Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions
Have a look at the manual Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 428 Siemens manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SATURN EPABX A30808-X5051-E120-l-B919 CMU Procedures Issue 1, December 1984 CUSTOMER MEMORY UPDATE PROCEDURE: ATTASSN TITLE: Attendant Assignments Access Level: 3, 4 Page 1 of 2 I STEP NO. PROMPT/EXPLANATION I. 1. ) DIS ATTASSN 2. ATTENDANT CONSOLE NUMBER (I-12) = nn , . . nn Requests attendant console number(s) for which data is to be dis- nn = console number (1-12). played. If more than one, separate each by spaces. Enter (CR) to display all attendant assignments. 3. 1 DISPLAY ASSIGNABLE KEYS? (Y/N) = a I Requests whether key assignment data is to be shown for selected a = Y = Yes, a = N = No. console(s). NOTE: Entering (CR) is the same as entering N for No. 1. > ADD ATTASSN 2. PORT EQUIPMENT NUMBER (WXYZ) = nnnn I Requests PEN for new console assignment. nnnn = valid PEN. 3. ATTENDANT EXT # = nnnn I Requests station number to be assigned to added console. NOTE: Assignment of an attendant station number is required. nnnn = extension number (O-9999). 4. EXCLUSIONS (CAS,INC,OPR,RCL) = aaa . . . aaa Requests call type exclusions to be permanently assigned to the aaa = exclusion type (0 to 3 types sepa- console; the attendant is not alerted for calls of these types. Enter rated by spaces); see Table 303.1. (CR) for no exclusions. 1. > DEL ATTASSN I 2. ATTENDANT CONSOLE NUMBER (1-12) = nn I Requests attendant console number which is to be deleted. nn = console number (1-12). NOTE: The attendant console must be placed out of service before the console can be deleted. 1. > CHA ATTASSN NOTE: The console must be placed out of service before the console can be changed. 2. ATTENDANT CONSOLE NUMBER (l-12) = nn I Requests attendant console number for which data is to be changed. nn = console number (1-12). 3. ATTENDANT EXT # = nnnn Requests station number to be assigned to console. Enter (CR) nnnn = new extension number (O-9999). for no change. 4. EXCLUSIONS (CAS,INC,OPR,RCL) = aaa . . . aaa Requests type of call exclusions to be changed at this console. If aaa = exclusion type (0 to 3 types); more than one, separate each by spaces. Enter (CR) for no change. see Table 303.1.
SATURN EPABX A30808-X5051-E120-l-B919 CMU Procedures issue 1, December 1984 CUSTOMER MEMORY UPDATE PROCEDURE: ATTASSN TITLE: Attendant Assignments STEP NO. PROMPT/EXPLANATION Page 2 of 2 5. CALL EXCLUSION STATE (ON / OFF) = aaa . . . aaa Requests new state for each exclusion type specified above. If more aaa = exclusion state: ON or OFF. than one, separate each by spaces. (Enter in same sequence.) Table 303.1 Call Exclusion Types ALPHANUMERIC INPUT CAS INC OPR RCL Centralized Attendant Calls Incoming Calls Dialing 0 (Operator) Calls Recalls DESCRIPTION MNEMONICS USED IN THIS CMU PROCEDURE: Mnemonic Definition PEN Port Equipment Number
,’ - SATURN EPABX CMU Procedures A30808-X5051-E120-i-B919 - Issue 1, December 1984 CUSTOMER MEMORY UPDATE PROCEDURE: ATTMAP TITLE: Attendant Console Map Assignments Access Level: 3, 4 ATTMAP Page 1 of 3 STEP NO. PROMPT/EXPLANATION 1. )DIS ATTMAP 2. ATTENDANT CONSOLE NUMBER (1-12) = nn . . . nn Requests attendant console number(s) for which data is to be dis- played. If more than one, separate each by spaces. Enter (CR) to display key assignment data for all consoles. nn = console number(s) (1-12). 1. )CHA ATTMAP NOTE: The attendant console must be placed out of service before map assignments can be changed. 2. ATTENDANT CONSOLE NUMBER (1-12) = nn Requests attendant console number for which assignments are to nn = console number (l-12). be changed. 3. ATTENDANT KEY NUMBER(S) (l-34) = nn . . . nn Requests key number(s) to have assignment(s) changed. If more nn = key number(s); see Figure 304.1. than one, separate each by spaces. 4. OLD KEY FEATURE ASSIGNMENT(S) = aaaaaaaa . . . aaaaaaaa Requests old feature assigned to key(s) specified above. If more aaaaaaaa = feature; see Table 304.1. than one, separate each by spaces. 5. NEW KEY FEATURE ASSIGNMENT(S) = aaaaaaaa . . . aaaaaaaa Requests new feature to be assigned to key(s) specified. If more aaaaaaaa = feature; see Table 304.1. than one, separate each by spaces. 6. ACCESS CODE FOR FEATURE = nnnn . . . nnnn Requests access code(s) to be assigned to feature(s) assigned to nnnn = access code(s). key(s). If more than one, separate each by spaces. Enter (CR) if none. NOTE: An access code must have been previously assigned before it can be inputted. 7. TRUNK GROUP NUMBER (O-31) = nn . . . nn Requests trunk group number(s) to be assigned for ACOFTG fea-. nn = trunk group number (O-31). ture. If more than one, separate each by spaces. Enter (CR) if none.
