Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions

							SATURN EPABX 
JR-DYAD User Instructions 
. The associated line pickup lamp lights steadily. 
2. Pick up the handset. 
l Dial tone is heard. A30808-X5051-C150-l-B919 
issue 1, June 1985 
3. Depress the DIAL 
I feature button. 
l Ringback tone is heard. 
4. When the called party answers, you may start talking. 
10-2 (2 pages)  
						

							SATURN EPABX 
JR-DYAD User Instructions 
SECTION 11.00 INTERCOM FEATURES 
11.01 Automatic Intercom. This feature allows you to place 
an intercom call to another predetermined JR-DYAD or DYAD. 
This feature overrides the Do Not Disturb feature and Call For- 
warding features, if active at the called JR-DYAD. 
a. To place an Automatic Intercom call: 
1. Depress the ICOM 
I. pickup button. 
l The ICOM lamp lights steadily. 
2. Pick up the handset. 
l Ringback tone is heard. 
3. When the called party answers, you may begin to 
talk. 
b. To answer an Automatic Intercom call: 
1. Your ICOM lamp flashes and you receive three- 
burst alerting tone. 
2. Depress the ICOM 
I pickup button. 
l The ICOM lamp lights steadily. 
3. Pick up the handset. 
l Three-burst alerting tone ceases. l You are connected to the calling party. 
4. You may begin to talk. 
11.02 Executive Intercom. This feature allows you to place 
a call to another JR-DYAD within a prearranged executive in- A30808-X5051-C150-i-B919 
Issue 1, June 1985 
tercom group. This feature overrides the Do Not Disturb fea- 
ture and Call Forwarding features, if active at the called 
JR-DYAD. 
a. To place an Executive Intercom call: 
Depress the s,AFy pickup button. 
‘I 
l The ICOM DIAL lamp lights steadily. 
Pick up the handset. 
l Dial tone is heard. 
Dial the single-digit code that corresponds to the 
desired party. 
l Ringback tone is heard. 
When the called party answers, you may begin to 
talk. 
b. To answer an Executive Intercom call: 
1. Your ICOM DIAL lamp flashes and you receive 
three-burst alerting tone. 
2. Depress the s,dfT pickup button. 
I 
l The ICOM lamp lights steadily. 
3. Pick up the handset. 
l Three-burst alerting tone ceases. l You are connected to the calling party. 
4. You may begin to talk. 
11-l (11-2 blank)  
						

							SATURN EPABX 
JR-DYAD User Instructions 
SECTION 12.00 PRIVACY FEATURES 
A30808-X5051-C150-l-B919 
Issue 1, June 1985 
12.01 Executive Override. This feature allows you, upon en- 
countering busy tone, to enter into the existing conversation 
for the intended purpose of announcing a high priority or 
emergency call. Before the override occurs, a warning tone 
is heard by the two conversing parties, alerting them of the 
impending override. 
a. To override a busy call using the Executive Override 
feature button: 
1. While listening to busy tone, depress the OVER 
I RIDE 
feature button. 
l Executive Override tone is heard, followed by 
the connection to the existing conversation. 
l OVER RIDE lamp lights steadily. 
2. You may begin to talk. 
NOTE: The Busy Override injection tone is heard repeat- 
edly every 8 to 20 seconds after overriding a call 
in progress. 
b. To override a busy call using the Executive Override 
feature access code: 
1. While listening to busy tone, or special ringback 
tone, depress the Xler 
El Conf feature button. 
l Recall dial tone is heard. 
2. Dial the Executive Override feature access code. 
l Executive Override tone is heard, followed by 
the connection to the existing conversation. 
NOTE: Reorder tone is heard if the connection is denied 
(e.g, the telephone is assigned Data Line Security 
or Executive Override Security. 
3. You may begin to talk. 
NOTE: The Busy Override injection tone is heard repeat- 
edly every 8 to 20 seconds after overriding a call 
in progress. 
12.02 Executive Override - Automatic. This feature allows 
you to camp-on to a busy extension and automatically break 
into the existing conversation if the called party does not an- 
swer your waiting call within a predetermined period of time. 
a. To activate Executive Override - Automatic: 
1. While listening to busy tone or special ringback 
tone, wait for the called party to answer. 
