GTE Omni Si Database Technical Practices Manual
Have a look at the manual GTE Omni Si Database Technical Practices Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 3 GTE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
TL-130400-1001Table 21.1CPG Error Messages (Continued) DESCRIPTION OF MESSAGESTHE CARD TO THE LEFT OF THIS SLOT IS AN OVERSIZED CARD. THE RIGHT HALF OF THAT CARD FILLS THIS SLOT. REQUIRED VALUES FOR THE ECORD DEPENDING ON THE TRUNK APPLICATION ON THE Tl RECORD: (Tl RECORD) DIC TC-66ILLEGAL VALUE FOR DIC, PAG, OR REC APPL TC-66ILLEGAL VALUEPHYSICAL TRUNK TYPE FOR TRUNKTHERE ARE CERTAIN REQUIRED VALUES FOR THE APPLICATIONPHYSICAL TRUNK TYPE FIELD ON A TC RECORD DEPENDING ON THE TRUNK APPLICATION INDICATED ON THE Tl RECORD: TRUNKPHYSICAL APPLICATIONTRUNK Tl RECORD)TYPE DIC PAGREC NIC LP LPEM EM OR LP SVR 5210 8l87D-525
TL-130400-1001ZPG ERROR MESSAGES Table 21.1CPG Error Messages (Continued)TITLE DESCRIPTION OF MESSAGES TC-67 ILLEGAL VALUE FOR DIC, PAG OR REC APPL ILiEGAL VALUESUPERVISORY INCOMING SIGNAL - SUPERVISORY FOR TRUNKOUTGOING SIGNAL APPLICATIONTHERE ARE CERTAIN REQUIRED VALUES FOR THE SUPERVISORY INCOMING SIGNAL AND THE SUPERVISORY OUTGOING SIGNAL DEPENDING ON THE TRUNK APPLICATION INDICATED ON THE TlRECORD (DEPENDING ON SVR). TC-68TRUNKSUPERVISORYSUPERVISORY APPLICATION INCOMINGOUTGOING (Tl RECORD) SIGNALSIGNAL DIC --ID OR -- PAG --ID OR -- REC --ID OR -- NIC --ID OR -- ILLEGAL VALUE TRUNK CARRIER FOR DIC, PAGTHERE ARE CERTAIN REQUIRED VALUES FOR THE OR REC APPLTRUNK CARRIER ON A TC RECORD DEPENDING ON THE TRUNK APPLICATION INDICATED ON THE TlRECORD (DEPENDING ON SVR): TC-69ILLEGAL VALUE FOR DIC, PAG OR REC APPTRUNK APPLICATION (Tl RECORD) DIC PAGRECTRUNK CARRIER AT OR -- AT OR -- AT OR -- TC-69ILLEGAL VALUECO TRUNK NUMBER FOR TRUNKIF THE TRUNK APPLICATION ON A Tl RECORD IS APPLICATION‘DIC’, ‘PAG’, ‘REC’ OR ‘NIC’ THEN THE CO TRUNK NUMBER MUST BE DASHED. TC-71ILLEGAL VALUE FOR DIC, PAG OR REC APPL D-5268187
TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTIONOF MESSAGES EQUIRED VALUES FOR THE ON A TC RECORD DEPENDING ON THE TRUNK APPLICATION INDICATED ON THE TlRECORD (DEPENDING ON SVR): APPLICATIONGUARANTEED ACCESS SPECIFIED MUST BE DASHES FOR ‘, ‘DIG’, ‘PAG’, ‘REC’ SIGNAL FORRECORD IS ‘FA’ (FAST ACCESS TRUNK), FAST ACCESSTHEN THE TRUNK INCOMING SIGNAL FOR ITS TRUNK GROUP ON THE Tl RECORD MUST BE ALL DASHED A TRUNK APPLICATION ID SOURCE GROUP Y OUTGOING SIGNAL OF ‘ID’, OR ‘SO’ MUST HAVE DIAL TONE RETURNED AS ‘Y’ ON RECORD TlSVR 5210 8187D-527
TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES PNA MUST HAVE A CLASS OF ES STATION ACCESS ON D TCFOR THE SAMELINEDIRECTORY HAVING A DISPLAYABLE CLASS OF SERVICE WITH ’ (CO LINE) SHOULD BE SPECIFIED ON TC AS A CO E DIRECTORY NUMBER. BUT THE TRUNK D Tl WAS NOT ‘COT’ BE CONTINOUSMUST BE NUMBERED IN SEQUENTIAL ORDER BEGINNING WITH MEMBER ZERO WITH NO GAPS OR DUPLICATES ALLOWED. TC-87IF ONE TRK HAS SUPERVISORY OUTGOING SIGNAL ‘SO’ MUST BE SUPYUSED FOR ALL MEMBERS OF A TRUNK GROUP IF OUTGOINGREQUIRED FOR ONE MEMBER. SIGNAL SO THEN ALL TRKS IN GRP MUST TC-99 SITE HASTHECPGREVERSEPROCESSHASDETECTEDA INCONSISTENTPROBLEM IN THE CUSTOMER’S DATA BASE IN THE DATA BASETABLE INDICATED IN THE ERROR MESSAGE. (TGLINK) TD-01ELEMENT 2 IS MEANINGLESS SPECIFICATION D-5288187
TL-130400-1001Table 21.1CPG Error Messages (Continued)2ND FEATURETRANSLATION TYPE GIVEN THE TRANSLATION TYPE, THE SELECT GROUP AND THE NUMBER OF DIGITS OUTPULSED MUST BE ENTERED AS THE FOLLOWING: TRANSLATIONSELECT NO. OF TRUNKDIGITS GROUPOUTPULSED LOC -- MRS -- 00-63 -MRN -- FOR ALL TRANSLATION TYPES EXCEPT ‘MRN’, THE MERS ON-NET NPA-CODE FIELD MUST BE THE ON-NET NPA-CODEFIELD MUST BE SPECIFIED THE Tl RECORD FOR HAVE VALUES OF ‘DIC’, GROUP MUST BE DEFINED ON A SVR 5210 8187D-529
TL-130400-1001Table 21 .lCPG Error Messages (Continued)CPG ERROR MESSAGES D-530TD-56 . . .TD-57 TD-60 TD-61 TF-01 TL-01 TL-01 TL-01TITLE HUNDREDS GROUP CONFLICT HUNDREDS . GROUP NOT FOUND POSSIBLE CONFLICT WITH MERS 3-DIGIT TRANSLATION ONLY 4 UNIQUE NPAS ALLOWED DASHES MUST BE USED CONSISTENTLY IN FIELD ELEMENTS HAVE INCOMPATIBLE VALUES ELEMENT 2 IS MEANINGLESS SPECIFICATION 2ND FEATURE REQUIRED IF FIRST SPECIFIEDDESCRIPTION OF MESSAGES IF THE FIRST TWO DIGITS HAVE THE FORM ‘OX’, THEN BOTH ‘OX’ AND ‘X’ HUNDREDS GROUPS MUST NOT BE SPECIFIED ON HD RECORDS. IF PRESENT, THE SYSTEM WILL PROCESS BOTH HUNDREDS GROUPS WITH FIRST TWO DIGITS OF ‘OX’ FOR THIS APPLICATION. FIRST TWO DIGITS OF TERMINAL DIGITS THE FIRST TWO DIGITS MUST CORRESPOND TO A HUNDREDS GROUP ENGINEERED ON AN HD RECORD. CONFLICT WITH 3-DIGIT TRANSLATED NPA’S WARNING MESSAGE. PRIVATE NETWORK DIGIT ANALYSIS WAS COMBINED WITH 3-DIGIT TRANSLATION (RECORD CODE NR) IN THE SAME DATA BASE TABLE. POSSIBLE PROBLEM IF PRIVATE NETWORK DIGITS CONTAIN CONFLICT CODES. (GENDIG) ONLY FOUR UNIQUE NPAS ARE ALLOWED BETWEEN MR, NT, AND TD RECORDS. (GENDIG) DATA DUMP HEADER SITE ID IF ONE CHARACTER IS DASHED IN THE DATA DUMP HEADER SITE ID, THEN ALL CHARACTERS MUST BE DASHED PRINT STATUS - PRINTER ID THE PRINTER STATUS AND PRINTER NUMBER FIELDS MUST BOTH BE DASHED OR NONDASHED. 8187SVR 5210
