Xerox 1632 2240 3535 Color Carrera Manual
Have a look at the manual Xerox 1632 2240 3535 Color Carrera Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
6/02 2-351 DC1632/2240 102-397, 102-398 Status Indicator RAPs Prelaunch Training/Review 102-397 MGRMGR error.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. 102-398 Delay Release Queue FullDelay release queue full.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2)
6/02 2-352DC1632/2240 102-399 Prelaunch Training/Review Status Indicator RAPs 102-399 InternalInternal error.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2)
6/02 2-353 DC1632/2240 103-203, 103-204 Status Indicator RAPs Prelaunch Training/Review 103-203 Machine Code FailureProduct Number Failure (Not initialized).ProcedureTurn the power OFF/ON. The fault is cleared. YN CAUTION ESS PWB and MCU PWB cannot be replaced at the same time. Replace the ESS PWB (PL 13.1). If the problem continues, replace the MCU PWB (PL 13.1) Return to Service Call Procedures. 103-204 Serial Number FailureSerial Number Failure (Not initialized).ProcedureTurn the power OFF/ON. The fault is cleared. YN CAUTION ESS PWB and MCU PWB cannot be replaced at the same time. Replace the ESS PWB (PL 13.1). If the problem continues, replace the MCU PWB (PL 13.1) Return to Service Call Procedures.
6/02 2-354DC1632/2240 103-207, 103-208 Prelaunch Training/Review Status Indicator RAPs 103-207 All Machine Codes MismatchAt least one of the three Product codes are mismatched.ProcedureTurn the power OFF/ON. The fault is cleared. YN CAUTION ESS PWB and MCU PWB cannot be replaced at the same time. Replace the ESS PWB (PL 13.1). If the problem continues, replace the MCU PWB (PL 13.1) Return to Service Call Procedures. 103-208 All Serial Numbers MismatchAt least one of the three Serial Numbers are mismatched.ProcedureTurn the power OFF/ON. The fault is cleared. YN Go to (GP 10). Return to Service Call Procedures.
6/02 2-355 DC1632/2240 103-320, 103-321 Status Indicator RAPs Prelaunch Training/Review 103-320 EEPROM FailureA write error has occurred in the SEEPROM on the ESS PWB.ProcedureTurn the power OFF/ON. The fault is cleared. YN Replace the ESS PWB (PL 13.1). Return to Service Call Procedures. 103-321 Backup SRAM FailureA write error has occurred in the NVM on the ESS PWB.ProcedureTurn the power OFF/ON. The fault is cleared. YN Replace the ESS PWB (PL 13.1). Return to Service Call Procedures.
6/02 2-356DC1632/2240 103-330, 103-331 Prelaunch Training/Review Status Indicator RAPs 103-330 ESS ROM DIMM #3 Check FailureAn ESS ROM DIMM #3 check failure was detected.ProcedureTurn the power OFF/ON. The fault is cleared. YN Remove and replace the ESS ROM DIMM #3. If the problem continues, replace the ESS ROM DIMM #3 Return to Service Call Procedures. 103-331 ESS ROM DIMM #1 Not FoundThe system detected that the ESS ROM DIMM #1 was not installed.ProcedureTurn the power OFF/ON. The fault is cleared. YN Remove and replace the ESS ROM DIMM #1. If the problem continues, replace the ESS PWB (PL 13.1). Return to Service Call Procedures.
6/02 2-357 DC1632/2240 103-332, 103-333 Status Indicator RAPs Prelaunch Training/Review 103-332 ESS Standard ROM ErrorAn error was detected in the ESS built-in standard ROM.ProcedureTurn the power OFF/ON. The fault is cleared. YN Remove and replace the ESS built-in standard ROM. If the problem continues, replace the ESS built-in standard ROM. Return to Service Call Procedures. 103-333 ASIC Failure (Panther-t)An error was detected in the Panther.ProcedureTurn the power OFF/ON. The fault is cleared. YN Replace the ESS PWB (PL 13.1). Return to Service Call Procedures.
6/02 2-358DC1632/2240 103-334, 103-335 Prelaunch Training/Review Status Indicator RAPs 103-334 Standard Post Script Font ROM ErrorAn error was detected in the standard built-in Post Script Font ROM.ProcedureTurn the power OFF/ON. The fault is cleared. YN Replace the Post Script Font ROM (PL 13.1). Return to Service Call Procedures. 103-335 Post Script Font ROM Not FoundPost Script Font ROM installation was detected.ProcedureTurn the power OFF/ON. The fault is cleared. YN Replace the Post Script Font ROM (PL 13.1). Return to Service Call Procedures.
6/02 2-359 DC1632/2240 103-336, 103-337 Status Indicator RAPs Prelaunch Training/Review 103-336 ESS RAM DIMM #3 W/r Check FailureA failure was detected during Read/Write Check of the ESS RAM DIMM #3.ProcedureTurn the power OFF/ON. The fault is cleared. YN Remove and replace the ESS RAM DIMM #3. If the problem continues, replace the ESS ROM DIMM #3 Return to Service Call Procedures. 103-337 ESS Standard RAM ErrorAn error was detected in the ESS built-in standard RAM.ProcedureTurn the power OFF/ON. The fault is cleared. YN Replace the ESS PWB (PL 13.1). Return to Service Call Procedures.
6/02 2-360DC1632/2240 103-338, 103-339 Prelaunch Training/Review Status Indicator RAPs 103-338 Same Post Script Font ROMíS FoundThe system detected that the same Post Script Font ROM was installed.ProcedureTurn the power OFF/ON. The fault is cleared. YN Install the appropriate Post Script Font ROM. If the problem continues, replace the ESS PWB (PL 13.1). Return to Service Call Procedures. 103-339 ROM DIMM Of Another Product FoundThe system detected that the ROM DIMM for another machine was installed.ProcedureTurn the power OFF/ON. The fault is cleared. YN Install the appropriate ROM DIMM. If the problem continues, replace the ESS PWB (PL 13.1). Return to Service Call Procedures.