2. If the called party does not answer your waiting call 
within a predetermined time, the override occurs 
automatically. 
l Executive Override tone is heard followed by 
the connection to the existing conversation. 
3. You may begin to talk. NOTE: The Busy Override injection tone is heard repeat- 
edly every 8 to 20 seconds after overriding a call 
in progress. 
12.03 Do Not Disturb. This feature allows you to make your 
JR-DYAD busy to all incoming calls whenever you desire not 
to be disturbed. 
Activation of Do Not Disturb by using the DND feature button 
will “busy out” your prime line extension only. For all non- 
prime lines appearing on your;lR-DYAD, incoming calls will 
cause the lamp of the associated line pickup button to flash; 
however, alerting tone will be inhibited. 
Activation of Do Not Disturb can be performed on any line 
appearing at your JR-DYAD (including your prime line) by di- 
aling the Do Not Disturb feature activation code, if allowed 
by the line’s class of service. 
To activate Do Not Disturb using the DND feature button: 
a. To make your JR-DYAD busy to incoming calls: 
Depress the II feature button. (The button 
may be depressed while you’re busy on a call or 
when the JR-DYAD is idle.) 
l DND lamp lights steadily indicating that the Do 
Not Disturb feature is activated. 
Hang up, if off-hook. 
You can originate calls while Do Not Disturb is in effect; 
however, other calls cannot wait on the associated line. Inter- 
com calls are not affected by activation of the feature. Mes- 
sages may also wait at your JR-DYAD. 
Each time you pick up the handset, recall dial tone is heard 
as a reminder that your JR-DYAD has Do Not Disturb ac- 
tivated. 
b. To reestablish normal operation of your JR-DYAD: 
1. Depress the DND 
I feature button. (The 
button 
may be depressed while you’re busy on a call or 
when the JR-DYAD is idle.) 
l DND lamp extinguishes indicating that the Do 
Not Disturb feature is deactivated. 
2. Hang up, if off-hook. 
To activate Do Not Disturb using the Do Not Disturb feature 
access code: 
a. To make your JR-DYAD busy to incoming calls: 
1. Select and depress the appropriate line pickup 
button. 
l Line pickup button lamp lights steadily. 
2. Pick up the handset. 
12-1  
						

							SATURN EPABX 
JR-DYAD User Instructions 
l Dial tone is heard. 
3. Dial the Do Not Disturb feature activation code. 
l Confirmation tone is heard. l Your JR-DYAD is now made busy to incoming 
calls on the prime line only. Audible tone alert- 
ing will be inhibited on all other lines appear- 
ing on your JR-DYAD. 
4. Hang up. 
You can originate calls while Do Not Disturb is in effect; 
however, other calls cannot wait on the associated line. Inter- 
com calls are not affected by activation of the feature. Mes- 
sages may also wait at your JR-DYAD. 
Each time you pick up the handset, recall dial tone is heard 
as a reminder that your JR-DYAD has Do Not Disturb ac- 
tivated. 
b. To reestablish normal operation of your JR-DYAD: 
1. Pick up the handset. 
l Recall dial tone is heard indicating Do Not Dis- 
turb is in effect. 
2. Dial the Do Not Disturb cancellation .code. 
l Confirmation tone is heard indicating cancel- 
lation of the Do Not Disturb feature. 
3. Hang up. 
12.04 Call Privacy. Activation of the Call Privacy feature on 
a specific line prevents all other parties from bridging on that 
line. This feature may be assigned to your JR-DYAD on an 
automatic activating and manual activating basis. If your JR- 
DYAD is assigned the automatic activating option, each time 
you receive or place a call, Call Privacy is automatically ac- 
tivated. 
For JR-DYADs assigned the automatic activation option: 
a. To deactivate Call Privacy: 
While in an established conversation, depress the 
I PRIV feature button. 
l PRIV lamp extinguishes indicating Call Privacy is 
deactivated. (The PRIV lamp remains extinguished A30808-X5051-C150-l-B919 
Issue 1, June 1985 
until the call is disconnected.) 
A third party can now bridge on the line by depress- 
ing the associated line pickup button. 
