Xerox 1632 2240 3535 Color Carrera Manual
Have a look at the manual Xerox 1632 2240 3535 Color Carrera Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
6/02 2-301 DC1632/2240 16-965, 16-966Status Indicator RAPs Prelaunch Training/Review 16-965 ATS/APS No PaperAPS/ATS NG No Paper.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Add paper. 16-966 ATS/APS No DestinationATS/APS No Destination, other than No Paper.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Change the settings and replace the Trays.
6/02 2-302DC1632/2240 16-981, 16-982 Prelaunch Training/Review Status Indicator RAPs 16-981 Full HDFull status was detected at HD access. Full status was not cleared even during waiting for tim- ing. One or more pages are already stored.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Service actions depend on the operation specifications. Again, switch power off then on. If the problem continues, reload software. If the problem continues, replace the HD (PL 13.1). 16-982 Full HDFull status was detected at HD access. Full status was not cleared even during waiting for tim- ing. No pages can be stored.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Again, switch power off then on.
6/02 2-303 DC1632/2240 102-200, 102-201 Status Indicator RAPs Prelaunch Training/Review 102-200 Receive Buffer OverflowThe data received from the Controller exceeded the buffer amount of the destination in the Panel.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the ESS PWB (PL 13.1) 102-201 Send Buffer OverflowThe data to be sent from the Panel exceeded the buffer amount of the destination in the Panel.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the ESS PWB (PL 13.1)
6/02 2-304DC1632/2240 102-202, 102-203 Prelaunch Training/Review Status Indicator RAPs 102-202 Request Queue FullThe event that requires more than the processing capability for the request arising in the Panel has occurred.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the ESS PWB (PL 13.1) 102-203 Send Request Queue Full DebugData cannot be sent from the Panel to the Controller.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the ESS PWB (PL 13.1)
6/02 2-305 DC1632/2240 102-204, 102-205 Status Indicator RAPs Prelaunch Training/Review 102-204 SIO ParameterSerial communication failure. Incorrect message size at SIO receiving request, or incorrect Mailbox ID when a message is sent.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. 102-205 SIO CommandSerial communication failure. A command error has occurred at SIO receiving request.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software.
6/02 2-306DC1632/2240 102-206, 102-207 Prelaunch Training/Review Status Indicator RAPs 102-206 SIO StatusSerial communication failure. A header status error of the RX packet or a message status error of the RX packet has occurred.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. 102-207 Communication Manager TargetSerial communication failure. Incorrect Mailbox value on the cm_send_msg statement, or the target is not SYS when receiving from SIO.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software.
6/02 2-307 DC1632/2240 102-208, 102-209 Status Indicator RAPs Prelaunch Training/Review 102-208 Communication Manager CommandSerial communication failure. A command error has occurred when receiving from SIO.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. 102-209 EVM Returns Wrong ValueReturn value error from EVM. Panel-SW failureProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software.
6/02 2-308DC1632/2240 102-310, 102-311 Prelaunch Training/Review Status Indicator RAPs 102-310 Send Queue FullOver the upper limit of the processing capability to send data from the Panel to the Controller. ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. 102-311 Receive Queue FullThe data received from the Controller exceeded the upper limit of the processing capability in the Panel.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software.
6/02 2-309 DC1632/2240 102-312, 102-313 Status Indicator RAPs Prelaunch Training/Review 102-312 EVM Uses Wrong APIIllegal use of API by EVM.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. 102-313 AS Uses Wrong APIIllegal use of API by ASProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software.
6/02 2-310DC1632/2240 102-314, 102-315 Prelaunch Training/Review Status Indicator RAPs 102-314 Wait Event Time OutTime-Out of the event waiting timer. The response message from the Controller was not noti- fied for a specified time.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. 102-315 CTS InternalCTS Internal ErrorProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software.