TL-130400-1001Table 21.1CPG Error Messages (Continued)CPG ERROR MESSAGESTITLEDESCRIPTION OF MESSAGES TL-51 . . . .PRINTER THE PRINTER ID IDENTIFIES A SPECIFIC PRINTER NUMBER NOTNUMBER OR SEVERAL PRINTER NUMBERS FOUNDDEPENDING ON THE VALUE RANGE ENTERED. >-ALL PRINTER NUMBERS INDICATED BY THE PRINTER ID MUST BE VALID PRINTER NUMBERS ON A PD RECORD. . .PRINTERPRINTERIDNUMBER(S) 0NONE 10 21 30,1 42 502 612 70912 8 3 9093 10I,3 11 0,1,3 1223 13023 141,2,3 150,1,2,3TL-52 OPI CARD NOTPMS FIELDS ON TL REQUIRE AN OPI CARD TO BE EQUIPPED ON EQUIPPED ON AN FR RECORD. RECORDCODE FR TN-51PEC NUMBER IS PEC NUMBER NOT EQUIPPEDTHE PEC NUMBER MUST BE MARKED AS EQUIPPED ON THE OE RECORD. TN-52CARD TYPE DEFINED ON FR INCOMPATIBLE WITH FCN OF INCOMING CARD TN-52CARD TYPE DEFINED ON FR INCOMPATIBLE WITH INCOMING CARD TYPE SVR 5210 8187D-531
TL-130400-1001Table 21.1CPG Error Messages (Contjnued) DESCRIPTION OF MESSAGESTHEPEC, GROUP, SLOT, AND CIRCUIT FUNCTION ALLOWED FORSPECIFIED MUST BE VALID FOR THE CARD TYPE DEFINED ON FR (FOR THIS PEC TYPE). TONE DETECTOR CIRCUIT MUST APPEAR ON A TDET 1 THAT INDICATES THAT A CARD IN THE PREVIOUS LOCATION IS A WIDE CARD AND IT OVERHANGS INTO THIS PHYSICAL LOCATION ON FR. THE PECGROUP, SLOT, AND CIRCUIT SPECIFIED VALID FOR THIS PEC TYPE. PHYSICAL LOCATION P, SLOT, AND CIRCUIT SPECIFIED FOR CTOR CIRCUIT MUST BE UNIQUE. TIME PERIODPREVIOUS TP RECORD. NUMBER TP-52TIME PERIODTHE TIME OF DAY SPECIFIED ON THE CURRENT TP OVERLAPRECORD OVERLAPS WITH THE TIME OF DAY ON A PREVIOUS TP RECORD. TR-01SECOND ELEMENT EQUALS FIRST ELEMENT TR-01SECONDNPA/ABC CODE RANGE ELEMENT LESSIN THE ABC CODE RANGE FIELD THE SECOND ABC THAN FIRSTCODE MUST BE LESS THAN OR EQUAL TO THE FIRST ELEMENTABC CODE. IF ONLY ONE NUMBER IS TO BE REPRESENTED THE SECOND ABC CODE FIELD SHOULD BE DASHED. D-5328187SVR 5210
TL-130400-1001 CPG ERROR MESSAGES TR-02>- . . . . TR-51TR-52 I ~TR-53 1 TR-54 TR-55 TR-56 1 TR-57 TR-58 TR-59 Table 21.1TITLE DASHES MUST BE USED CONSISTENTLY IN FIELD MERS NPA NOT ON MR, NT, OR TD FORM SENDING INST. NOT DEFINED ROUTING LIST NOT DEFINED MERS NPA NOT PREVIOUSLY DEFINED DUPLICATE ABC ENTRY TIME PERIOD DATA REQUIRED TIME PERIOD NOT FOUND TIME PERIOD VALUES MUST MATCH ACROSS ALL RECORDS ROUTE LIST/SEND INSTR DO NOT HAVE SAME NO. OF SELECT ORDERS CPG Error Messages (Continued)DESCRIPTION OF MESSAGES TIME PERIODS 1 TO 3 IN TIME PERIODS 1 TO 3 THE SENDING INSTRUCTION LIST NUMBER AND THE