Call Privacy may be reactivated by depressing the 
I PRIV 
feature button. 
For JR-DYADs assigned the manual activation option: 
a. 
NOTE: To activate Call Privacy: 
Depress the 
I PRIV feature button. (The button can 
be depressed while you’re busy on a call or’when the 
JR-DYAD is idle.) 
PRIV lamp lights steadily, indicating Call Privacy 
is active. 
Any party attempting to bridge on the line receives 
busy tone. If a party has already bridged on the line, 
the bridged party is disconnected from the call and 
busy tone is heard. 
b. To deactivate Call Privacy: 
Depress the 
I PRIV 
feature button. (The button can 
be depressed while you’re busy on a call or when the 
JR-DYAD is idle.) 
l PRIV lamp extinguishes, indicating Call Privacy is 
deactivated. 
12.05 Station Ringer Cutoff. This feature allows you to dis- 
able the audible alerting device in your JR-DYAD. When dis- 
abled, the only indication that you receive of an alerting call 
is the pickup button’s flashing lamp. 
a. To disable the audible alert tone: 
feature button, at any time. 
l RINGER OFF lamp lights steadily. 
b. To enable the audible alert tone: 
feature button, at any time. 
l RINGER OFF lamp extinguishes. 
12-2 (2 pages)  
						

							SATURN EPABX A30808-X5051-C150-l-B919 
JR-DYAD User Instructions Issue 1. June 1985 
SECTION 13.00 SPEED CALLING FEATURES 
13.01 Saved Number Redial. This feature allows you to store, 
into system memory, a telephone number that you have just 
dialed by depressing a feature button and have this number 
automatically redialed at a later time by depressing the same 
feature button. Only one number can be stored at a time from 
your JR-DYAD. NOTES: After dialing the telephone number, you can expe- 
dite receiving confirmation tone by depressing the 
# key. 
The destination may be a number that requires sup- 
plemental dialing. 
a. To store a number: 5. Hang up. 
Upon dialing a do-not-answer (ringback tone is heard) 
or busy (busy tone is heard) number, or while estab- 
lished in conversation with a called party, depress the 
SAVE 
I feature button to store the just-dialed 
NO 
number. 
l SAVE NO lamp lights steadily. l After you hang up, the SAVE NO lamp extinguish- 
es; however, the number is stored in memory. b. To place a Speed Call: 
1. Select and depress the appropriate line pickup 
button. 
l The associated line pickup lamp lights steadily. 
2. Pick up the handset. 
l Dial tone is heard. 
NOTE: The number is saved regardless of whether the 
called party answers or is busy. 
b. To initiate a call to the party associated with the stored 
number: 3. Depress the 
I ‘rikD feature button or dial the 
Speed Calling - Individual feature access code. 
l SPEED IND lamp lights steadily. 
1. Select and depress the appropriate line pickup 
4. 
button. Dial the one-digit speed calling code correspond- 
ing to the desired telephone destination number. 
l SPEED IND lamp extinguishes. l The associated line pickup lamp lights steadily. 
2. Pick up the handset. 
l Dial tone is heard. 5. When the called party answers, you may begin to 
talk. 
SAVE 
3. Depress the NO 
I feature button. 
l SAVE NO lamp lights steadily during system di- 
aling, then extinguishes. 
l Ringback tone is heard. 13.03 Speed Calling - Group. This feature allows you to place 
speed calls to frequently-called destinations. The destination 
numbers (normally outside telephone numbers) are stored in 
SATURN EPABX memory, along with a two-digit code as- 
sociated with each number. These codes are normally listed 
in your company’s telephone directory. 
4. When the called party answers, you may begin to 
talk. .a. To place a speed call: 
1. Select and depress the appropriate line pickup 
button. 
13.02 Speed Calling - Individual. This feature allows you 
to establish a personal speed call list of up to IO frequently- 
called telephone numbers. Each number (up to a maximum 
of 18 digits. and internal or external to the SATURN System) 
is assicmed a one-digit code (0 to 9) and programmed into 2. 
l The associated line pickup lamp lights steadily. 
Pick up the handset. 
