Home
>
Toshiba
>
Communications System
>
Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual
Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual
Have a look at the manual Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Strata AirLink Systems BSIA System Installation Strata DK I&M 5/9916-19 Strata AirLink Systems Step 7: Install the Strata AirLink Manager Software 1. Check the PC hardware/ software against the required minimums.Refer to “Check the System Hardware and Software Requirements” on Page 16-3. 2. Close any open applications in Windows. 3. Insert the Strata AirLink Manager software floppy disk into the A:\ drive. 4. In Windows 98/95, click Start and Run ...or in Windows 3.11/3.1, open Program Manager and click File and Run.A dialog box displays requesting the location of the setup disk. 5. Click File and Run. A dialog box displays requesting the location of the setup disk. 6. Type A:\Setup and click OK.The Windows setup screen appears and warns you to close other Windows applications. 7. Click Yes A dialog box displays, recommending a destination path of C:\Wireless. ...or No if you need to close applications. 8. Click OK C:\Wireless is accepted as the destination directory. ...or change the destination drive and directory. 9. Click OK. A dialog box displays asking for verification of the software location (its program directory or the Windows system directory). It is recommended that the program directory is used. 10. Select the program directory. 11. Click OK. The files are copied to the hard disk. A program group is created.
Strata AirLink Systems BSIA System Installation 16-20Strata DK I&M 5/99 Step 8: Copy the Upgrade Software 1. Place the Strata AirLink floppy disk #2 into drive A:\. 2. In Windows 98/95, double- click the My Computer icon ...or in Windows 3.11/3.1, open Program Manager. 3. Navigate to the A: drive. 4. From the A:\ drive, highlight the file to be copied. 5. From the Edit pull-down menu, double-click Copy. All of the highlighted files are copied to the clipboard. 6. Navigate to the C:\Wireless\Software subdirectory. 7. From the Edit pull-down menu, double-click Paste.All of the files on the clipboard are pasted to the subdirectory. 8. Close all the windows and return to the Strata Airlink Manager application. 3332 3505
Strata AirLink Systems BSIA System Installation Strata DK I&M 5/9916-21 Strata AirLink Systems Step 9: Configure the System Substep A: Activate UTAM1. Make sure the PC is connected to a BSIA. 2. Turn on the PC. Windows automatically starts. 3. Double-click the Strata AirLink Manager Desktop icon.This displays only once when the system is initialized. 4. Type the name, organization (company name) and the password. Important!If the password is forgotten, the software must be reloaded. The password can be changed after initialization of the system. 5. Click Continue. The Password Verification dialog box appears. 6. Enter the same password and click OK.The Setup dialog box displays again. 7. Click Continue. The software starts and requests your password. Important!If a warning message that the manager cannot open port 1 or 2 is received, check the software port configuration against the hardware configuration. 8. Enter the password and click OK. 1. From the Desktop Toolbar, click the Status icon. 3327 3289 3484
Strata AirLink Systems BSIA System Installation 16-22Strata DK I&M 5/99 2. Click Get UTAM Inputs from Strata Airlink. 3. Make a note of the BSIA serial number and input codes before calling the Strata AirLink Activation Desk because the staff will request these numbers. 4. Call the Strata AirLink Activation Desk, (949) 598- 4980 for the activation code. NoteThe hours of operation are: Monday through Friday, 8:00 a.m. to 5:00 p.m., Pacific Standard Time. After the BSIA serial number and input codes are given to the activation desk, the technician will give you the UTAM system activation code. 5. Close the Get UTAM Inputs From Strata AirLink window.The Status window displays. 6. From the Status window, highlight UTAM. 7. Select Send UTAM Activation Code to Strata AirLink. 8. From the UTAM Activation Code dialog box, enter the UTAM Activation Code. 9. Click OK.The message “Wireless system has been activated” displays at the bottom of the Status window. Important!Install the UTAM code in one hour or a new one must be obtained. 3485 3486 3487
