Xerox 1632 2240 3535 Color Carrera Manual
Have a look at the manual Xerox 1632 2240 3535 Color Carrera Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 286
6/02
2-256DC1632/2240
15-382, 15-383
Prelaunch Training/Review Status Indicator RAPs
15-382 CCD AGCAutomatic Gain Control (AGC) for CCD Channel 3 green failed.Initial Actionsï Verify that Platen Glass is installed correctly.
ï Verify that NVM 715-400 = 1ProcedureNOTE: Refer the BSD 6.1, 6.2 and 6.7 as required.
Enter dC330 [6-002] and press Start. The Exposure Lamp illuminates.
YN
Go to the 6-371 Exposure Lamp RAP.
The Exposure Lamp illumination is bright and steady.
YN
Go to p/j722 and p/j724 on BSD...](http://img.usermanuals.tech/thumb/82/49005/w64_xerox-1632-2240-3535-color-carrera-service-manual-285.png "Page 286
6/02
2-256DC1632/2240
15-382, 15-383
Prelaunch Training/Review Status Indicator RAPs
15-382 CCD AGCAutomatic Gain Control (AGC) for CCD Channel 3 green failed.Initial Actionsï Verify that Platen Glass is installed correctly.
ï Verify that NVM 715-400 = 1ProcedureNOTE: Refer the BSD 6.1, 6.2 and 6.7 as required.
Enter dC330 [6-002] and press Start. The Exposure Lamp illuminates.
YN
Go to the 6-371 Exposure Lamp RAP.
The Exposure Lamp illumination is bright and steady.
YN
Go to p/j722 and p/j724 on BSD...")
![Page 287
6/02
2-257 DC1632/2240
15-384, 15-385Status Indicator RAPs Prelaunch Training/Review
15-384 CCD AGCAutomatic Gain Control (AGC) for CCD Channel 5 blue failed.Initial Actionsï Verify that Platen Glass is installed correctly.
ï Verify that NVM 715-400 = 1ProcedureNOTE: Refer the BSD 6.1, 6.2 and 6.7 as required.
Enter dC330 [6-002] and press Start. The Exposure Lamp illuminates.
YN
Go to the 6-371 Exposure Lamp RAP.
The Exposure Lamp illumination is bright and steady.
YN
Go to p/j722 and p/j724 on BSD 6.1...](http://img.usermanuals.tech/thumb/82/49005/w64_xerox-1632-2240-3535-color-carrera-service-manual-286.png "Page 287
6/02
2-257 DC1632/2240
15-384, 15-385Status Indicator RAPs Prelaunch Training/Review
15-384 CCD AGCAutomatic Gain Control (AGC) for CCD Channel 5 blue failed.Initial Actionsï Verify that Platen Glass is installed correctly.
ï Verify that NVM 715-400 = 1ProcedureNOTE: Refer the BSD 6.1, 6.2 and 6.7 as required.
Enter dC330 [6-002] and press Start. The Exposure Lamp illuminates.
YN
Go to the 6-371 Exposure Lamp RAP.
The Exposure Lamp illumination is bright and steady.
YN
Go to p/j722 and p/j724 on BSD 6.1...")
6/02 2-261 DC1632/2240 16-450 Status Indicator RAPs Prelaunch Training/Review 16-318 Optional Page MemoryOptional page memory error.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Replace optional Page Memory of the Scanner. 16-450 SMB Host NamePC of the same host name is duplicated on a network.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Change the host name.
6/02 2-262DC1632/2240 16-452, 16-453 Prelaunch Training/Review Status Indicator RAPs 16-452 IP Address DuplicatedPC of the same IP address exists on a network.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Change the IP address. 16-453 IP Address AcquisitionThe IP address failed to be granted from the DHCP server.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Set the IP address.
6/02 2-263 DC1632/2240 16-454, 16-460Status Indicator RAPs Prelaunch Training/Review 16-454 Dynamic DNS Update Dynamic DNS update failed.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Again, switch power off then on 16-460 Full Status DetectedFull Status Detected at HD Access.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Again, switch power off then on
6/02 2-264DC1632/2240 16-590, 16-591 Prelaunch Training/Review Status Indicator RAPs 16-590 Read Error (Partition A)A verify error occurred in the HD partition A at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Set up the HD partition A and perform the verify test again. 16-591 Read Error (Partition B)A verify error occurred in the HD partition B at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Set up the HD partition B and perform the verify test again.
6/02 2-265 DC1632/2240 16-592, 16-593Status Indicator RAPs Prelaunch Training/Review 16-592 Read Error (Partition C)A verify error occurred in the HD partition C at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Set up the HD partition C and perform the verify test again. 16-593 Read Error (Partition D)A verify error occurred in the HD partition D at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Set up the HD partition D and perform the verify test again.
6/02 2-266DC1632/2240 16-594, 16-595 Prelaunch Training/Review Status Indicator RAPs 16-594 Read Error (Partition E)A verify error occurred in the HD partition E at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Set up the HD partition E and perform the verify test again. 16-595 Read Error (Partition H)A verify error occurred in the HD partition H at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Set up the HD partition H and perform the verify test again.
6/02 2-267 DC1632/2240 16-701, 16-702Status Indicator RAPs Prelaunch Training/Review 16-701 PLW MemoryAn insufficient memory is detected while using the ART EX.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Decrease the resolution. NOTE: Decreasing the resolution may have affect of reducing the PLW memory. 16-702 PLW MemorySystem detected insufficient buffer for the print page that cannot be compressed.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Decrease the resolution. NOTE: Decreasing the resolution may have affect of reducing the PLW memory.
6/02 2-268DC1632/2240 16-703, 16-704 Prelaunch Training/Review Status Indicator RAPs 16-703 Email To Invalid BoxSystem detected an unopened or invalid Mailbox and aborted a job when receiving an Email.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Open the appropriate Mailbox. Send an Email to a valid Mailbox. 16-704 Security BoxThe system detected that a Mailbox was full (it exceeded the maximum number of documents per Box) and aborted a job. Full status was detected at HD access and a job was aborted.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Delete unwanted documents and retry the job.
6/02 2-269 DC1632/2240 16-705, 16-706Status Indicator RAPs Prelaunch Training/Review 16-705 Security Storage without HDRegistry for Secure Print has failed because Security Storage cannot be done due to no HD available.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Check whether the HD is installed. If the problem has occurred at installation, check whether the operations for Secure Print are correct. 16-706 Maximum User NumberThe system detected that a job exceeded the maximum number of users for Secure and Proof Prints and aborted the job. Full status was detected at HD access and a job was aborted.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Delete unwanted documents/users and retry printing.
6/02 2-270DC1632/2240 16-709, 16-716 Prelaunch Training/Review Status Indicator RAPs 16-709 PLW CommandAn ART EX Command error has occurred during PLW processing.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Cancel the job and execute the command again. 16-716 Spool TIFF DataUnable to spool TIFF files because disk capacity is exceeded.ProcedureSwitch power off then on. The problem continues. YN Return to service call procedures. Install the HD or increase the capacity of the HD.