Xerox 1632 2240 3535 Color Carrera Manual
Have a look at the manual Xerox 1632 2240 3535 Color Carrera Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
6/02 2-321 DC1632/2240 102-336, 102-337 Status Indicator RAPs Prelaunch Training/Review 102-336 Interface DM - ACD Drv. I/FInterface failure. Incorrect parameter was detected at the Drv. I/F between the DM and ACD.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Check the D-RAM and ROM. If the problem continues, perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2) 102-337 Frame Data Error with Invalid Data TypeInvalid frame data was detected. The incorrect value of the Data Type detected by Frame ID was detected.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Check the D-RAM and ROM. If the problem continues, perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2)
6/02 2-322DC1632/2240 102-338, 102-339 Prelaunch Training/Review Status Indicator RAPs 102-338 Frame Data Error Offset Address Out of ScopeInvalid frame data was detected. The Offset Address out of range was extracted from the Frame ID.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Check the D-RAM and ROM. Replace the Control Panel (PL 18.2) If the problem continues, perform re-installation of the software. 102-339 Display Request Code InvalidText Code failure. The system detected that the Code requested to be displayed was incor- rect.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Check the D-RAM and ROM. Replace the Control Panel (PL 18.2) If the problem continues, perform re-installation of the software.
6/02 2-323 DC1632/2240 102-340, 102-341 Status Indicator RAPs Prelaunch Training/Review 102-340 Interface GUAM - DM I/FInterface failure. Incorrect parameter was detected at the I/F between the GUAM and DM.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Check the D-RAM and ROM. Replace the Control Panel (PL 18.2) If the problem continues, perform re-installation of the software. 102-341 Event Queue FullEvent queue fullProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2)
6/02 2-324DC1632/2240 102-342, 102-343 Prelaunch Training/Review Status Indicator RAPs 102-342 Event Queue EmptyEvent queue emptyProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2) 102-343 Invalid ClassInvalid classProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2)
6/02 2-325 DC1632/2240 102-344, 102-345 Status Indicator RAPs Prelaunch Training/Review 102-344 Invalid TypeInvalid typeProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2) 102-345 Timer Queue FullTimer queue fullProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2)
6/02 2-326DC1632/2240 102-346, 102-347 Prelaunch Training/Review Status Indicator RAPs 102-346 Invalid Timer NumberInvalid timer numberProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2) 102-347 Undefined TrapUndefined trapProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2)
6/02 2-327 DC1632/2240 102-348, 102-349 Status Indicator RAPs Prelaunch Training/Review 102-348 Command Access ExceptionExceptional command accessProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2) 102-349 Invalid CommandIllegal commandProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2)
6/02 2-328DC1632/2240 102-350, 102-351 Prelaunch Training/Review Status Indicator RAPs 102-350 Privilege CommandPrivilege commandProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2) 102-351 No FPU Exception Exceptional FPU non-existenceProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2)
6/02 2-329 DC1632/2240 102-352, 102-353 Status Indicator RAPs Prelaunch Training/Review 102-352 Address MisalignAddress mis-alignmentProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2) 102-353 Data Access ExceptionExceptional data accessProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2)
6/02 2-330DC1632/2240 102-354, 102-355 Prelaunch Training/Review Status Indicator RAPs 102-354 Tag OverflowTag overflowProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2) 102-355 No Co Processor Exception Exceptional Co Processor non-existenceProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Perform re-installation of the software. If the problem continues, replace the Control Panel (PL 18.2)