SATURN 
a. To 
1. memory from your telephone. . Dial tone is heard. 
store or change speed calling numbers: 
Pick up the handset. 3. feature button or dial the 
Speed Calling - Group feature access code. 
2. 
3. 
4. 
l Dial tone is heard. 
Dial the Speed Calling store/change code. 
Dial the Speed Call code (0 to 9) for the number 
to be stored or changed. NOTE: l SPEED GRP lamp lights steadily. 
in SATURN Systems using only one speed calling 
group, the SPEED SYSTEM feature button is used. 
4. 
Dial the desired telephone number corresponding 
to the speed calling code. Be sure to enter the com- 
plete number including any prefix digits (e.g., 
9-l-800-342-8300). Dial the two-digit code corresponding to the desired 
telephone number. 
l SPEED GRP lamp extinguishes after system 
dialing. 
l Ringback tone is heard. 
l Confirmation tone is heard. 
5. When the called party answers, you may begin to talk. 
13-l 113-2 blank)  
						

							SATURN EPABX 
JR-DYAD User instructions 
SECTION 14.00 ADDITIONAL FEATURES 
A30808-X5051-C150-l-B919 
issue 1, June 1985 
14.01 Least Cost Routing. The Least Cost Routing (LCR) fea- 
ture is used in some SATURN EPABX Systems to route out- 
going (trunk) calls over the least costly route available at the 
time of call placement. 
a. To place an outside call: 
1. Select and depress the appropriate line pickup 
button. 
l Line pickup button lamp lights steadily. 
2. Pick up the handset. 
l Dial tone is heard. 
3. Dial the LCR access code. (Optional for some 
systems.) 
l Dial tone is heard. 
4. Dial the outside destination number. 
l Confirmation tone (three bursts of tone) is 
heard, indicating that the dialed number has 
been accepted and a route has been found. 
l The SATURN System then dials the destina- 
tion number. Ringback tone is heard if the des- 
tination number is idle. Busy tone is heard if 
the destination number is busy. 
NOTES: If route advance tone (one short burst of tone) is 
heard immediately after dialing the destination num- 
ber, wait until you hear confirmation tone. Route ad- 
vance tone indicates that the SATURN System has 
accepted the dialed number and is searching for an 
idle route. Additional route advance tones may be 
heard as the SATURN System searches for alter- 
nate routes to your destination. 
If expensive facility tone (one long burst of tone) is 
heard, the SATURN System has found a more ex- 
pensive route. If you desire not to place the call via 
a more expensive route, hang up. 
If a route is not found within a preset period of time, 
the SATURN System provides a steady burst of low 
tone (if Callback Queuing is assigned) to indicate 
that Callback Queuing has been invoked. Callback 
Queuing allows you to hang up and be called back 
(three bursts of alerting tone is heard) when a route 
becomes available. 
To answer the callback, pick up the handset, listen 
for confirmation tone followed by ringback tone. 
When the called party answers, you may begin to 
talk. 
If you do not answer the callback attempt within ap- 
proximately 18 seconds, the callback is temporari- 
ly cancelled. Additional callbacks (maximum of nine) 
will be attempted by the system every five minutes. 
5. When the called party answers, you may begin to 
talk. b. To cancel callback queuing: 
1. Pick up the handset. 
l Dial tone is heard. 
2. Dial the automatic callback cancellation code. 
l Confirmation tone is heard indicating the can- 
cellation of the callback. 
3. Hang up. _ 
14.02 SMDR Account Codes. Account codes are used with 
Station Message Detail Recording (SMDR) or preselected in- 
coming and outgoing trunk calls. Two types of account codes 
are used: standard (or default) account codes and special ac- 
count codes. Default account codes are assigned to stations 
and trunks and are automatically activated when you originate 
or receive a call over one of these groups. Special account 
codes must be entered from your telephone to complete an 
otherwise restricted outgoing call. 
a. After dialing a trunk access code (e.g., “9” for outside) 
or an LCR access code, if you hear recall dial tone, 
enter a valid account code. 
l Dial tone is heard. 
NOTE: The account code must be entered within a preset 
period of time or else the trunk is released and re- 
order tone is heard. 
b. Complete the call by dialing the desired destination 
number. (Do not redial the trunk.) 
