FOR A SITE WITHOUT RECORD CODETHE TRAVELING CLASS MARK (TCM) FEATURE, I.E. THE TRAVELING CLASS MARK FIELD ON THE OF RECORD WAS DASHED OUT. FR-01ELEMENTS HAVE INCOMPATIBLE VALUES SVR 5210 8187D-453
TL-130400-1001ZPG ERROR MESSAGES Table 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES FR-01 . . FR-OiVALUE OF SECOND ELEMENT TOO LARGE VALUE OF CARD TYPE - PRIMARY, SECONDARY, TERTIARY SECONDIDENTIFIERS CONSULT THE CARD TYPES VS. ELEMENT TOOIDENTIFIERS, SMALL AND STATUS CHART TO DETERMINE APPROPRIATE VALUES TO SPECIFY FOR EACH PARTICULAR CARD TYPE. FR-02ELEMENTS CARD TYPE - PHYSICAL LOCATION HAVEIF THE CARD TYPE IS DTRK, THEN THE GROUP FIELD INCOMPATIBLEMUST BE ‘C’, SINCE Tl SPANS CAN ONLY BE VALUES INSTALLED IN THAT GROUP. SPECIFIC CARD PLACEMENT RESTRICTIONS ARE IN EFFECT FOR THE CARD TYPES OF BT, DCPB, PBE, PR AND RPTR. THESE CARDS MAY ONLY BE PLACED IN THE FOLLOWING GROUP/SLOTS: AOO, A02, AlO, BOO, B02, B09, C06, Cl 0, CO9, DOO, DO1 , Dl 0. FR-03VALUE dFSECOND ELEMENT TOO LARGE FR-03VALUE OFCARD TYPE-PEC SECONDTHE FOLLOWING CARD TYPE CAN APPEAR ONLY IN ELEMENT TOOPECS O-3: AGNT, AIOD, ART, ATTN, CONF, ERLT, SMALLKEDU, AND RLT. THE FOLLOWING CARD TYPE SPECIFIES THE VALID RANGE OF THE THREE IDENTIFIERS AND STATUS GIVEN A PARTICULAR CARD. CARD TYPES VS. IDENTIFIERS AND STATUS CHART VALUE ALLOWED ALLOWED ALLOWED STATUS OFCARD PRIMARY SECONDARY TERITIARY FIELD TYPEID RANGE ID RANGEID RANGE ADMP 0000-00010000-0001 ---- -- AGNT ---- ---------- D-4548187SVR 5210