SATURN EPABX A30808-X5051-El20-l-B919 CMU Procedures Issue 1, December 1984 CUSTOMER MEMORY UPDATE PROCEDURE: ATTMAP TITLE: Attendant Console Map Assignments Page 2 of 3 Console Assignable Keys Console Preassigned Keys 3 1 4 2 6 5 7 10 (see Note 2) i 21 16 11 22 12 23 13 24 14 26 15 (see Note 1) 27 17 28 18 29 19 31 20 32 25 33 30 34 NOTES: 1. The “FLASH” key must be assigned to key number 15 at a CAS Main. 2. The “CAS” key is automatically assigned in a CAS System. This key is not used in nor-&AS Systems. Figure 304.1 Console Key Assignments
SATURN EPABX A30808-X5051-E120-l-B919 CMU Procedures Issue 1, December 1984 /’ CUSTOMER MEMORY UPDATE PROCEDURE: ATTMAP TITLE: Attendant Console Map Assignments Page 3 of 3 Table 304.1 Attendant Console Key Features ALPHAMERIC INPUT SEE DESCRIPTION NOTE NASN Not Assigned SMDR Attendant-Activated SMDR CONF Attendant Conference ACOFACC ACOF: Feature Access Codes (See Table 304.2) ACOFTG ACOF: Trunk Group Access ACCT Attendant-Entered SMDR Account Code OVERFLOW Attendant Overflow Facility OVERRIDE Attendant Override FLASH Attendant Trunk Flash Capability TRKGRP Attendant Trunk Group Access PAGE Attendant Voice Paging EXCCAS Call Exclusion: CAS Calls EXCINC Call Exclusion: Incoming Trunk Calls EXCOPR Call Exclusion: Operator (Dial 0) Calls EXCRCL Call Exclusion: Recalls PARK Call Park MSGSET Message Waiting Activation MSGCAN Message Waiting Cancellation MINALM Minor Alarm Identification VOLUME Volume Control - Attendant NOTES: 1. Not applicable to domestic (U.S.) systems. 2. Access code (ACC) required if this feature assigned. 3. Trunk group number required if this feature assigned. 4. Each ACOFACC Key controls only one feature access code. Refer to Table 304.2. 1 2,4 3 2 2 2 2 Table 304.2 Feature Access Codes Which Can Be Controlled Via the ACOFACC Key Code Call Access Dictation Access and Control Meet-Me Conference Paging Station-Controlled Conference MNEMONICS USED IN THIS CMU PROCEDURE: Mnemonic Definition ACOF Attendant Control of Facilities CAS Centralized Attendant Service SMDR Station Message Detail Recording
SATURN EPABX A30808-X5051-E120-l-B919 - CMU Procedures Issue 1, December 1984 CUSTOMER MEMORY UPDATE PROCEDURE: AUDIT TITLE: Audit Control Access Level: 3, 4 Page 1 of 2 STEP NO. PROMPT/EXPLANATION 1. ) DIS AUDIT 2. TYPE (TSTLIST, DMND) = aaaa Requests type of audit data to be displayed. If TSTLIST, go to step aaaa = type of data; TSTLIST OR DMND. 3; otherwise, procedure is completed. NOTE: Enter TSTLIST to display the status (enabled, disabled or standby) of the automatic test list shown in Table 524.1; enter DMND to list the identity of any automatic test currently waiting to run as the result of a user demand (see BEG AUDIT). 3. 1 DISPLAY TEST TYPE = aaaaaaa Requests test type to be displayed. Enter (CR) to display the con- tents of all the automatic tests shown in Table 524.1. aaaaaaa = test type; see Table 524.1. NOTE: Audits which are enabled in the automatic test list are periodically run by the system, without manual intervention. 1. ) BEG AUDIT 2. TEST TYPE = aaaaaaa Requests type of audit test to be initiated. aaaaaaa = test type; see Table 524.1. 3. NUMBER OF TEST RUNS (l-9) = n Requests number of test runs. n = test quantity (l-9). NOTES: 1. A demand audit is a test initiated by a “BEG AUDIT” command. A demand audit is started immed- iately, unless execution is blocked because another test is already running. Only one demand audit can be waiting to run at any given time. An attempt to queue up a second demand audit will be rejected. 2. The execution of an audit test (demand or automatic) may result in the processor idle-time indicator lights to stop, indicating that all processor idle time is being consumed by the test. 3. A display of alarm data will contain specific information regarding test failures from audit tests (de- mand or automatic). 1. > CHA AUDIT I I I 2. CHANGE TEST TYPE = aaaaaaa Requests type of audit test change to be made. aaaaaaa = test type; see Table 524.1. 3. STATUS (ENABLED, DISABLED, STANDBY) = aaaaaaa Requests status of audit test. aaaaaaa = test status: ENABLED - will run periodically on active processor. DISABLED - will not run periodically. STANDBY - will run periodically on standby processor only.