14.03 I-Use Indication. For JR-DYADs provided with multi- 
ple lines, this feature is useful in determining which line the 
user is presently using when other lines and features are in 
use. 
To activate, depress the 
I I-USE feature button. 
l All button lamps momentarily go dark for ap- 
proximately 
1% seconds with the exception of 
the lamp corresponding to the line which you 
are using. 
14.04 Call Tracing. This feature allows you to have a con- 
nected call’s data recorded on the SMDR printer. The SMDR 
printer prints out the calling party’s extension number (if an 
internal call) or the incoming trunk and trunk group number 
(if an external call), the called number, the date and time of 
the call, and a special character on the SMDR report that the 
call was traced. 
a. To trace a call: 
1. While connected to a call, depress the Xler 
button. I 
Coof 
l Recall dial tone is heard. 
l The call is placed on Consultation Hold. 
2. Dial the Call Tracing feature access code. 
14-l  
						

							SATURN EPABX 
JR-DYAD User instructions A30808-X5051-C150-l-B919 
Issue 1, June 1985 
l Confirmation tone is heard indicating the call’s 
data has been recorded. 
l You are automatically reconnected to the call. 
NOTE: Reorder tone is heard if your phone is not allowed 
to activate this feature. 
3. Hang up or continue talking to the other party. 
14.05 Message Waiting. This feature allows you to send a 
message waiting indication to a party at another extension. 
This feature also provides a means for you to respond to a 
received message or cancel a sent message. 
a. To activate Message Waiting after dialing a do-not- 
answer or busy extension: 
1. 
NOTES: 
2. While listening to ringback tone or busy tone, 
depress the MSG 
El SET feature button or depress the 
xfer 
I button and dial the message set activation 
calf 
code. 
l MSG SET lamp lights momentarily, then extin- 
guishes. 
l Confirmation tone is heard. 
l Message waiting indication is provided at the 
called telephone. 
If the called telephone is unable to accept any more 
messages (maximum of four), busy tone is heard. 
If the called telephone does not have the capability 
to receive message waiting indications, reorder tone 
is heard. 
Hang up. 
b. To activate Message Waiting without first attempting to 
call the other party: 
1. Select and depress the appropriate line pickup 
button. 
l Line pickup lamp lights steadily. 
2. Pick up the handset. 
l Dial tone is heard. 
MSG 
3. Depress the sET 
I feature button or dial the 
message waiting activation code. 
l MSG SET lamp lights steadily. 
4. Dial the extension number of the party to whom you 
wish to leave a message waiting indication. 
l Confirmation tone is heard. 
NOTES: If the called telephone is unable to accept any more 
messages (maximum of four), busy tone is heard. 
If the called telephone does not have the capability 
to receive message waiting indications, reorder tone 
is heard. 
5. Hang up. l MSG SET lamp extinguishes. . . 
c. To respond to a message waiting at your JR-DYAD: 
The MSG CALL BK lamp flashes. 
Select and depress the prime line pickup button. 
l -Line pickup lamp lights steadily. 
Pick up the handset. 
l Dial tone is heard. 
Depress the $fr& 
I feature button or dial the 
Message Waiting - Automatic Callback access code. 
l The SATURN System automatically dials the ex- 
tension number of the party that sent the 
message. 
l Ringback tone is heard. 
NOTE: If busy tone is heard, the extension is busy; try initiat- 
ing the callback at a later time. 
d. To cancel a message you sent to another telephone: 
Select and depress the appropriate line pickup 
button. 
l Line pickup button lamp lights steadily. 
Pick up the handset. 
l Dial tone is heard. 
Dial the Message Waiting - Sent cancellation code, 
or depress the ,$& feature button. 
I 
l MSG CANCEL lamp lights steadily. 
Dial the extension number to which the message was 
sent. 
l MSG CANCEL lamp extinguishes. 
l Confirmation tone is heard. 
NOTE: Reorder tone is heard instead of confirmation tone if 
an invalid access code is dialed or the message was 
already cancelled at the called telephone. 
5.. Hang up. 
e. To cancel a message that is waiting at your JR-DYAD: 
1. Depress the ,-$~-& 
I feature button or dial the 
Message Waiting - Received cancellation code. 
l MSG CALL BK lamp extinguishes if no other 
messages exist. 
