NEC Mcu 5000a Multipoint Control Unit Equipment Manual
Have a look at the manual NEC Mcu 5000a Multipoint Control Unit Equipment Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NECA 340-414-300 Revision 2.0 Page 1 of 2 MCU 5000A Multipoint Control Unit COP-227 CDTI Multipoint Teleconference Indication EXPLANATION Indication of acquisition/release of data taken. (RCON mode) RELATED COMMANDNone FORMAT CDTI __g__r__mmm__sss__xxx EXPLANATION OF PARAMETERS g= A or B Indicates the teleconference group name. r= Conference room number of terminal which is acquired or released data taken mmm= Mode LSD/HSD sss= Data Speed xxx= ON or OFF
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-227 MCU 5000A Multipoint Control Unit This page is for your notes.
NECA 340-414-300 Revision 2.0 Page 1 of 2 MCU 5000A Multipoint Control Unit COP-228 NALT Multipoint Teleconference Indication EXPLANATION Display ringing status. (After the call requested, indicate the originator received ringing status report at termination point.) RELATED COMMANDNone FORMAT NALT __n EXPLANATION OF PARAMETERS n= Logical line number
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-228 MCU 5000A Multipoint Control Unit This page is for your notes.
NECA 340-414-300 Revision 2.0 Page 1 of 2 MCU 5000A Multipoint Control Unit COP-229 NONL Multipoint Teleconference Indication EXPLANATION Display communication status. (After requested call and message, report was received, indicate it is available to communicate.) RELATED COMMANDNone FORMAT NONL __n__s__c EXPLANATION OF PARAMETERS n= Logical line number s= B, 2B, H0, 2H0 Line speed c= R: 56k, N: 64k Terminal ability
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-229 MCU 5000A Multipoint Control Unit This page is for your notes.
NECA 340-414-300 Revision 2.0 Page 1 of 2 MCU 5000A Multipoint Control Unit COP-230 NDCI Multipoint Teleconference Indication EXPLANATION Report of disconnect. (Report the line was disconnected) RELATED COMMANDNone FORMAT NDCI __n__i__s__k__t__c__b__a EXPLANATION OF PARAMETERS n= Logical line number i= c: Transmitting call, I: Receiving call Display receiving message s= B, 2B, H0, 2H0 Line speed k= R: 56k, N: 64k Terminal attribute t= hh:mm:ss (time of B1) Transmission time c= #001 ~ #999 - 00 ~ 10 (c = B1, C=B2 [only when 2B]) Display the reason b= /0 ~ /9999990 (receiving call side is /0 Price (Value of B1 + B2) a= Terminating address (display only when it was already set up)
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-230 MCU 5000A Multipoint Control Unit This page is for your notes.
NECA 340-414-300 Revision 2.0 Page 1 of 2 MCU 5000A Multipoint Control Unit COP-231 NINC Multipoint Teleconference Indication EXPLANATION Report receiving message (Report line in ready status has a reception of the message.) RELATED COMMANDNone FORMAT NINC __n__o__s__c__a EXPLANATION OF PARAMETERS n= Logical line number o= A: Auto, M: Manual Action s= B, 2B, H0, 2H0 Line speed c= R: 56k, N: 64k Terminal attribute a= Terminating address (display only when it was already set up)
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-231 MCU 5000A Multipoint Control Unit This page is for your notes.