Strata AirLink Systems BSIA System Installation Strata DK I&M 5/9916-23 Strata AirLink Systems Substep B: Set the System Time and DateNormal LED indications display on the BSIA (PWR and Master LEDs ON) and Base Stations (PWR LED ON). Several messages display (below) on the PC screen as Strata AirLink Manager tests the installation. Important!If the message “Waiting for Wireless Manager” does not appear in the Status window before the progress bar times out, or LED S2 remains lit after a reboot, the BSIA has not been upgraded. Repeat Substeps 1~9. 1. Click the Configuration icon. 2. Highlight Preferences. 3. Click Time and Date. 3491 3282 3274
Strata AirLink Systems BSIA System Installation 16-24Strata DK I&M 5/99 Substep C: Enter the System Settings4. Enter the time and date. 5.Click “Automatic daylight savings time adjustment,” if needed. 6. Send the new data to the configuration file. 7. Click Close. 1. Complete the System Settings form.See Table 16-5 on Page 16-28. 2. Open the Strata AirLink Manager program. 3. Click the Configuration icon. 4. Highlight Select Database. 5. Click System Settings ...or double-click “System Settings” in the active window. 6. Click the Get icon. The current data from the BSIA displays. 3289 3270 3271
Strata AirLink Systems BSIA System Installation Strata DK I&M 5/9916-25 Strata AirLink Systems Substep D: Configure the Handsets 7. Verify previous settings. 8. Enter the System and Base Station IDs, and timing intervals.The recommended timing intervals are: ©Stop ringing time – 4500 ms ©Dial tone delay – 200 ms ©DTMF cycle duration – 200 ms ©DTMF off duration – 100 ms ©Hookflash duration – 500 ms ©FT pause duration – 1000 ms ©FT inter-event pause – 100 ms 9. Click the Send icon. The new data is sent to the BSIA. 10. Save the file (file extension is .sdb). 1. Complete the User Settings form.See Table 16-6 on Page 16-29. 2. Ensure that each handset ID corresponds to the correct connector pair. 3. Open the Strata AirLink Manager program. 4. Click the Configuration icon. 5. From the Configure Window, click Select Database and User Database. 3289 3272
Strata AirLink Systems BSIA System Installation 16-26Strata DK I&M 5/99 Substep E: Program the Button Sequences6. Click the Get icon. The current data from the BSIA displays. 7. Verify the previous BSIA settings. 8. Enter the handset ID. 9. Save the file (file extension is .udb). 10. Click the Send icon. The new data is sent to the BSIA. 1. Complete the Programming Button Sequences form.Consider the order in which commands and text displays should occur during the execution of a telephone feature. See Ta b l e 1 6 - 7 on Page 16-30. 2. Enter events 1~20 using the command codes or text displays. 3. Open the Strata AirLink Manager program. 4. Click the Configuration icon. 5. From the Configure Window, click Select Database and Feature Table. 3289 3273
Strata AirLink Systems BSIA System Installation Strata DK I&M 5/9916-27 Strata AirLink Systems 6. Click Select Event and Commands. 7. Click a command ( Hookflash, 1~0, *, #, etc.).The command appears in the designated column (labeled Event 1~20). The Select Event pull-down menu displays. 8. Highlight Display. 9. Click an LCD message ( CALL WAIT , CALLBACK , CAMPON , etc.).The message appears in the designated column (labeled Event 1~20). A completed Feature Table looks like this: 3264 3265 3258
Strata AirLink Systems BSIA System Installation 16-28Strata DK I&M 5/99 Programming Sheets 10. Repeat Substeps 1~5 as necessary. 11. Save the file (file extension is .fdb). 12. Click the Send icon. The new data is sent to the BSIA. Table 16-5 System Settings ParameterDescriptionUnits/ RangeSuggested SettingYour Setting System IDID for the system (written on the RWIU label).1~5 Base Station 1 ID ID of the first Base Station. 0~31 Base Station 2 ID ID of the second Base Station. 0~31 Stop Ringing TimeLength of time the RWIU waits after last detection of ring voltage on a line before it stops the ring.100 ms 1 1. For example, a setting of 2 means 2 x 100 ms or 200 ms.45 Dial Tone Delay 2 2. The Dial Tone Delay eliminates the possibility of a user dialing before the office telephone system is ready.Time delay between pressing &$// and outpulsing DTMF tones.100 ms 12 DTMF Cycle DurationDuration of the full DTMF cycle (length of tone plus length of silence between tones) for dialing and other telephone system operations.10 ms 3 3. For example, a setting of 2 means 2 x 10 ms or 20 ms.20 DTMF Off DurationDuration of silence between DTMF tones.10 ms 310 Hookflash DurationDuration of the hookflash in signaling the office telephone system.100 ms 15 FT Pause DurationDuration of pause events in the Feature Table.100 ms 110 FT Inter-event PauseDuration of pause between events in the Feature Table.100 ms 11 Second Base Station Service EnabledEnables service for a second Base Station. TRUE if a second Base Station is installed. FALSE if only one Base Station is installed or out of order.NA