14.06 Stop Hunt. This feature allows a sequential hunt group 
to be temporarily reduced in size. This feature also allows a UCD 
member to be temporarily removed from a UCD hunt group. 
a. For sequential hunt groups. 
1. To shorten the sequential hunt group: 
14-2  
						

							SATURN EPABX 
JR-DYAD User Instructions 
a) Dial the Stop Hunt activation code from the ex- 
tension in the hunt group at which all succeed- 
ing extensions are to be excluded from the 
hunting list. For example: if the hunt sequence 
includes extensions 234-235-238-237-238-239 
and you want to exclude extensions 238 and 239, 
dial the Stop Hunt access code from extension 
237. 
l Confirmation tone is heard indicating the suc- 
cessful activation of the Stop Hunt feature. 
b) Hang up. 
2. To return the hunt group to full size: 
a) Dial the Stop Hunt Cancellation code from the 
extension that activated Stop Hunt. 
l Confirmation tone is heard indicating the suc- 
cessful cancellation of the Stop Hunt feature. 
b) Hang up. 
b. For UCD hunt groups. 
1. To remove a member from a UCD hunt group: 
a) Dial the Stop Hunt activation code from the ex- 
tension to be removed from the UCD hunt group. 
l Confirmation tone is heard indicating the suc- 
cessful activation of the Stop Hunt feature. 
b) Hang up. 
2. To add a member back to a UCD hunt group: 
a) Dial the Stop Hunt Cancellation code from the 
extension that was previously removed from the 
hunt group. 
l Confirmation tone is heard indicating the suc- 
cessful cancellation of the Stop Hunt feature. 
b) Hang up. 
14.07 Mobile Authorization Codes. This feature allows you to 
place a call from a telephone that otherwise would be restrict- 
ed by its class of service. An authorization code, which is as- 
signed to a class of service with its own restrictions, must be 
dialed. 
a. To override a call restriction: 
1. Select and depress the appropriate line pickup 
button. 
l Line pickup lamp lights steadily. 
2. Pick up the handset. 
l Dial tone is heard. 
3. Dial the mobile authorization access code. 
4. Dial an authorization code. 
l Recall dial tone is heard indicating that the class 
of service assigned to the dialed authorization 
code is now in effect. A30808-X5051-C150-l-8919 
Issue 1. June 1985 
NOTE: Intercept tone is heard if an invalid authorization code 
is dialed. 
5. Place the call previously restricted. 
NOTE: If you are still restricted from placing the call, the class 
of. service assigned to the dialed authorization code 
may not allow it. 
After you have completed the call and hang up, the class of 
service defined by the authorization code is removed and the 
telephone’s original class of service is in effect. 
14.08 Universal Night Answer - Zoned. This feature allows 
you to answer incoming calls ringing the night bell(s) when the 
SATURN EPABX System is in the night service mode. 
a. To answer an incoming call: 
1. You hear the night bell(s) ringing. 
2. Select and depress the appropriate line pickup 
button. 
l Line pickup lamp lights steadily. 
3. Pick up the handset. 
9 Dial tone is heard. 
4. Depress the 
I 
UNA feature button or dial the 
appropriate Universal Night Answer access code. 
l A talking connection is established between you 
and the incoming party. 
NOTES: If reorder tone is heard, the night call already has been 
answered. If intercept tone is heard, you are not al- 
lowed to answer incoming night calls from your 
JR-DYAD. 
In some SATURN Systems, multiple night answering 
zones are provided. In these systems, depress the as- 
sociated UNA ZONE feature button or dial the as- 
sociated Universal Night Answering - Zoned access 
code (1 to 4). 
5. You may begin to talk. 
14.09 Voice Paging Access - Zoned and Area. This feature 
allows you to page another party over the loudspeaker system. 
a. To page a party: 
Select and depress the appropriate line pickup 
button. 
l Line pickup lamp lights steadily. 
Pick up the handset. 
. Dial tone is heard. 
Depress the 
I 
PAGE feature button or dial the 
associated Voice Paging access code. 