SATURN EPABX A30808-X5051-E120-l-8919 CMU Procedures Issue 1, December 1984 CUSTOMER MEMORY UPDATE PROCEDURE: AUDIT TITLE: Audit Control Table 524.1 Audit Test Types ALPHAMERIC INPUT DIGAPPR DTMF IOPLOOP MEMCONT MEMMIS MEMPAR MTSMEM SPEECH DESCRIPTION Digital Data Apparatus (OC II Only) Dual-Tone Multifrequency Receiver and Tone Generator Input/Output Processor Loop-Around Memory Contents Memory Mismatch (Duplex Systems Only) Memory Parity Memory Time Switch Memory Control Speech Highway Control CAN RUN ON STANDBY NO NO YES YES NO YES NO NO MNEMONICS USED IN THIS CMU PROCEDURE: Mnemonic Definition DMND Demand Test Type TSTLIST Test Listing Page 2 of 2
SATURN EPABX CMU Procedures A30808-X5051-E120-l-B919 - Issue 1, December 1984 CUSTOMER MEMORY UPDATE PROCEDURE: AUTHCODE TITLE: Authorization Code Assignments Access Level: 4 1 AUTHCODE ] Page 1 of 2 I STEP NO. PROMPT/EXPLANATION I 1. > DIS AUTHCODE I 2. AUTH CODE OR INDEX? (A/l) = a Requests whether authorization code or index range is to be dis- a = A = authorization code played. If A is entered go to Setp 3. If I is entered go to step 4. a = I = index range. 3. AUTHORIZATION CODE = nnnnnn Requests authorization code to be displayed. Enter (CR) for none. nnnnnn = Authorization code (00-999999) Procedure is completed. 4. 1 INDEX RANGE = nn . . . nn I Requests index range for which authorization codes are to be dis- nn = index numbers (O-9999) played. Separate index numbers by spaces. Enter (CR) for all. Procedure is completed. 1. 2. 3. 4. 5. > ADD AUTHCODE NEW AUTHORIZATION CODE = nnnnnn Requests new two- to six-digit authorization code. nnnnnn = code (00-999999). NOTE: For proper operataion of this feature, all authorization codes must be of the same length. DISPLAY CODE ON SMDR? (Y/N) = a Requests whether to display authorization code on SMDR. NOTE: Entering (CR) is the same as entering Y for Yes. a = Y = Yes; a = N = No. CLASS OF SERVICE NUMBER (O-31) = nn Requests COS to apply to added authorization code. DATA CLASS OF SERVICE NUM,(O-31) = nn Requests data COS to apply to added authorization code. (Needed for OC II feature package only.) NOTE: Enter (CR) to indicate no data class of service. nn = COS (O-31). nn = data COS (O-31). I I I 1 I 1. > DEL AUTHCODE I I I 1 I 2. AUTHORIZATION CODE TO BE DELETED = nnnnnn Requests authorization code to be deleted. nnnnnn = code (00-999999).
SATURN EPABX A30808-X5051-E120-l-B919 CMU Procedures Issue 1, December 1984 CUSTOMER MEMORY UPDATE PROCEDURE: AUTHCODE ‘ TITLE: Authorization Code Assignments Page 2 of 2 STEP NO. PROMPT/EXPLANATION 1. ) CHA AUTHCODE 2. AUTHORIZATION CODE TO BE CHANGED = nnnnnn Requests authorization code to be changed. nnnnnn = code (00-999999). 3. NEW AUTHORIZATION CODE = nnnnnn Requests new two- to six-digit authorization code. Enter (CR) for nnnnnn = code (00-999999). no change. 4. DISPLAY CODE ON SMDR? (Y/N) = a Request whether to display authorization code on SMDR. a = Y = Yes; a = N = No. NOTE: Enter (CR) for no change. 5. CLASS OF SERVICE NUMBER (O-31) = nn Requests COS to apply to new authorization code. nn = COS (O-31). NOTE: Enter (CR) for no change. 6. DATA CLASS OF SERVICE NUM (O-31) = nn Requests data COS to apply to new authorization code. (Needed nn = data COS (O-31). for OC II feature package only.) NOTE: Enter (CR) for no change. MNEMONICS USED IN THIS CMU PROCEDURE: Mnemonic cos DISA Definition Class of Service Direct Inward System Access
SATURN EPABX A30808-X5051-E120-l-B919 - CMU Procedures Issue 1, December 1984 CUSTOMER MEMORY UPDATE PROCEDURE: COMMAND TITLE: CMU Command Name (Change) Access Level: 4 1 COMMAND 1 Page 1 of 1 I STEP NO. PROMPT/EXPLANATION I 1. ) DIS COMMAND NOTE: This action displays all CMU procedures that can be accessed at the access level of the current user. Note, however, that the DIS (Display) operation is allowed by many CMU procedures, even if the user is blocked from Adds, Deletes, or Changes. MNEMONICS USED IN THIS CMU PROCEDURE: Mnemonic Definition CMU Customer Memory Update (. ;