Xerox 1632 2240 3535 Color Carrera Manual
Have a look at the manual Xerox 1632 2240 3535 Color Carrera Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
6/02 4-127 DC1632/2240 REP 12.13 Repairs and Adjustments Prelaunch Training/Review 4. Remove the Stacker Motor Assembly (Figure 3). a. Remove the screws (3) while sliding the PWB Chassis upward. b. Slide the Gear. c. Remove the Stacker Motor Assembly. Figure 3 Removing Stacker Motor Assembly 1Lift PWB Chassis and Remove Screws (2) 2Remove Screw (1) 3Move Gear and Remove Stacker Motor Discon- nect P/J
6/02 4-128DC1632/2240 REP 12.14 Prelaunch Training/Review Repairs and Adjustments REP 12.14 Front Elevator BracketParts List on PL 17.11 Removal WARNINGTo avoid personal injury or shock, do not perform repair or adjustment activities with the power switch on or electrical power applied to the machine. 1. Remove the following parts: a. Rear Cover (PL 17.5) b. Stacker Tray (PL 17.1) c. Right Cover (PL 17.5) d. Front Cover (PL 17.5) 2. Remove the Bracket (Figure 1). Figure 1 Remove the Bracket3. Disconnect P/J (Figure 2). Figure 2 Disconnecting P/J 1Remove Screws (4) 2Remove Bracket 1Remove Screw (2) 2Remove Plate 3Disconnect P/J
6/02 4-129 DC1632/2240 REP 12.14 Repairs and Adjustments Prelaunch Training/Review 4. Remove the Thumbscrews (2) (Figure 3). Figure 3 Removing Thumbscrews5. Remove the Tray Guide (Figure 4). Figure 4 Removing Tray Guide 1Remove Screws (4) 2Remove Fastener and Cable Clamp 3Remove Cable from Cover and remove Cover
6/02 4-130DC1632/2240 REP 12.14 Prelaunch Training/Review Repairs and Adjustments 6. Move PWB Chassis (Figure 5). Figure 5 Moving PWB Chassis7. Remove Front Elevator Bracket (Figure 6). Figure 6 Removing Elevator Belt Assembly 1Release Wires from Clamp 2Loosen Screw 2Remove Screws (2) 4Move PWB Chassis Remove Screws (3) and Elevator Belt Assembly
6/02 4-131 DC1632/2240 REP 12.15 Repairs and Adjustments Prelaunch Training/Review REP 12.15 Paddle Gear ShaftParts List on PL 17.12 Removal WARNINGTo avoid personal injury or shock, do not perform repair or adjustment activities with the power switch on or electrical power applied to the machine. 1. Remove the following parts: a. Stapler Assembly (REP 12.11). b. Rear Cover (PL 17.5). 2. Remove the Cam Bracket Assembly (REP 12.18). 3. Remove the Bearing (Figure 1). Figure 1 Removing Bearing4. Remove Screw on Paddle Gear Shaft (Figure 2). Figure 2 Removing Screw on Paddle Gear ShaftRemove Clip, Gear, and Bearing Remove Screw
6/02 4-132DC1632/2240 REP 12.15 Prelaunch Training/Review Repairs and Adjustments 5. Remove the Paddle Gear Shaft (Figure 3). Figure 3 Removing Paddle Gear Shaft
6/02 4-133 DC1632/2240 REP 12.16 Repairs and Adjustments Prelaunch Training/Review REP 12.16 Finisher PWBParts List on PL 17.13 Removal WARNINGTo avoid personal injury or shock, do not perform repair or adjustment activities with the power switch on or electrical power applied to the machine. 1. Remove Rear Cover (PL 17.5). 2. Remove the PWB Cover (Figure 1). Figure 1 Removing PWB Cover3. Disconnect P/Jís (Figure 2). Figure 2 Disconnecting P/Jís 1Remove Screws (10) 2Remove PWB Cover 1Disconnect P/Jís (10) 2Remove Wire Har- ness from Guides (4)
6/02 4-134DC1632/2240 REP 12.16 Prelaunch Training/Review Repairs and Adjustments 4. Remove the Finisher PWB (Figure 3). Figure 3 Removing Finisher PWB ReplacementNOTE: When installing, keep the Core (Figure 2) inside the PWB Box. Remove Screws (6) and PWB
6/02 4-135 DC1632/2240 REP 12.17 Repairs and Adjustments Prelaunch Training/Review REP 12.17 Entrance Upper CoverParts List on PL 17.3 Removal1. Remove the H Transport Assembly (REP 12.1). 2. Remove the following: a. H Transport Front Cover (PL 17.3) b. H Transport Rear Cover (PL 17.3) c. Stop (PL 17.3) 3. Remove the H Transport Cover (Figure 1). Figure 1 Removing the H Transport Cover 1Remove Screw (2) 2Remove Cover
6/02 4-136DC1632/2240 REP 12.18 Prelaunch Training/Review Repairs and Adjustments REP 12.18 Cam Bracket AssemblyParts List on PL 17.8 Removal WARNINGTo avoid personal injury or shock, do not perform repair or adjustment activities with the power switch on or electrical power applied to the machine. 1. Remove the Rear Cover (PL 17.5) 2. Rotate the Actuator (Figure 1). Figure 1 Rotate the Actuator3. Release Harnesses (Figure 2). Figure 2 Releasing Harnesses 1Release Sole- noid Pawl2Rotate Cam 1/4 revolution 1Disconnect P/Jís (3)2Remove Clamp from Frame 4Remove Clamp from Frame 5Remove wires from Clip 3Remove wires from Clip