NOTE: In some SATURN Systems, multiple Voice Paging 
zones are provided. In these systems, depress the as- 
sociated PAGE ZONE feature button or dial the as- 
sociated Universal Night Answer - Zoned access code 
(1 to 4). 
14-3  
						

							SATURN EPABX A30808-X5051-C150-l-B919 
JR-DYAD User Instructions Issue 1, June 1985 
Table 14.00 Feature Access Codes and Button Labels 
FEATURE ACCESS CODE BUTTON LABEL 
HOLD FEATURES 
- 
Consultation Hold ......................................... none 
Call Hold ................................................. 
Call Hold - Flip-Flop (Broker) .................................. 
Call Park ................................................. 
Manual Hold ............................................. none 
Exclusive Hold ............................................ none Xfer Conf 
PARK PRIV 
SPLIT 
none 
Hold 
HOLD EXCEL 
CALL TRANSFER FEATURES 
CallTransfer .............................................. none Xfer Conf 
Call Transfer to Attendant ................................... none XFER “0” 
CONFERENCE FEATURES 
Add-On Conference ........................................ 
BridgeCall ............................................... 
Meet-Me Conference ....................................... 
Station Controlled Conference 
To access conference 
.................................... 
To remove any conferee. .................................. 
To remove last conferee. .................................. none 
none 
___ 
___ Xfer Conf 
(Note 1) 
MEET ME 
none 
none 
none 
CALL FORWARDING FEATURES 
Call Forwarding - All Calls 
To activate ............................................. 
To cancel .............................................. 
Call Forwarding to Public Network 
To activate 
............................................. 
To cancel .............................................. 
Call Forwarding - Busy Lines 
To activate ............................................. 
To cancel .............................................. 
Call Forwarding - No Answer 
To activate ............................................. 
To cancel .............................................. 
Call Forwarding - Secretarial 
To activate ............................................. 
To cancel .............................................. 
Call Forwarding - Return ................................... 
Forced Call Forwarding ..................................... ____ 
___ 
___ 
none FWD ALL 
FWD ALL 
none 
none 
FWD BUSY 
FWD BUSY 
FWD NO ANS 
FWD NO ANS 
FWDTC 
FWDTO 
none 
FWD FORCE 
Note 1: Activate by depressing the associated busy line pickup button. 
14-4  
						

							SATURN EPABX A30808-X5051-C150-l-B919 
JR-DYAD User instructions 
Issue 1, June 1985 
. 
Table 14.00 Feature Access Codes and Button Labels (Continued) 
FEATURE 
ACCESS CODE 
BUTTON LABEL 
9LL QUEUING FEATURES 
Internal Call Queuing - Callback 
To cancel callback ....................................... 
Internal Call Queuing - Standby. ............................. 
Outgoing Call Queuing - Callback 
To cancel callback ....................................... 
Outgoing Call Queuing - Standby ............................ none 
none _ none 
none 
none 
none 
9LL PICKUP FEATURES 
Call Pickup - Directed. ..................................... 
PICKUP DIR 
Call Pickup - Group ....................................... 
Group Pickup 
1RECT ACCESS FEATURES 
Direct Station Selection ..................................... 
Direct Trunk Group Selection. ................................ 
Direct Trunk Selection ...................................... 
Direct Destination Selection. ................................. none (Note 2) 
(Note 2) 
(Note 2) 
DIAL __ 
TERCOM FEATURES 
Automatic Intercom ........................................ none 
ICOM - 
Executive Intercom ........................................ none ICOM DIAL - 
3IVACY FEATURES 
Executive Override ......................................... 
Executive Override - Automatic .............................. 
Do Not Disturb 
To activate ............................................. 
To cancel .............................................. 
Call Privacy.. ............................................ 
Station Ringer Cutoff ....................................... none 
none 
none OVER RIDE 
none 
DND 
DND 
PRIV 
RINGER OFF 
‘EED CALLING FEATURES 
Last Number Redial ....................................... 
Saved Number Redial ...................................... 
Speed Dialing 
To store or change. ...................................... 
To place a Call. ......................................... none 
none 
none 
none Redial 
SAVE NO. 
Store 
Speed Dial 
lte 2: Customer-defined button label. 
14-5