NEC Mcu 5000a Multipoint Control Unit Equipment Manual
Have a look at the manual NEC Mcu 5000a Multipoint Control Unit Equipment Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 529
NECA 340-414-300 Revision 2.0 Page 3 of 6
MCU 5000A Multipoint Control Unit COP-178
STLP
System Setting and Maintenance
(continued)
INPUT FORMAT
STLP
__xy__p1[__p2] ¿
EXPLANATION OF INPUT PARAMETERS
x= A, B, C, D, E, F, G, H, or P
Specifies the point at which the test or input signal is looped back.
If P is specified, the test loop is removed. Valid values for x are:
A, B, C, D, E, F, G, H, or P
y= L or R
Specifies the type of loopback. Valid values for y are:
L: local-side loopback
R: remote-side...](http://img.usermanuals.tech/thumb/54/84243/w64_nec-mcu-5000a-equipment-manual_d-528.png "Page 529
NECA 340-414-300 Revision 2.0 Page 3 of 6
MCU 5000A Multipoint Control Unit COP-178
STLP
System Setting and Maintenance
(continued)
INPUT FORMAT
STLP
__xy__p1[__p2] ¿
EXPLANATION OF INPUT PARAMETERS
x= A, B, C, D, E, F, G, H, or P
Specifies the point at which the test or input signal is looped back.
If P is specified, the test loop is removed. Valid values for x are:
A, B, C, D, E, F, G, H, or P
y= L or R
Specifies the type of loopback. Valid values for y are:
L: local-side loopback
R: remote-side...")
NECA 340-4 14- 30 0 Revisio n 2.0 Page 5 o f 6 MCU 5000A Multipoint Control U nit COP-178 STLP y ______________pp__ ____
Page 6 of 6 NECA 340-414-300 Revision 2.0 COP-178 MCU 5000A Multipoint Control Unit This page is for your notes.
NECA 340-4 14- 30 0 Revisio n 2.0 Page 1 o f 4 MCU 5000A Multipoint Control U nit COP-179 TLOP
Page 2 of 4 NECA 340-414-300 Revision 2.0 COP-179 MCU 5000A Multipoint Control Unit TLOP System Setting and Maintenance (continued) (2) For x=L p 1=1 ~ 8 Specifies a teleconference port number to be tested. Valid values for p 1 are: 1 through 8 p 2: not used p 3: not used p 4: not used (3) For X= A p 1=1 ~ 8 Specifies a teleconference port number to be tested. Valid values for p 1 are: 1 through 8 p 2= L, R, C, I, or S Specifies the audio test signal condition. Valid values for p 2 are: L: The returned audio test signal level is measured when test signal is outputted to the specified port for 500ms. R: The audio signal level is measured. C: The continuous audio test signal is outputted (TONE 1). I: The continuous audio test signal is outputted (TONE 2). S: The audio test signal is stopped outputting. p 3= 0, 1, 2, or 3 Specifies the output level of test signal generated by the Pattern Generator. Valid values for p 3 are: 0: 0 dBm0 1: -12 dBm0 2: -24 dBm0 3: -36 dBm0 p 4= 0, 1, 2, or 3 Specifies a frequency of test signal. Valid values for p 4 are: 0: 500 Hz 1: 800 Hz 2: 1000 Hz 3: 1600 Hz
NECA 340-4 14- 30 0 Revisio n 2.0 Page 3 o f 4 MCU 5000A Multipoint Control U nit COP-179 TLOP
Page 4 of 4 NECA 340-414-300 Revision 2.0 COP-179 MCU 5000A Multipoint Control Unit This page is for your notes.
NECA 340-4 14- 30 0 Revisio n 2.0 Page 1 o f 2 MCU 5000A Multipoint Control U nit COP-180 RTLP
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-180 MCU 5000A Multipoint Control Unit This page is for your notes.
NECA 340-4 14- 30 0 Revisio n 2.0 Page 1 o f 2 MCU 5000A Multipoint Control U nit COP-181 RROM
Page 2 of 2 NECA 340-414-300 Revision 2.0 COP-181 MCU 5000A Multipoint Control Unit This page is for your notes.