Home > NEC > Communications System > NEC Mcu 5000a Multipoint Control Unit Equipment Manual

NEC Mcu 5000a Multipoint Control Unit Equipment Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Mcu 5000a Multipoint Control Unit Equipment Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 702
    Add page 361 to Favourites
    image text
    Enable zoom 
    							NECA 340-414-220 Revision 2.0 Page 1 of 2
MCU 5000A Multipoint Control Unit SPR-103
VIDEO CAPABILITY SETTING
TERMINAL CAPABILITY RELATED
SUMMARY:
Set the H.261 defined video capability.
STEP PROCEDURE 
Note:
Set the video capability with the factory shipment value (22H 02H
).  If change is necessary 
for any reason, follow the steps described below.
1 Enter the following command.
SSPR__ n1 =  x1 __n2 = x2 __ … ni = xi … ¿
ni:
System parameter addressA:  208H and 209H
B:  268H and 269H
[1] Video capability corresponding to the addresses (hexadecimal values) in setting the 
video capability.
The video capability is set in hexadecimal values by dividing the 16 bits (b0 to b15) 
into the upper-half and lower-half 8 bits.
ADDRESSVIDEO CAPABILITY SETTING
(1: ON,  0: OFF)
REMARKS
BIT
A: 208H
B: 268H0 QCIF Set either one of the two bits to 1.
                    (NOTE)
1 QCIF and QCIF
2 QCIF:  4/29.97 Only one of these four bits should be set to 
1.
                     (NOTE) 3 QCIF:  3/29.97
4 QCIF:  2/29.97
5 QCIF:  1/29.97
6 CIF:  4/29.97 Only one of these four bits should be set to 
1.
                     (NOTE) 7 CIF:  3/29.97
A: 209H
B: 269H0 CIF:  2/29.97
1 CIF:  1/29.97
2 ~ 7 Not used, fixed to 0 _
Note:  
If none of the bits or more than one of the bits are set to 1, video capability is not guaranteed.
    Add page 362 to Favourites
    image text
    Enable zoom 
    							Page 2 of 2 NECA 340-414-220 Revision 2.0
SPR-103 MCU 5000A Multipoint Control Unit
VIDEO CAPABILITY SETTING
TERMINAL CAPABILITY RELATED
STEP PROCEDURE 
x
i:
System parameter values See below:
[1] System parameter values on setting the video capability for the addresses 108H 
and 109H.
The factory shipment value for the system parameter is 22H 02H
.
SYSTEM PARAMETER 
VIDEO CAPABILITY ADDRESS
A: 209H
B: 269HADDRESS
A: 208H
B: 268H
00H 05H QCIF: 4/29.79 is ON
00H 09H QCIF: 3/29.79 is ON
00H 11H QCIF: 2/29.79 is ON
00H 21H QCIF: 1/29.79 is ON
00H 46H QCIF: 4/29.79 and CIF: 4/29.97 are ON.
00H 86H QCIF: 4/29.79 and CIF: 3/29.97 are ON.
01H 06H QCIF: 4/29.79 and CIF: 2/29.97 are ON.
02H 06H QCIF: 4/29.79 and CIF: 1/29.97 are ON.
00H 4AH QCIF: 3/29.79 and CIF: 4/29.97 are ON.
00H 8AH QCIF: 3/29.79 and CIF: 3/29.97 are ON.
01H 0AH QCIF: 3/29.79 and CIF: 2/29.97 are ON.
02H 0AH QCIF: 3/29.79 and CIF: 1/29.97 are ON.
00H 52H QCIF: 2/29.79 and CIF: 4/29.97 are ON.
00H 92H QCIF: 2/29.79 and CIF: 3/29.97 are ON.
01H 12H QCIF: 2/29.79 and CIF: 2/29.97 are ON.
02H 12H QCIF: 2/29.79 and CIF: 1/29.97 are ON.
00H 62H QCIF: 1/29.79 and CIF: 4/29.97 are ON.
00H A2H QCIF: 1/29.79 and CIF: 3/29.97 are ON.
01H 22H QCIF: 1/29.79 and CIF: 2/29.97 are ON.
02H 22H QCIF: 1/29.79 and CIF: 1/29.97 are ON.
2 Verify that the normal response is displayed with “OK
”.
If YES
, go to Step 3
.
If NO
, go to Step 1
.