ROUTING LIST NUMBER MUST BOTH BE DASHED OR BOTH CONTAIN VALID VALUES. THE NPA CODE ON THE TR RECORD MUST BE SPECIFIED AS A 6-DIGIT TRANSLATED NPA ON AN MR RECORD OR AS AN ON-NET CODE ON EITHER AN NT OR TD RECORD. (GENDIG) SENDING INSTRUCTION LIST NUMBER A SENDING INSTRUCTION LIST NUMBER USED ON A TR RECORD MUST BE DEFINED ON AN SI RECORD. ROUTING LIST NUMBER A ROUTING LIST NUMBER USED ON A TR RECORD MUST BE DEFINED ON AN RP RECORD. TR RECORDS MUST BE PROVIDED FOR AN NPA CODE SPECIFIED AS BEING 6-DIGIT TRANSLATED ON AN MR RECORD, AND AN ON-NET CODE SPECIFIED ON AN NT OR TD RECORD. (ENDCHK) AN ABC CODE SPECIFIED ON THE TR RECORD WAS ALREADY SPECIFIED. (GENDIG) THE TIME PERIOD WAS SPECIFIED ON A TP RECORD. THEREFORE DATA FOR THE INDICATED TIME PERIOD IS REQUIRED ON THE TR RECORD. THE TR RECORD SPECIFIED VALUES FOR A TIME PERIOD WHICH WAS NOT SPECIFIED ON A TP RECORD. IF SEVERAL NR, NT, ST, AND TR RECORDS HAVE THE SAME SENDING INSTRUCTION LIST NUMBER AND ROUTING LIST NUMBER FOR TIME PERIOD 0 THEY MUST ALSO HAVE IDENTICAL VALUES FOR TIME PERIODS 1, 2, AND 3. A ROUTING LIST/SENDING INSTRUCTION COMBINATION DOES NOT MATCH IN THE NUMBER OF SELECT ORDER. IT IS POSSIBLE TO HAVE ERRONEOUS VALUES IN THE ROUTING LIST OR SENDING INSTRUCTION IF THEY DO NOT HAVE THE SAME NUMBER OF SELECT ORDERS. SVR 5210 8187D-533
TL-130400-1001 Table 21.1CPG Error Messages (Continued)CPG ERROR MESSAGES TR-60 TT-03 TT-04 TT-05 TT-06 TT-51TV-60 TT-61 D-534 TITLEABC CODE CONFLICTS WITH NPA,BUT CONFLICT CODE IS NOT Y ON MR # OR * BEING OUTPULSED ‘ONNON-DTMF TRUNK GROUP SECOND ELEMENT CONTAINS INVALID VALUE SECOND ELEMENT CONTAINS INVALID VALUE ELEMENT 2 IS MEANINGLESS SPEClFlCATlONELEMENTS HAVE INCOMPATIBLE VALUES SECOND ELEMENT CONTAINS INVALID VALUE DUPLICATE TTY NUMBER ESP NOT EQUIPPED ON OEFADS AUTO DUMP CAN BE ‘Y’ FOR ONLY ONE PORTDESCRIPTION OF MESSAGES RANGE SPECIFIED IS ZERO OR ONE, THEN THE CONFLICT CODE ON THE MR RECORD SHOULD BE ‘Y’. (RECORD CODES RP AND Tl) WITH AN OUTGOING SIGNALING MODE OF ‘DP’ OR ‘--’ WITH A PREFIX INDEX (RECORD CODES SI, LP AND/ OR PC) THAT SPECIFIES THE OUTPULSING OF DIGITS ‘ # ’ AND/OR1x7ON THE PORT, PE MUST BE ‘ADDS’. ESP - ECHO IF THE ESP IS ALLOWED ON THE PORT, THEN THE ECHO FIELD MUST BE ‘N’. TERMINAL TYPE - PRINTER IF THE TERMINAL TYPE IS ‘TTY’, THEN THE PRINTER FIELD MUST BE ‘N’. IF THE ESP IS ALLOWED ON THE PORT, THEN THE PRINTER FIELD MUST BE ‘N’. NUMBER MUST BE UNIQUE ACROSS IF ESP IS EQUIPPED ON A TT RECORDIT SHOULD AN BE DESIGNATED AS TH AUTO DUMP PORT. $I87SVR 5210