Canon Maxify Ib4020 User Guide

							4103Cause
Cannot perform printing with the current print settings.
Action Press the printer's  Stop button to cancel printing.
Then change the print settings and print again.571
 
						

							4104Cause
The paper size or the media type that cannot be fed from the cassette 2 is specified.
Action
Press the printer's  Stop button to cancel printing.
Specify the paper size setting to A4, Letter, or Legal and specify the media type setting to Plain Paper. Then print again.
Note
•
If you will not change the paper size setting or the media type setting, select the cassette 1 as the
paper source. If this is the case, register the cassette 1 paper information properly.
572
 
						

							5100Cause
Printer error has occurred.
Action Cancel printing and turn off the printer.
Then confirm the following.•
Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving.
If any, remove the materials.
•
Confirm that the ink tanks are installed properly.
Push an ink tank until it clicks into place.
After confirming the conditions above, turn on the printer again. If the problem is not resolved, contact the service center.
Important
•
When you clear the jammed paper or protective material that is preventing the print head holder from
moving, be careful not to touch the clear film (A) or the white belt (B).
If the paper or your hands touch these parts and blot or scratch them, the printer can be damaged.
573
 
						

							5102Cause
Printer error has occurred.
Action Cancel printing and turn off the printer.
Then confirm the following.•
Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving.
If any, remove the materials.
•
Confirm that the ink tanks are installed properly.
Push an ink tank until it clicks into place.
After confirming the conditions above, turn on the printer again. If the problem is not resolved, contact the service center.
Important
•
When you clear the jammed paper or protective material that is preventing the print head holder from
moving, be careful not to touch the clear film (A) or the white belt (B).
If the paper or your hands touch these parts and blot or scratch them, the printer can be damaged.
574
 
						

							5103Cause
Printer error has occurred.
Action Cancel printing and turn off the printer.
Then confirm the following.•
Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving.
If any, remove the materials.
•
Confirm that the ink tanks are installed properly.
Push an ink tank until it clicks into place.
After confirming the conditions above, turn on the printer again. If the problem is not resolved, contact the service center.
Important
•
When you clear the jammed paper or protective material that is preventing the print head holder from
moving, be careful not to touch the clear film (A) or the white belt (B).
If the paper or your hands touch these parts and blot or scratch them, the printer can be damaged.
575
 
						

							5104Cause
Printer error has occurred.
Action Cancel printing and turn off the printer.
Then confirm the following.•
Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving.
If any, remove the materials.
•
Confirm that the ink tanks are installed properly.
Push an ink tank until it clicks into place.
After confirming the conditions above, turn on the printer again. If the problem is not resolved, contact the service center.
Important
•
When you clear the jammed paper or protective material that is preventing the print head holder from
moving, be careful not to touch the clear film (A) or the white belt (B).
If the paper or your hands touch these parts and blot or scratch them, the printer can be damaged.
576
 
						

							5105Cause
Printer error has occurred.
Action Cancel printing and turn off the printer.
Then confirm the following.•
Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving.
If any, remove the materials.
•
Confirm that the ink tanks are installed properly.
Push an ink tank until it clicks into place.
After confirming the conditions above, turn on the printer again. If the problem is not resolved, contact the service center.
Important
•
When you clear the jammed paper or protective material that is preventing the print head holder from
moving, be careful not to touch the clear film (A) or the white belt (B).
If the paper or your hands touch these parts and blot or scratch them, the printer can be damaged.
577
 
						

							5200Cause
Printer error has occurred.
Action Turn off the printer, and unplug the power cord of the printer from the power supply.
Plug the printer back in and turn the printer back on.
If the problem is not resolved, contact the service center.578
 
						

							5203Cause
Printer error has occurred.
Action Turn off the printer, and unplug the power cord of the printer from the power supply.
Plug the printer back in and turn the printer back on.
If the problem is not resolved, contact the service center.579
 
						

							5204Cause
Printer error has occurred.
Action Turn off the printer, and unplug the power cord of the printer from the power supply.
Plug the printer back in and turn the printer back on.
If the problem is not resolved, contact the service center.580