3 End of procedure.
    Add page 363 to Favourites
    image text
    Enable zoom 
    							NECA 340-414-220 Revision 2.0 Page 1 of 2
MCU 5000A Multipoint Control Unit SPR-104
LSD CAPABILITY SETTING
TERMINAL CAPABILITY RELATED
LSD Capability (A: +20AH ~ 20BH) (B: +26AH ~ +26BH)
b7
b6b5
b4 b3 b2 b1 b0
b2 : 1200 bps
b3 : 4800 bpsDefault = 00H A: +20AH
00
0 fixed0000 fixed
0 fixed
b4 : 6400 bps
b6 : 9600 bps B: +26AH
b7 : 14,400 bps
b7
b6b5
b4 b3 b2 b1 b0
Default = 00H 0 fixed0 fixed
0 fixed0 fixed 0 fixed
0 fixed
0 fixed0 fixed A: +20BH
B: +26BH
    Add page 364 to Favourites
    image text
    Enable zoom 
    							Page 2 of 2 NECA 340-414-220 Revision 2.0
SPR-104 MCU 5000A Multipoint Control Unit
This page is for your notes.
    Add page 365 to Favourites
    image text
    Enable zoom 
    							NECA 340-414-220 Revision 2.0 Page 1 of 2
MCU 5000A Multipoint Control Unit SPR-105
HSD CAPABILITY SETTING
TERMINAL CAPABILITY RELATED
HSD Capability (A: +20CH ~ 20FH) (B: +26CH ~ +26FH)
b7
b6b5
b4 b3 b2 b1 b0
Default = 00H 0 fixed0 fixed
0 fixed0 fixed 0 fixed
0 fixed
0 fixed0 fixed A: +20CH
B: +26CH
b7
b6b5
b4 b3 b2 b1 b0
Default = 00H 0 fixed000
0
0 A: +20DH
B: +26DH
b1 : 64 kbps
b2 : 128 kbps
b3 : 192 kbps
b4 : 256 kbps
b6 : 384 kbps
Note:  When distributing HSD date, bit will be 1.0 fixed
0 fixed
b7
b6b5
b4 b3 b2 b1 b0
Default = 00H 0
0 fixed0 A: +20EH
B: +26EH
b0 : 768 kbps (R)
b2 : 1536 kbps (R)
Note:  When distributing HSD date, bit will be 1.0 fixed 0 fixed 0 fixed 0 fixed
0 fixed
Default = 00H A: +20FH
B: +26FH
b7
b6b5
b4 b3 b2 b1 b0
0 fixed0 fixed
0 fixed0 fixed 0 fixed
0 fixed
0 fixed0 fixed
    Add page 366 to Favourites
    image text
    Enable zoom 
    							Page 2 of 2 NECA 340-414-220 Revision 2.0
SPR-105 MCU 5000A Multipoint Control Unit
This page is for your notes.
    Add page 367 to Favourites
    image text
    Enable zoom 
    							NECA 340-414-220 Revision 2.0 Page 1 of 2
MCU 5000A Multipoint Control Unit SPR-106
MLP CAPABILITY SETTING
TERMINAL CAPABILITY RELATED
MLP Capability (A: +210H ~ 211H) (B: +270H ~ +271H)
b7
b6b5
b4 b3 b2 b1 b0
Default = 00H 0 fixed0 fixed
0 fixed0 fixed 0 fixed
0
00 fixed A: +210H
B: +270H
b1 : MLP-4k
b2 : MLP-6k
b7
b6b5
b4 b3 b2 b1 b0
Default = 00H 0 fixed0 fixed
0 fixed0 fixed 0 fixed
0 fixed
0 fixed0 fixed A: +211H
B: +271H
    Add page 368 to Favourites
    image text
    Enable zoom 
    							Page 2 of 2 NECA 340-414-220 Revision 2.0
SPR-106 MCU 5000A Multipoint Control Unit
This page is for your notes.
    Add page 369 to Favourites
    image text
    Enable zoom 
    							NECA 340-414-220 Revision 2.0 Page 1 of 2
MCU 5000A Multipoint Control Unit SPR-107
NETWORK CLASSIFICATION CAPABILITY SETTING
TERMINAL CAPABILITY RELATED
Network Classification Capability (A: +212H ~ 213H) (B: +272H ~ +273H)
b7
b6b5
b4 b3 b2 b1 b0
Default = 00H 0 fixed0 fixed
0 fixed0 fixed 0 fixed
00 fixed A: +212H
B: +272H
b1 : 56 kbps (restricted)0 fixed
b7
b6b5
b4 b3 b2 b1 b0
Default = 00H 0 fixed0 fixed
0 fixed0 fixed 0 fixed
0 fixed
0 fixed0 fixed A: +213H
B: +273H
    Add page 370 to Favourites
    image text
    Enable zoom 
    							Page 2 of 2 NECA 340-414-220 Revision 2.0
SPR-107 MCU 5000A Multipoint Control Unit
This page is for your notes.
    All NEC manuals Comments (0)

    Related Manuals for NEC Mcu 5000a Multipoint Control Unit Equipment Manual